#include <deal.II/grid/tria.h>

Inheritance diagram for Triangulation< dim, spacedim >:

Classes
struct	CellWeightSum

struct	DistortedCellList

struct	Signals

Public Types
enum	MeshSmoothing { none = 0x0, limit_level_difference_at_vertices = 0x1, eliminate_unrefined_islands = 0x2, patch_level_1 = 0x4, coarsest_level_1 = 0x8, allow_anisotropic_smoothing = 0x10, eliminate_refined_inner_islands = 0x100, eliminate_refined_boundary_islands = 0x200, do_not_produce_unrefined_islands = 0x400, smoothing_on_refinement, smoothing_on_coarsening, maximum_smoothing = 0xffff ^ allow_anisotropic_smoothing }

using	cell_iterator = TriaIterator< CellAccessor< dim, spacedim > >

using	active_cell_iterator = TriaActiveIterator< CellAccessor< dim, spacedim > >

using	face_iterator = TriaIterator< TriaAccessor< dim - 1, dim, spacedim > >

using	active_face_iterator = TriaActiveIterator< TriaAccessor< dim - 1, dim, spacedim > >

using	vertex_iterator = TriaIterator<::TriaAccessor< 0, dim, spacedim > >

using	active_vertex_iterator = TriaActiveIterator<::TriaAccessor< 0, dim, spacedim > >

using	line_iterator = typename IteratorSelector::line_iterator

using	active_line_iterator = typename IteratorSelector::active_line_iterator

using	quad_iterator = typename IteratorSelector::quad_iterator

using	active_quad_iterator = typename IteratorSelector::active_quad_iterator

using	hex_iterator = typename IteratorSelector::hex_iterator

using	active_hex_iterator = typename IteratorSelector::active_hex_iterator

Public Member Functions
	Triangulation (const MeshSmoothing smooth_grid=none, const bool check_for_distorted_cells=false)

	Triangulation (const Triangulation< dim, spacedim > &)=delete

	Triangulation (Triangulation< dim, spacedim > &&tria) noexcept

Triangulation &	operator= (Triangulation< dim, spacedim > &&tria) noexcept

virtual	~Triangulation () override

virtual void	clear ()

virtual void	set_mesh_smoothing (const MeshSmoothing mesh_smoothing)

virtual const MeshSmoothing &	get_mesh_smoothing () const

void	set_manifold (const types::manifold_id number, const Manifold< dim, spacedim > &manifold_object)

void	reset_manifold (const types::manifold_id manifold_number)

void	reset_all_manifolds ()

void	set_all_manifold_ids (const types::manifold_id number)

void	set_all_manifold_ids_on_boundary (const types::manifold_id number)

void	set_all_manifold_ids_on_boundary (const types::boundary_id b_id, const types::manifold_id number)

const Manifold< dim, spacedim > &	get_manifold (const types::manifold_id number) const

virtual std::vector< types::boundary_id >	get_boundary_ids () const

virtual std::vector< types::manifold_id >	get_manifold_ids () const

virtual void	copy_triangulation (const Triangulation< dim, spacedim > &other_tria)

virtual void	create_triangulation (const std::vector< Point< spacedim >> &vertices, const std::vector< CellData< dim >> &cells, const SubCellData &subcelldata)

virtual void	create_triangulation (const TriangulationDescription::Description< dim, spacedim > &construction_data)

virtual void	create_triangulation_compatibility (const std::vector< Point< spacedim >> &vertices, const std::vector< CellData< dim >> &cells, const SubCellData &subcelldata)

void	flip_all_direction_flags ()

unsigned int	n_raw_lines (const unsigned int level) const

unsigned int	n_raw_lines () const

unsigned int	n_raw_lines (const unsigned int level) const

unsigned int	n_raw_lines () const

unsigned int	n_raw_lines (const unsigned int level) const

unsigned int	n_raw_lines () const

unsigned int	n_quads () const

unsigned int	n_quads (const unsigned int) const

unsigned int	n_raw_quads (const unsigned int) const

unsigned int	n_raw_hexs (const unsigned int) const

unsigned int	n_active_quads (const unsigned int) const

unsigned int	n_active_quads () const

unsigned int	n_quads () const

unsigned int	n_quads (const unsigned int) const

unsigned int	n_raw_quads (const unsigned int) const

unsigned int	n_raw_hexs (const unsigned int) const

unsigned int	n_active_quads (const unsigned int) const

unsigned int	n_active_quads () const

unsigned int	n_quads () const

unsigned int	n_quads (const unsigned int) const

unsigned int	n_raw_quads (const unsigned int) const

unsigned int	n_raw_hexs (const unsigned int) const

unsigned int	n_active_quads (const unsigned int) const

unsigned int	n_active_quads () const

unsigned int	n_raw_quads (const unsigned int level) const

unsigned int	n_raw_quads (const unsigned int level) const

unsigned int	n_raw_quads (const unsigned int) const

unsigned int	n_raw_quads () const

unsigned int	n_hexs () const

unsigned int	n_hexs (const unsigned int level) const

unsigned int	n_raw_hexs (const unsigned int level) const

unsigned int	n_active_hexs () const

unsigned int	n_active_hexs (const unsigned int level) const

unsigned int	max_adjacent_cells () const

unsigned int	max_adjacent_cells () const

unsigned int	max_adjacent_cells () const

bool	prepare_coarsening_and_refinement ()

bool	prepare_coarsening_and_refinement ()

bool	prepare_coarsening_and_refinement ()

Mesh refinement
void	set_all_refine_flags ()

void	refine_global (const unsigned int times=1)

virtual void	execute_coarsening_and_refinement ()

virtual bool	prepare_coarsening_and_refinement ()

History of a triangulation
void	save_refine_flags (std::ostream &out) const

void	save_refine_flags (std::vector< bool > &v) const

void	load_refine_flags (std::istream &in)

void	load_refine_flags (const std::vector< bool > &v)

void	save_coarsen_flags (std::ostream &out) const

void	save_coarsen_flags (std::vector< bool > &v) const

void	load_coarsen_flags (std::istream &out)

void	load_coarsen_flags (const std::vector< bool > &v)

bool	get_anisotropic_refinement_flag () const

User data
void	clear_user_flags ()

void	save_user_flags (std::ostream &out) const

void	save_user_flags (std::vector< bool > &v) const

void	load_user_flags (std::istream &in)

void	load_user_flags (const std::vector< bool > &v)

void	clear_user_flags_line ()

void	save_user_flags_line (std::ostream &out) const

void	save_user_flags_line (std::vector< bool > &v) const

void	load_user_flags_line (std::istream &in)

void	load_user_flags_line (const std::vector< bool > &v)

void	clear_user_flags_quad ()

void	save_user_flags_quad (std::ostream &out) const

void	save_user_flags_quad (std::vector< bool > &v) const

void	load_user_flags_quad (std::istream &in)

void	load_user_flags_quad (const std::vector< bool > &v)

void	clear_user_flags_hex ()

void	save_user_flags_hex (std::ostream &out) const

void	save_user_flags_hex (std::vector< bool > &v) const

void	load_user_flags_hex (std::istream &in)

void	load_user_flags_hex (const std::vector< bool > &v)

void	clear_user_data ()

void	save_user_indices (std::vector< unsigned int > &v) const

void	load_user_indices (const std::vector< unsigned int > &v)

void	save_user_pointers (std::vector< void * > &v) const

void	load_user_pointers (const std::vector< void * > &v)

void	save_user_indices_line (std::vector< unsigned int > &v) const

void	load_user_indices_line (const std::vector< unsigned int > &v)

void	save_user_indices_quad (std::vector< unsigned int > &v) const

void	load_user_indices_quad (const std::vector< unsigned int > &v)

void	save_user_indices_hex (std::vector< unsigned int > &v) const

void	load_user_indices_hex (const std::vector< unsigned int > &v)

void	save_user_pointers_line (std::vector< void * > &v) const

void	load_user_pointers_line (const std::vector< void * > &v)

void	save_user_pointers_quad (std::vector< void * > &v) const

void	load_user_pointers_quad (const std::vector< void * > &v)

void	save_user_pointers_hex (std::vector< void * > &v) const

void	load_user_pointers_hex (const std::vector< void * > &v)

Cell iterator functions
cell_iterator	begin (const unsigned int level=0) const

active_cell_iterator	begin_active (const unsigned int level=0) const

cell_iterator	end () const

cell_iterator	end (const unsigned int level) const

active_cell_iterator	end_active (const unsigned int level) const

cell_iterator	last () const

active_cell_iterator	last_active () const

Cell iterator functions returning ranges of iterators
IteratorRange< cell_iterator >	cell_iterators () const

IteratorRange< active_cell_iterator >	active_cell_iterators () const

IteratorRange< cell_iterator >	cell_iterators_on_level (const unsigned int level) const

IteratorRange< active_cell_iterator >	active_cell_iterators_on_level (const unsigned int level) const

Face iterator functions
face_iterator	begin_face () const

active_face_iterator	begin_active_face () const

face_iterator	end_face () const

IteratorRange< active_face_iterator >	active_face_iterators () const

Vertex iterator functions
vertex_iterator	begin_vertex () const

active_vertex_iterator	begin_active_vertex () const

vertex_iterator	end_vertex () const

Information about the triangulation
unsigned int	n_lines () const

unsigned int	n_lines (const unsigned int level) const

unsigned int	n_active_lines () const

unsigned int	n_active_lines (const unsigned int level) const

unsigned int	n_quads () const

unsigned int	n_quads (const unsigned int level) const

unsigned int	n_active_quads () const

unsigned int	n_active_quads (const unsigned int level) const

unsigned int	n_hexs () const

unsigned int	n_hexs (const unsigned int level) const

unsigned int	n_active_hexs () const

unsigned int	n_active_hexs (const unsigned int level) const

unsigned int	n_cells () const

unsigned int	n_cells (const unsigned int level) const

unsigned int	n_active_cells () const

virtual types::global_cell_index	n_global_active_cells () const

unsigned int	n_active_cells (const unsigned int level) const

unsigned int	n_faces () const

unsigned int	n_active_faces () const

unsigned int	n_levels () const

virtual unsigned int	n_global_levels () const

virtual bool	has_hanging_nodes () const

unsigned int	n_vertices () const

const std::vector< Point< spacedim > > &	get_vertices () const

unsigned int	n_used_vertices () const

bool	vertex_used (const unsigned int index) const

const std::vector< bool > &	get_used_vertices () const

unsigned int	max_adjacent_cells () const

virtual types::subdomain_id	locally_owned_subdomain () const

Triangulation< dim, spacedim > &	get_triangulation ()

const Triangulation< dim, spacedim > &	get_triangulation () const

Internal information about the number of objects
unsigned int	n_raw_lines () const

unsigned int	n_raw_lines (const unsigned int level) const

unsigned int	n_raw_quads () const

unsigned int	n_raw_quads (const unsigned int level) const

unsigned int	n_raw_hexs (const unsigned int level) const

unsigned int	n_raw_cells (const unsigned int level) const

unsigned int	n_raw_faces () const

virtual std::size_t	memory_consumption () const

template<class Archive >
void	save (Archive &ar, const unsigned int version) const

template<class Archive >
void	load (Archive &ar, const unsigned int version)

virtual void	add_periodicity (const std::vector< GridTools::PeriodicFacePair< cell_iterator >> &)

const std::map< std::pair< cell_iterator, unsigned int >, std::pair< std::pair< cell_iterator, unsigned int >, std::bitset< 3 > > > &	get_periodic_face_map () const

template<class Archive >
void	serialize (Archive &archive, const unsigned int version)

Public Member Functions inherited from Subscriptor
	Subscriptor ()

	Subscriptor (const Subscriptor &)

	Subscriptor (Subscriptor &&) noexcept

virtual	~Subscriptor ()

Subscriptor &	operator= (const Subscriptor &)

Subscriptor &	operator= (Subscriptor &&) noexcept

void	subscribe (std::atomic< bool > *const validity, const std::string &identifier="") const

void	unsubscribe (std::atomic< bool > *const validity, const std::string &identifier="") const

unsigned int	n_subscriptions () const

template<typename StreamType >
void	list_subscribers (StreamType &stream) const

void	list_subscribers () const

template<class Archive >
void	serialize (Archive &ar, const unsigned int version)

Static Public Attributes
static const unsigned int	dimension = dim

static const unsigned int	space_dimension = spacedim

Private Types
using	IteratorSelector = ::internal::TriangulationImplementation::Iterators< dim, spacedim >

Private Member Functions
Line iterator functions for internal use
raw_line_iterator	begin_raw_line (const unsigned int level=0) const

line_iterator	begin_line (const unsigned int level=0) const

active_line_iterator	begin_active_line (const unsigned int level=0) const

line_iterator	end_line () const

Quad iterator functions for internal use
raw_quad_iterator	begin_raw_quad (const unsigned int level=0) const

quad_iterator	begin_quad (const unsigned int level=0) const

active_quad_iterator	begin_active_quad (const unsigned int level=0) const

quad_iterator	end_quad () const

Keeping up with what happens to a triangulation
enum	CellStatus { CELL_PERSIST, CELL_REFINE, CELL_COARSEN, CELL_INVALID }

Signals	signals

Exceptions
MeshSmoothing	smooth_grid

std::vector< GridTools::PeriodicFacePair< cell_iterator > >	periodic_face_pairs_level_0

std::map< std::pair< cell_iterator, unsigned int >, std::pair< std::pair< cell_iterator, unsigned int >, std::bitset< 3 > > >	periodic_face_map

static ::ExceptionBase &	ExcInvalidLevel (int arg1, int arg2)

static ::ExceptionBase &	ExcTriangulationNotEmpty (int arg1, int arg2)

static ::ExceptionBase &	ExcGridReadError ()

static ::ExceptionBase &	ExcFacesHaveNoLevel ()

static ::ExceptionBase &	ExcEmptyLevel (int arg1)

static ::ExceptionBase &	ExcNonOrientableTriangulation ()

static ::ExceptionBase &	ExcBoundaryIdNotFound (types::boundary_id arg1)

static ::ExceptionBase &	ExcInconsistentCoarseningFlags ()

static void	write_bool_vector (const unsigned int magic_number1, const std::vector< bool > &v, const unsigned int magic_number2, std::ostream &out)

static void	read_bool_vector (const unsigned int magic_number1, std::vector< bool > &v, const unsigned int magic_number2, std::istream &in)

void	update_periodic_face_map ()

Cell iterator functions for internal use
using	raw_cell_iterator = TriaRawIterator< CellAccessor< dim, spacedim > >

using	raw_face_iterator = TriaRawIterator< TriaAccessor< dim - 1, dim, spacedim > >

using	raw_vertex_iterator = TriaRawIterator<::TriaAccessor< 0, dim, spacedim > >

using	raw_line_iterator = typename IteratorSelector::raw_line_iterator

using	raw_quad_iterator = typename IteratorSelector::raw_quad_iterator

using	raw_hex_iterator = typename IteratorSelector::raw_hex_iterator

raw_cell_iterator	begin_raw (const unsigned int level=0) const

raw_cell_iterator	end_raw (const unsigned int level) const

Hex iterator functions for internal use
std::vector< std::unique_ptr< ::internal::TriangulationImplementation::TriaLevel< dim > > >	levels

std::unique_ptr<::internal::TriangulationImplementation::TriaFaces< dim > >	faces

std::vector< Point< spacedim > >	vertices

std::vector< bool >	vertices_used

std::map< types::manifold_id, std::unique_ptr< const Manifold< dim, spacedim > > >	manifold

bool	anisotropic_refinement

const bool	check_for_distorted_cells

::internal::TriangulationImplementation::NumberCache< dim >	number_cache

std::unique_ptr< std::map< unsigned int, types::boundary_id > >	vertex_to_boundary_id_map_1d

std::unique_ptr< std::map< unsigned int, types::manifold_id > >	vertex_to_manifold_id_map_1d

template<int , int , int >
class	TriaAccessorBase

template<int , int , int >
class	TriaAccessor

class	TriaAccessor< 0, 1, spacedim >

class	CellAccessor< dim, spacedim >

struct	::internal::TriaAccessorImplementation::Implementation

class	hp::DoFHandler< dim, spacedim >

struct	::internal::TriangulationImplementation::Implementation

template<typename >
class	::internal::TriangulationImplementation::TriaObjects

class	CellId

raw_hex_iterator	begin_raw_hex (const unsigned int level=0) const

hex_iterator	begin_hex (const unsigned int level=0) const

active_hex_iterator	begin_active_hex (const unsigned int level=0) const

hex_iterator	end_hex () const

void	clear_despite_subscriptions ()

void	reset_active_cell_indices ()

DistortedCellList	execute_refinement ()

void	execute_coarsening ()

void	fix_coarsen_flags ()

virtual unsigned int	coarse_cell_id_to_coarse_cell_index (const types::coarse_cell_id coarse_cell_id) const

virtual types::coarse_cell_id	coarse_cell_index_to_coarse_cell_id (const unsigned int coarse_cell_index) const

Additional Inherited Members
Static Public Member Functions inherited from Subscriptor
static ::ExceptionBase &	ExcInUse (int arg1, std::string arg2, std::string arg3)

static ::ExceptionBase &	ExcNoSubscriber (std::string arg1, std::string arg2)

Detailed Description

template<int dim, int spacedim = dim>
class Triangulation< dim, spacedim >

Triangulations denote a hierarchy of levels of elements which together form a dim -dimensional manifold in spacedim spatial dimensions (if spacedim is not specified it takes the default value spacedim=dim).

Thus, for example, an object of type Triangulation<1,1> (or simply Triangulation<1> since spacedim==dim by default) is used to represent and handle the usual one-dimensional triangulation used in the finite element method (so, segments on a straight line). On the other hand, objects such as Triangulation<1,2> or Triangulation<2,3> (that are associated with curves in 2D or surfaces in 3D) are the ones one wants to use in the boundary element method.

This class is written to be as independent of the dimension as possible (thus the complex construction of the internal::TriangulationImplementation::TriaLevel classes) to allow code-sharing, to allow reducing the need to mirror changes in the code for one dimension to the code for other dimensions. Nonetheless, some of the functions are dependent of the dimension and there only exist specialized versions for distinct dimensions.

This class satisfies the MeshType concept requirements.

Structure and iterators

The actual data structure of a Triangulation object is rather complex and quite inconvenient if one attempted to operate on it directly, since data is spread over quite a lot of arrays and other places. However, there are ways powerful enough to work on these data structures without knowing their exact relations. deal.II uses class local alias (see below) to make things as easy and dimension independent as possible.

The Triangulation class provides iterators which enable looping over all cells without knowing the exact representation used to describe them. For more information see the documentation of TriaIterator. Their names are alias imported from the Iterators class (thus making them local types to this class) and are as follows:

cell_iterator: loop over all cells used in the Triangulation
active_cell_iterator: loop over all active cells

For dim==1, these iterators are mapped as follows:

using cell_iterator = line_iterator;

using active_cell_iterator = active_line_iterator;

while for dim==2 we have the additional face iterator:

using cell_iterator = quad_iterator;
using active_cell_iterator = active_quad_iterator;
 
using face_iterator = line_iterator;
using active_face_iterator = active_line_iterator;

By using the cell iterators, you can write code independent of the spatial dimension. The same applies for substructure iterators, where a substructure is defined as a face of a cell. The face of a cell is a vertex in 1D and a line in 2D; however, vertices are handled in a different way and therefore lines have no faces.

The Triangulation class offers functions like begin_active() which gives you an iterator to the first active cell. There are quite a lot of functions returning iterators. Take a look at the class doc to get an overview.

Usage of these iterators is similar to usage of standard container iterators. Some examples taken from the Triangulation source code follow (notice that in the last two examples the template parameter spacedim has been omitted, so it takes the default value dim).

Counting the number of cells on a specific level
template <int dim, int spacedim>

unsigned int

Triangulation<dim, spacedim>::n_cells (const int level) const

{

int n=0;

for (const auto &cell : cell_iterators_on_level(level))

++n;

return n;

}

Another way, which uses std::distance, would be to write
template <int dim>

unsigned int

Triangulation<dim>::n_cells (const int level) const

{

int n=0;

distance (begin(level),

(level == levels.size()-1 ?

cell_iterator(end()) :

begin (level+1)),

n);

return n;

}
Refining all cells of a triangulation
template <int dim>

void Triangulation<dim>::refine_global ()

{

for (const auto &cell : active_cell_iterators())

cell->set_refine_flag ();

execute_coarsening_and_refinement ();

}

Usage

Usage of a Triangulation is mainly done through the use of iterators. An example probably shows best how to use it:

int main ()
{
  Triangulation<2> tria;
 
  // read in a coarse grid file
 
  // we want to log the refinement history
  ofstream history ("mesh.history");
 
  // refine first cell
  tria.begin_active()->set_refine_flag();
  tria.save_refine_flags (history);
  tria.execute_coarsening_and_refinement ();
 
  // refine first active cell on coarsest level
  tria.begin_active()->set_refine_flag ();
  tria.save_refine_flags (history);
  tria.execute_coarsening_and_refinement ();
 
  Triangulation<2>::active_cell_iterator cell;
  for (int i=0; i<17; ++i)
    {
      // refine the presently second last cell 17 times
      cell = tria.last_active(tria.n_levels()-1);
      --cell;
      cell->set_refine_flag ();
      tria.save_refine_flags (history);
      tria.execute_coarsening_and_refinement ();
    };
  // output the grid
  ofstream out("grid.1");
  GridOut::write_gnuplot (tria, out);
}

Creating a triangulation

There are several possibilities to create a triangulation:

The most common domains, such as hypercubes (i.e. lines, squares, cubes, etc), hyper-balls (circles, balls, ...) and some other, more weird domains such as the L-shape region and higher dimensional generalizations and others, are provided by the GridGenerator class which takes a triangulation and fills it by a division of the required domain.
Reading in a triangulation: By using an object of the GridIn class, you can read in fairly general triangulations. See there for more information. The mentioned class uses the interface described directly below to transfer the data into the triangulation.
Explicitly creating a triangulation: you can create a triangulation by providing a list of vertices and a list of cells. Each such cell consists of a vector storing the indices of the vertices of this cell in the vertex list. To see how this works, you can take a look at the GridIn<dim>::read_* functions. The appropriate function to be called is create_triangulation().

Creating the hierarchical information needed for this library from cells storing only vertex information can be quite a complex task. For example in 2D, we have to create lines between vertices (but only once, though there are two cells which link these two vertices) and we have to create neighborhood information. Grids being read in should therefore not be too large, reading refined grids would be inefficient (although there is technically no problem in reading grids with several 10.000 or 100.000 cells; the library can handle this without much problems). Apart from the performance aspect, refined grids do not lend too well to multigrid algorithms, since solving on the coarsest level is expensive. It is wiser in any case to read in a grid as coarse as possible and then do the needed refinement steps.

It is your duty to guarantee that cells have the correct orientation. To guarantee this, in the input vector keeping the cell list, the vertex indices for each cell have to be in a defined order, see the documentation of GeometryInfo<dim>. In one dimension, the first vertex index must refer to that vertex with the lower coordinate value. In 2D and 3D, the corresponding conditions are not easy to verify and no full attempt to do so is made. If you violate this condition, you may end up with matrix entries having the wrong sign (clockwise vertex numbering, which results in a negative area element) of with wrong matrix elements (twisted quadrilaterals, i.e. two vertices interchanged; this results in a wrong area element).

There are more subtle conditions which must be imposed upon the vertex numbering within cells. They do not only hold for the data read from an UCD or any other input file, but also for the data passed to create_triangulation(). See the documentation for the GridIn class for more details on this, and above all to the GridReordering class that explains many of the problems and an algorithm to reorder cells such that they satisfy the conditions outlined above.
Copying a triangulation: when computing on time dependent meshes or when using adaptive refinement, you will often want to create a new triangulation to be the same as another one. This is facilitated by the copy_triangulation function.

It is guaranteed that vertex, line or cell numbers in the two triangulations are the same and that two iterators walking on the two triangulations visit matching cells if they are incremented in parallel. It may be conceivable to implement a clean-up in the copy operation, which eliminates holes of unused memory, re-joins scattered data and so on. In principle this would be a useful operation but guaranteeing some parallelism in the two triangulations seems more important since usually data will have to be transferred between the grids.

Finally, there is a special function for folks who like bad grids: distort_random(). It moves all the vertices in the grid a bit around by a random value, leaving behind a distorted mesh. Note that you should apply this function to the final mesh, since refinement smoothes the mesh a bit.

The function will make sure that vertices on restricted faces (hanging nodes) will end up in the correct place, i.e. in the middle of the two other vertices of the mother line, and the analogue in higher space dimensions (vertices on the boundary are not corrected, so don't distort boundary vertices in more than two space dimension, i.e. in dimensions where boundary vertices can be hanging nodes). Applying the algorithm has another drawback related to the placement of cells, however: the children of a cell will not occupy the same region of the domain as the mother cell does. While this is the usual behavior with cells at the boundary, here you may get into trouble when using multigrid algorithms or when transferring solutions from coarse to fine grids and back. In general, the use of this function is only safe if you only use the most refined level of the triangulation for computations.

Refinement and coarsening of a triangulation

Refinement of a triangulation may be done through several ways. The most low-level way is directly through iterators: let i be an iterator to an active cell (i.e. the cell pointed to has no children), then the function call i->set_refine_flag() marks the respective cell for refinement. Marking non-active cells results in an error.

After all the cells you wanted to mark for refinement, call execute_coarsening_and_refinement() to actually perform the refinement. This function itself first calls the prepare_coarsening_and_refinement function to regularize the resulting triangulation: since a face between two adjacent cells may only be subdivided once (i.e. the levels of two adjacent cells may differ by one at most; it is not possible to have a cell refined twice while the neighboring one is not refined), some additional cells are flagged for refinement to smooth the grid. This enlarges the number of resulting cells but makes the grid more regular, thus leading to better approximation properties and, above all, making the handling of data structures and algorithms much easier. To be honest, this is mostly an algorithmic step than one needed by the finite element method.

To coarsen a grid, the same way as above is possible by using i->set_coarsen_flag and calling execute_coarsening_and_refinement().

The reason for first coarsening, then refining is that the refinement usually adds some additional cells to keep the triangulation regular and thus satisfies all refinement requests, while the coarsening does not delete cells not requested for; therefore the refinement will often revert some effects of coarsening while the opposite is not true. The stated order of coarsening before refinement will thus normally lead to a result closer to the intended one.

Marking cells for refinement 'by hand' through iterators is one way to produce a new grid, especially if you know what kind of grid you are looking for, e.g. if you want to have a grid successively refined towards the boundary or always at the center (see the example programs, they do exactly these things). There are more advanced functions, however, which are more suitable for automatic generation of hierarchical grids in the context of a posteriori error estimation and adaptive finite elements. These functions can be found in the GridRefinement class.

Smoothing of a triangulation

Some degradation of approximation properties has been observed for grids which are too unstructured. Therefore, prepare_coarsening_and_refinement() which is automatically called by execute_coarsening_and_refinement() can do some smoothing of the triangulation. Note that mesh smoothing is only done for two or more space dimensions, no smoothing is available at present for one spatial dimension. In the following, let execute_* stand for execute_coarsening_and_refinement().

For the purpose of smoothing, the Triangulation constructor takes an argument specifying whether a smoothing step shall be performed on the grid each time execute_* is called. The default is that such a step not be done, since this results in additional cells being produced, which may not be necessary in all cases. If switched on, calling execute_* results in flagging additional cells for refinement to avoid vertices as the ones mentioned. The algorithms for both regularization and smoothing of triangulations are described below in the section on technical issues. The reason why this parameter must be given to the constructor rather than to execute_* is that it would result in algorithmic problems if you called execute_* once without and once with smoothing, since then in some refinement steps would need to be refined twice.

The parameter taken by the constructor is an integer which may be composed bitwise by the constants defined in the enum MeshSmoothing (see there for the possibilities).

Note: While it is possible to pass all of the flags in MeshSmoothing to objects of type parallel::distributed::Triangulation, it is not always possible to honor all of these smoothing options if they would require knowledge of refinement/coarsening flags on cells not locally owned by this processor. As a consequence, for some of these flags, the ultimate number of cells of the parallel triangulation may depend on the number of processors into which it is partitioned.

Material and boundary information

Each cell, face or edge stores information denoting the material or the part of the boundary that an object belongs to. The material id of a cell is typically used to identify which cells belong to a particular part of the domain, e.g., when you have different materials (steel, concrete, wood) that are all part of the same domain. One would then usually query the material id associated with a cell during assembly of the bilinear form, and use it to determine (e.g., by table lookup, or a sequence of if-else statements) what the correct material coefficients would be for that cell. See also this glossary entry.

This material_id may be set upon construction of a triangulation (through the CellData data structure), or later through use of cell iterators. For a typical use of this functionality, see the step-28 tutorial program. The functions of the GridGenerator namespace typically set the material ID of all cells to zero. When reading a triangulation through the GridIn class, different input file formats have different conventions, but typically either explicitly specify the material id, or if they don't, then GridIn simply sets them to zero. Because the material of a cell is intended to pertain to a particular region of the domain, material ids are inherited by child cells from their parent upon mesh refinement.

Boundary indicators on lower dimensional objects (these have no material id) indicate the number of a boundary component. The weak formulation of the partial differential equation may have different boundary conditions on different parts of the boundary. The boundary indicator can be used in creating the matrix or the right hand side vector to indicate these different parts of the model (this use is like the material id of cells). Boundary indicators may be in the range from zero to numbers::internal_face_boundary_id-1. The value numbers::internal_face_boundary_id is reserved to denote interior lines (in 2D) and interior lines and quads (in 3D), which do not have a boundary indicator. This way, a program can easily determine, whether such an object is at the boundary or not. Material indicators may be in the range from zero to numbers::invalid_material_id-1.

Lines in two dimensions and quads in three dimensions inherit their boundary indicator to their children upon refinement. You should therefore make sure that if you have different boundary parts, the different parts are separated by a vertex (in 2D) or a line (in 3D) such that each boundary line or quad has a unique boundary indicator.

By default (unless otherwise specified during creation of a triangulation), all parts of the boundary have boundary indicator zero. As a historical wart, this isn't true for 1d meshes, however: For these, leftmost vertices have boundary indicator zero while rightmost vertices have boundary indicator one. In either case, the boundary indicator of a face can be changed using a call of the kind cell->face(1)->set_boundary_id(42);.

See also: Glossary entry on boundary indicators

History of a triangulation

It is possible to reconstruct a grid from its refinement history, which can be stored and loaded through the save_refine_flags and load_refine_flags functions. Normally, the code will look like this:

// open output file
std::ofstream history("mesh.history");
// do 10 refinement steps
for (unsigned int step=0; step<10; ++step)
  {
    ...;
    // flag cells according to some criterion
    ...;
    tria.save_refine_flags (history);
    tria.execute_coarsening_and_refinement ();
  }

If you want to re-create the grid from the stored information, you write:

// open input file
std::ifstream history("mesh.history");
// do 10 refinement steps
for (unsigned int step=0; step<10; ++step)
  {
    tria.load_refine_flags (history);
    tria.execute_coarsening_and_refinement ();
  }

The same scheme is employed for coarsening and the coarsening flags.

You may write other information to the output file between different sets of refinement information, as long as you read it upon re-creation of the grid. You should make sure that the other information in the new triangulation which is to be created from the saved flags, matches that of the old triangulation, for example the smoothing level; if not, the cells actually created from the flags may be other ones, since smoothing adds additional cells, but their number may be depending on the smoothing level.

There actually are two sets of save_*_flags and load_*_flags functions. One takes a stream as argument and reads/writes the information from/to the stream, thus enabling storing flags to files. The other set takes an argument of type vector<bool>. This enables the user to temporarily store some flags, e.g. if another function needs them, and restore them afterwards.

User flags and data

A triangulation offers one bit per line, quad, etc for user flags. This field can be accessed as all other data using iterators. Normally, this user flag is used if an algorithm walks over all cells and needs information whether another cell, e.g. a neighbor, has already been processed. See the glossary for more information.

There is another set of user data, which can be either an unsigned int or a void *, for each line, quad, etc. You can access these through the functions listed under User data in the accessor classes. Again, see the glossary for more information.

The value of these user indices or pointers is nullptr by default. Note that the pointers are not inherited to children upon refinement. Still, after a remeshing they are available on all cells, where they were set on the previous mesh.

The usual warning about the missing type safety of void pointers are obviously in place here; responsibility for correctness of types etc lies entirely with the user of the pointer.

Note: User pointers and user indices are stored in the same place. In order to avoid unwanted conversions, Triangulation checks which one of them is in use and does not allow access to the other one, until clear_user_data() has been called.

Describing curved geometries

deal.II implements all geometries (curved and otherwise) with classes inheriting from Manifold; see the documentation of Manifold, step-49, or the Manifold description for triangulations module for examples and a complete description of the algorithms. By default, all cells in a Triangulation have a flat geometry, meaning that all lines in the Triangulation are assumed to be straight. If a cell has a manifold_id that is not equal to numbers::flat_manifold_id then the Triangulation uses the associated Manifold object for computations on that cell (e.g., cell refinement). Here is a quick example, taken from the implementation of GridGenerator::hyper_ball(), that sets up a polar grid:

int main ()
{
  Triangulation<2> triangulation;
  const std::vector<Point<2>> vertices = {{-1.0,-1.0},
                                          {+1.0,-1.0},
                                          {-0.5,-0.5},
                                          {+0.5,-0.5},
                                          {-0.5,+0.5},
                                          {+1.0,+1.0},
                                          {-1.0,+1.0},
                                          {+1.0,+1.0}};
  const std::vector<std::array<int,GeometryInfo<2>::vertices_per_cell>>
    cell_vertices = {{0, 1, 2, 3},
                     {0, 2, 6, 4},
                     {2, 3, 4, 5},
                     {1, 7, 3, 5},
                     {6, 4, 7, 5}};
 
  std::vector<CellData<2>> cells(cell_vertices.size(), CellData<2>());
  for (unsigned int i=0; i<cell_vertices.size(); ++i)
    for (unsigned int j=0; j<GeometryInfo<2>::vertices_per_cell; ++j)
      cells[i].vertices[j] = cell_vertices[i][j];
 
  triangulation.create_triangulation (vertices, cells, SubCellData());
  triangulation.set_all_manifold_ids_on_boundary(42);
 
  // set_manifold stores a copy of its second argument,
  // so a temporary is okay
  triangulation.set_manifold(42, PolarManifold<2>());
  for (unsigned int i = 0; i < 4; ++i)
    {
      // refine all boundary cells
      for (const auto &cell : triangulation.active_cell_iterators())
        if (cell->at_boundary())
          cell->set_refine_flag();
 
      triangulation.execute_coarsening_and_refinement();
    }
}

This will set up a grid where the boundary lines will be refined by performing calculations in polar coordinates. When the mesh is refined the cells adjacent to the boundary will use this new line midpoint (as well as the other three midpoints and original cell vertices) to calculate the cell midpoint with a transfinite interpolation: this propagates the curved boundary into the interior in a smooth way. It is possible to generate a better grid (which interpolates across all cells between two different Manifold descriptions, instead of just going one cell at a time) by using TransfiniteInterpolationManifold; see the documentation of that class for more information.

You should take note of one caveat: if you have concave boundaries, you must make sure that a new boundary vertex does not lie too much inside the cell which is to be refined. The reason is that the center vertex is placed at the point which is a weighted average of the vertices of the original cell, new face midpoints, and (in 3D) new line midpoints. Therefore if your new boundary vertex is too near the center of the old quadrilateral or hexahedron, the distance to the midpoint vertex will become too small, thus generating distorted cells. This issue is discussed extensively in distorted cells.

Getting notice when a triangulation changes

There are cases where one object would like to know whenever a triangulation is being refined, copied, or modified in a number of other ways. This could of course be achieved if, in your user code, you tell every such object whenever you are about to refine the triangulation, but this will get tedious and is error prone. The Triangulation class implements a more elegant way to achieve this: signals.

In essence, a signal is an object (a member of the Triangulation class) that another object can connect to. A connection is in essence that the connecting object passes a function object taking a certain number and kind of arguments. Whenever the owner of the signal wants to indicate a certain kind of event, it 'triggers' the signal, which in turn means that all connections of the signal are triggered: in other word, the function objects are executed and can take the action that is necessary.

As a simple example, the following code will print something to the output every time the triangulation has just been refined:

void f()
{
  std::cout << "Triangulation has been refined." << std::endl;
}
 
void run ()
{
  Triangulation<dim> triangulation;
  // fill it somehow
  triangulation.signals.post_refinement.connect (&f);
  triangulation.refine_global (2);
}

This code will produce output twice, once for each refinement cycle.

A more interesting application would be the following, akin to what the FEValues class does. This class stores a pointer to a triangulation and also an iterator to the cell last handled (so that it can compare the current cell with the previous one and, for example, decide that there is no need to re-compute the Jacobian matrix if the new cell is a simple translation of the previous one). However, whenever the triangulation is modified, the iterator to the previously handled cell needs to be invalidated since it now no longer points to any useful cell (or, at the very least, points to something that may not necessarily resemble the cells previously handled). The code would look something like this (the real code has some more error checking and has to handle the case that subsequent cells might actually belong to different triangulation, but that is of no concern to us here):

template <int dim>
class FEValues
{
  Triangulation<dim>::active_cell_iterator current_cell, previous_cell;
public:
  void reinit (Triangulation<dim>::active_cell_iterator &cell);
  void invalidate_previous_cell ();
};
 
template <int dim>
void
FEValues<dim>::reinit (Triangulation<dim>::active_cell_iterator &cell)
{
  if (previous_cell.status() != valid)
    {
      // previous_cell has not been set. set it now, and register with the
      // triangulation that we want to be informed about mesh refinement
      previous_cell = current_cell;
      previous_cell->get_triangulation().signals.post_refinement.connect(
        [this]()
        {
          this->invalidate_previous_cell();
        });
    }
  else
   previous_cell = current_cell;
 
  current_cell = cell;
  // ... do something with the cell...
}
 
template <int dim>
void
FEValues<dim>::invalidate_previous_cell ()
{
  previous_cell = Triangulation<dim>::active_cell_iterator();
}

Here, whenever the triangulation is refined, it triggers the post- refinement signal which calls the function object attached to it. This function object is the member function FEValues<dim>::invalidate_previous_cell where we have bound the single argument (the this pointer of a member function that otherwise takes no arguments) to the this pointer of the FEValues object. Note how here there is no need for the code that owns the triangulation and the FEValues object to inform the latter if the former is refined. (In practice, the function would want to connect to some of the other signals that the triangulation offers as well, in particular to creation and deletion signals.)

The Triangulation class has a variety of signals that indicate different actions by which the triangulation can modify itself and potentially require follow-up action elsewhere. Please refer to Triangulation::Signals for details.

Serializing (loading or storing) triangulations

Like many other classes in deal.II, the Triangulation class can stream its contents to an archive using BOOST's serialization facilities. The data so stored can later be retrieved again from the archive to restore the contents of this object. This facility is frequently used to save the state of a program to disk for possible later resurrection, often in the context of checkpoint/restart strategies for long running computations or on computers that aren't very reliable (e.g. on very large clusters where individual nodes occasionally fail and then bring down an entire MPI job).

For technical reasons, writing and restoring a Triangulation object is not trivial. The primary reason is that unlike many other objects, triangulations rely on many other objects to which they store pointers or with which they interface; for example, triangulations store pointers to objects describing boundaries and manifolds, and they have signals that store pointers to other objects so they can be notified of changes in the triangulation (see the section on signals in this introduction). Since these objects are owned by the user space (for example the user can create a custom manifold object), they may not be serializable. So in cases like this, boost::serialize can store a reference to an object instead of the pointer, but the reference will never be satisfied at write time because the object pointed to is not serialized. Clearly, at load time, boost::serialize will not know where to let the pointer point to because it never gets to re-create the object originally pointed to.

For these reasons, saving a triangulation to an archive does not store all information, but only certain parts. More specifically, the information that is stored is everything that defines the mesh such as vertex locations, vertex indices, how vertices are connected to cells, boundary indicators, subdomain ids, material ids, etc. On the other hand, the following information is not stored:

signals
pointers to Manifold objects previously set using Triangulation::set_manifold On the other hand, since these are objects that are usually set in user code, they can typically easily be set again in that part of your code in which you re-load triangulations.

In a sense, this approach to serialization means that re-loading a triangulation is more akin to calling the Triangulation::create_triangulation function and filling it with some additional content, as that function also does not touch the signals and boundary objects that belong to this triangulation. In keeping with this analogy, the Triangulation::load function also triggers the same kinds of signal as Triangulation::create_triangulation.

Technical details

Algorithms for mesh regularization and smoothing upon refinement

We chose an inductive point of view: since upon creation of the triangulation all cells are on the same level, all regularity assumptions regarding the maximum difference in level of cells sharing a common face, edge or vertex hold. Since we use the regularization and smoothing in each step of the mesh history, when coming to the point of refining it further the assumptions also hold.

The regularization and smoothing is done in the prepare_coarsening_and_refinement function, which is called by execute_coarsening_and_refinement at the very beginning. It decides which additional cells to flag for refinement by looking at the old grid and the refinement flags for each cell.

Regularization: The algorithm walks over all cells checking whether the present cell is flagged for refinement and a neighbor of the present cell is refined once less than the present one. If so, flag the neighbor for refinement. Because of the induction above, there may be no neighbor with level two less than the present one.

The neighbor thus flagged for refinement may induce more cells which need to be refined. However, such cells which need additional refinement always are on one level lower than the present one, so we can get away with only one sweep over all cells if we do the loop in the reverse way, starting with those on the highest level. This way, we may flag additional cells on lower levels, but if these induce more refinement needed, this is performed later on when we visit them in out backward running loop.
Smoothing:
- limit_level_difference_at_vertices: First a list is set up which stores for each vertex the highest level one of the adjacent cells belongs to. Now, since we did smoothing in the previous refinement steps also, each cell may only have vertices with levels at most one greater than the level of the present cell.
  
  However, if we store the level plus one for cells marked for refinement, we may end up with cells which have vertices of level two greater than the cells level. We need to refine this cell also, and need thus also update the levels of its vertices. This itself may lead to cells needing refinement, but these are on lower levels, as above, which is why we may do all kinds of additional flagging in one loop only.
- eliminate_unrefined_islands: For each cell we count the number of neighbors which are refined or flagged for refinement. If this exceeds the number of neighbors which are not refined and not flagged for refinement, then the current cell is flagged for refinement. Since this may lead to cells on the same level which also will need refinement, we will need additional loops of regularization and smoothing over all cells until nothing changes any more.
- eliminate_refined_*_islands: This one does much the same as the above one, but for coarsening. If a cell is flagged for refinement or if all of its children are active and if the number of neighbors which are either active and not flagged for refinement, or not active but all children flagged for coarsening equals the total number of neighbors, then this cell's children are flagged for coarsening or (if this cell was flagged for refinement) the refine flag is cleared.
  
  For a description of the distinction between the two versions of the flag see above in the section about mesh smoothing in the general part of this classes description.
  
  The same applies as above: several loops may be necessary.

Regularization and smoothing are a bit complementary in that we check whether we need to set additional refinement flags when being on a cell flagged for refinement (regularization) or on a cell not flagged for refinement. This makes readable programming easier.

All the described algorithms apply only for more than one space dimension, since for one dimension no restrictions apply. It may be necessary to apply some smoothing for multigrid algorithms, but this has to be decided upon later.

Warning

It seems impossible to preserve constness of a triangulation through iterator usage. Thus, if you declare pointers to a const triangulation object, you should be well aware that you might involuntarily alter the data stored in the triangulation.

Author: Wolfgang Bangerth, 1998; Ralf Hartmann, 2005

Definition at line 1109 of file tria.h.

Member Typedef Documentation

◆ IteratorSelector

template<int dim, int spacedim = dim>

using Triangulation< dim, spacedim >::IteratorSelector = ::internal::TriangulationImplementation::Iterators<dim, spacedim>

private

An internal alias to make the definition of the iterator classes simpler.

Definition at line 1117 of file tria.h.

◆ raw_cell_iterator

template<int dim, int spacedim = dim>

using Triangulation< dim, spacedim >::raw_cell_iterator = TriaRawIterator<CellAccessor<dim, spacedim> >

private

Declare a number of iterator types for raw iterators, i.e., iterators that also iterate over holes in the list of cells left by cells that have been coarsened away in previous mesh refinement cycles.

Since users should never have to access these internal properties of how we store data, these iterator types are made private.

Definition at line 3489 of file tria.h.

◆ raw_face_iterator

template<int dim, int spacedim = dim>

using Triangulation< dim, spacedim >::raw_face_iterator = TriaRawIterator<TriaAccessor<dim - 1, dim, spacedim> >

private

Definition at line 3491 of file tria.h.

◆ raw_vertex_iterator

template<int dim, int spacedim = dim>

using Triangulation< dim, spacedim >::raw_vertex_iterator = TriaRawIterator<::TriaAccessor<0, dim, spacedim> >

private

Definition at line 3493 of file tria.h.

◆ raw_line_iterator

template<int dim, int spacedim = dim>

using Triangulation< dim, spacedim >::raw_line_iterator = typename IteratorSelector::raw_line_iterator

private

Definition at line 3494 of file tria.h.

◆ raw_quad_iterator

template<int dim, int spacedim = dim>

using Triangulation< dim, spacedim >::raw_quad_iterator = typename IteratorSelector::raw_quad_iterator

private

Definition at line 3495 of file tria.h.

◆ raw_hex_iterator

template<int dim, int spacedim = dim>

using Triangulation< dim, spacedim >::raw_hex_iterator = typename IteratorSelector::raw_hex_iterator

private

Definition at line 3496 of file tria.h.

Member Enumeration Documentation

◆ MeshSmoothing

template<int dim, int spacedim = dim>

enum Triangulation::MeshSmoothing

Declare some symbolic names for mesh smoothing algorithms. The meaning of these flags is documented in the Triangulation class.

Enumerator
none	No mesh smoothing at all, except that meshes have to remain one- irregular.
limit_level_difference_at_vertices	It can be shown, that degradation of approximation occurs if the triangulation contains vertices which are member of cells with levels differing by more than one. One such example is the following: It would seem that in two space dimensions, the maximum jump in levels between cells sharing a common vertex is two (as in the example above). However, this is not true if more than four cells meet at a vertex. It is not uncommon that a coarse (initial) mesh contains vertices at which six or even eight cells meet, when small features of the domain have to be resolved even on the coarsest mesh. In that case, the maximum difference in levels is three or four, respectively. The problem gets even worse in three space dimensions. Looking at an interpolation of the second derivative of the finite element solution (assuming bilinear finite elements), one sees that the numerical solution is almost totally wrong, compared with the true second derivative. Indeed, on regular meshes, there exist sharp estimations that the H²-error is only of order one, so we should not be surprised; however, the numerical solution may show a value for the second derivative which may be a factor of ten away from the true value. These problems are located on the small cell adjacent to the center vertex, where cells of non-subsequent levels meet, as well as on the upper and right neighbor of this cell (but with a less degree of deviation from the true value). If the smoothing indicator given to the constructor contains the bit for limit_level_difference_at_vertices, situations as the above one are eliminated by also marking the upper right cell for refinement. In case of anisotropic refinement, the level of a cell is not linked to the refinement of a cell as directly as in case of isotropic refinement. Furthermore, a cell can be strongly refined in one direction and not or at least much less refined in another. Therefore, it is very difficult to decide, which cases should be excluded from the refinement process. As a consequence, when using anisotropic refinement, the limit_level_difference_at_vertices flag must not be set. On the other hand, the implementation of multigrid methods in deal.II requires that this bit be set.
eliminate_unrefined_islands	Single cells which are not refined and are surrounded by cells which are refined usually also lead to a sharp decline in approximation properties locally. The reason is that the nodes on the faces between unrefined and refined cells are not real degrees of freedom but carry constraints. The patch without additional degrees of freedom is thus significantly larger then the unrefined cell itself. If in the parameter passed to the constructor the bit for eliminate_unrefined_islands is set, all cells which are not flagged for refinement but which are surrounded by more refined cells than unrefined cells are flagged for refinement. Cells which are not yet refined but flagged for that are accounted for the number of refined neighbors. Cells on the boundary are not accounted for at all. An unrefined island is, by this definition also a cell which (in 2D) is surrounded by three refined cells and one unrefined one, or one surrounded by two refined cells, one unrefined one and is at the boundary on one side. It is thus not a true island, as the name of the flag may indicate. However, no better name came to mind to the author by now.
patch_level_1	A triangulation of patch level 1 consists of patches, i.e. of cells that are refined once. This flag ensures that a mesh of patch level 1 is still of patch level 1 after coarsening and refinement. It is, however, the user's responsibility to ensure that the mesh is of patch level 1 before calling Triangulation::execute_coarsening_and_refinement() the first time. The easiest way to achieve this is by calling global_refine(1) straight after creation of the triangulation. It follows that if at least one of the children of a cell is or will be refined than all children need to be refined. If the patch_level_1 flag is set, than the flags eliminate_unrefined_islands, eliminate_refined_inner_islands and eliminate_refined_boundary_islands will be ignored as they will be fulfilled automatically.
coarsest_level_1	Each coarse grid cell is refined at least once, i.e., the triangulation might have active cells on level 1 but not on level 0. This flag ensures that a mesh which has coarsest_level_1 has still coarsest_level_1 after coarsening and refinement. It is, however, the user's responsibility to ensure that the mesh has coarsest_level_1 before calling execute_coarsening_and_refinement the first time. The easiest way to achieve this is by calling global_refine(1) straight after creation of the triangulation. It follows that active cells on level 1 may not be coarsened. The main use of this flag is to ensure that each cell has at least one neighbor in each coordinate direction (i.e. each cell has at least a left or right, and at least an upper or lower neighbor in 2d). This is a necessary precondition for some algorithms that compute finite differences between cells. The DerivativeApproximation class is one of these algorithms that require that a triangulation is coarsest_level_1 unless all cells already have at least one neighbor in each coordinate direction on the coarsest level.
allow_anisotropic_smoothing	This flag is not included in `maximum_smoothing`. The flag is concerned with the following case: consider the case that an unrefined and a refined cell share a common face and that one of the children of the refined cell along the common face is flagged for further refinement. In that case, the resulting mesh would have more than one hanging node along one or more of the edges of the triangulation, a situation that is not allowed. Consequently, in order to perform the refinement, the coarser of the two original cells is also going to be refined. However, in many cases it is sufficient to refine the coarser of the two original cells in an anisotropic way to avoid the case of multiple hanging vertices on a single edge. Doing only the minimal anisotropic refinement can save cells and degrees of freedom. By specifying this flag, the library can produce these anisotropic refinements. The flag is not included by default since it may lead to anisotropically refined meshes even though no cell has ever been refined anisotropically explicitly by a user command. This surprising fact may lead to programs that do the wrong thing since they are not written for the additional cases that can happen with anisotropic meshes, see the discussion in the introduction to step-30.
eliminate_refined_inner_islands	This algorithm seeks for isolated cells which are refined or flagged for refinement. This definition is unlike that for eliminate_unrefined_islands, which would mean that an island is defined as a cell which is refined but more of its neighbors are not refined than are refined. For example, in 2D, a cell's refinement would be reverted if at most one of its neighbors is also refined (or refined but flagged for coarsening). The reason for the change in definition of an island is, that this option would be a bit dangerous, since if you consider a chain of refined cells (e.g. along a kink in the solution), the cells at the two ends would be coarsened, after which the next outermost cells would need to be coarsened. Therefore, only one loop of flagging cells like this could be done to avoid eating up the whole chain of refined cells (‘chain reaction’...). This algorithm also takes into account cells which are not actually refined but are flagged for refinement. If necessary, it takes away the refinement flag. Actually there are two versions of this flag, eliminate_refined_inner_islands and eliminate_refined_boundary_islands. There first eliminates islands defined by the definition above which are in the interior of the domain, while the second eliminates only those islands if the cell is at the boundary. The reason for this split of flags is that one often wants to eliminate such islands in the interior while those at the boundary may well be wanted, for example if one refines the mesh according to a criterion associated with a boundary integral or if one has rough boundary data.
eliminate_refined_boundary_islands	The result of this flag is very similar to eliminate_refined_inner_islands. See the documentation there.
do_not_produce_unrefined_islands	This flag prevents the occurrence of unrefined islands. In more detail: It prohibits the coarsening of a cell if 'most of the neighbors' will be refined after the step.
smoothing_on_refinement	This flag sums up all smoothing algorithms which may be performed upon refinement by flagging some more cells for refinement.
smoothing_on_coarsening	This flag sums up all smoothing algorithms which may be performed upon coarsening by flagging some more cells for coarsening.
maximum_smoothing	This flag includes all the above ones (therefore combines all smoothing algorithms implemented), with the exception of anisotropic smoothing.

Definition at line 1124 of file tria.h.

◆ CellStatus

template<int dim, int spacedim = dim>

enum Triangulation::CellStatus

Used to inform functions in derived classes how the cell with the given cell_iterator is going to change. Note that this may me different than the refine_flag() and coarsen_flag() in the cell_iterator in parallel calculations because of refinement constraints that this machine does not see.

Enumerator
CELL_PERSIST	The cell will not be refined or coarsened and might or might not move to a different processor.
CELL_REFINE	The cell will be or was refined.
CELL_COARSEN	The children of this cell will be or were coarsened into this cell.
CELL_INVALID	Invalid status. Will not occur for the user.

Definition at line 1969 of file tria.h.

Constructor & Destructor Documentation

◆ Triangulation() [1/3]

template<int dim, int spacedim>

Triangulation< dim, spacedim >::Triangulation	(	const MeshSmoothing	smooth_grid = `none`,
		const bool	check_for_distorted_cells = `false`
	)

Create an empty triangulation. Do not create any cells.

Parameters

smooth_grid	Determines the level of smoothness of the mesh size function that should be enforced upon mesh refinement.
check_for_distorted_cells	Determines whether the triangulation should check whether any of the cells that are created by create_triangulation() or execute_coarsening_and_refinement() are distorted (see distorted cells). If set, these two functions may throw an exception if they encounter distorted cells.

Definition at line 10106 of file tria.cc.

◆ Triangulation() [2/3]

template<int dim, int spacedim = dim>

Triangulation< dim, spacedim >::Triangulation ( const Triangulation< dim, spacedim > & )

delete

Copy constructor.

You should really use the copy_triangulation function, so this constructor is deleted. The reason for this is that we may want to use triangulation objects in collections. However, C++ containers require that the objects stored in them are copyable, so we need to provide a copy constructor. On the other hand, copying triangulations is so expensive that we do not want such objects copied by accident, for example in compiler-generated temporary objects. By defining a copy constructor but throwing an error, we satisfy the formal requirements of containers, but at the same time disallow actual copies. Finally, through the exception, one easily finds the places where code has to be changed to avoid copies.

◆ Triangulation() [3/3]

template<int dim, int spacedim>

Triangulation< dim, spacedim >::Triangulation ( Triangulation< dim, spacedim > && tria )

noexcept

Move constructor.

Create a new triangulation by stealing the internal data of another triangulation.

Definition at line 10131 of file tria.cc.

◆ ~Triangulation()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::~Triangulation

overridevirtual

Delete the object and all levels of the hierarchy.

Reimplemented in parallel::fullydistributed::Triangulation< dim, spacedim >, parallel::shared::Triangulation< dim, spacedim >, parallel::distributed::Triangulation< 1, spacedim >, parallel::distributed::Triangulation< dim, spacedim >, parallel::distributed::Triangulation< dim, dim >, and parallel::distributed::Triangulation< dim >.

Definition at line 10180 of file tria.cc.

Member Function Documentation

◆ operator=()

template<int dim, int spacedim>

Triangulation< dim, spacedim > & Triangulation< dim, spacedim >::operator= ( Triangulation< dim, spacedim > && tria )

noexcept

Move assignment operator.

Definition at line 10155 of file tria.cc.

◆ clear()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::clear

virtual

Reset this triangulation into a virgin state by deleting all data.

Note that this operation is only allowed if no subscriptions to this object exist any more, such as DoFHandler objects using it.

Reimplemented in parallel::distributed::Triangulation< dim, spacedim >, parallel::distributed::Triangulation< dim, dim >, and parallel::distributed::Triangulation< dim >.

Definition at line 10209 of file tria.cc.

◆ set_mesh_smoothing()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::set_mesh_smoothing ( const MeshSmoothing mesh_smoothing )

virtual

Set the mesh smoothing to mesh_smoothing. This overrides the MeshSmoothing given to the constructor. It is allowed to call this function only if the triangulation is empty.

Definition at line 10224 of file tria.cc.

◆ get_mesh_smoothing()

template<int dim, int spacedim>

const Triangulation< dim, spacedim >::MeshSmoothing & Triangulation< dim, spacedim >::get_mesh_smoothing

virtual

Return the mesh smoothing requirements that are obeyed.

Definition at line 10236 of file tria.cc.

◆ get_boundary_ids()

template<int dim, int spacedim>

std::vector< types::boundary_id > Triangulation< dim, spacedim >::get_boundary_ids

virtual

Return a vector containing all boundary indicators assigned to boundary faces of active cells of this Triangulation object. Note, that each boundary indicator is reported only once. The size of the return vector will represent the number of different indicators (which is greater or equal one).

See also: Glossary entry on boundary indicators

Definition at line 10384 of file tria.cc.

◆ copy_triangulation()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::copy_triangulation ( const Triangulation< dim, spacedim > & other_tria )

virtual

Copy other_tria to this triangulation. This operation is not cheap, so you should be careful with using this. We do not implement this function as a copy constructor, since it makes it easier to maintain collections of triangulations if you can assign them values later on.

Keep in mind that this function also copies the pointer to the boundary descriptor previously set by the set_manifold function. You must therefore also guarantee that the Manifold objects describing the boundary have a lifetime at least as long as the copied triangulation.

This triangulation must be empty beforehand.

The function is made virtual since some derived classes might want to disable or extend the functionality of this function.

Note: Calling this function triggers the 'copy' signal on other_tria, i.e. the triangulation being copied from. It also triggers the 'create' signal of the current triangulation. See the section on signals in the general documentation for more information.; The list of connections to signals is not copied from the old to the new triangulation since these connections were established to monitor how the old triangulation changes, not how any triangulation it may be copied to changes.

Reimplemented in PersistentTriangulation< dim, spacedim >.

Definition at line 10438 of file tria.cc.

◆ create_triangulation() [1/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::create_triangulation	(	const std::vector< Point< spacedim >> &	vertices,
		const std::vector< CellData< dim >> &	cells,
		const SubCellData &	subcelldata
	)

virtual

Create a triangulation from a list of vertices and a list of cells, each of the latter being a list of 1<<dim vertex indices. The triangulation must be empty upon calling this function and the cell list should be useful (connected domain, etc.). The result of calling this function is a coarse mesh.

Material data for the cells is given within the cells array, while boundary information is given in the subcelldata field.

The numbering of vertices within the cells array is subject to some constraints; see the general class documentation for this.

For conditions when this function can generate a valid triangulation, see the documentation of this class, and the GridIn and GridReordering class.

If the check_for_distorted_cells flag was specified upon creation of this object, at the very end of its operation, the current function walks over all cells and verifies that none of the cells is deformed (see the entry on distorted cells in the glossary), where we call a cell deformed if the determinant of the Jacobian of the mapping from reference cell to real cell is negative at least at one of the vertices (this computation is done using the GeometryInfo::jacobian_determinants_at_vertices function). If there are deformed cells, this function throws an exception of kind DistortedCellList. Since this happens after all data structures have been set up, you can catch and ignore this exception if you know what you do – for example, it may be that the determinant is zero (indicating that you have collapsed edges in a cell) but that this is ok because you didn't intend to integrate on this cell anyway. On the other hand, deformed cells are often a sign of a mesh that is too coarse to resolve the geometry of the domain, and in this case ignoring the exception is probably unwise.

Note: This function is used in step-14 .; This function triggers the create signal after doing its work. See the section on signals in the general documentation of this class.; The check for distorted cells is only done if dim==spacedim, as otherwise cells can legitimately be twisted if the manifold they describe is twisted.

Reimplemented in parallel::distributed::Triangulation< dim, spacedim >, parallel::distributed::Triangulation< dim, dim >, parallel::shared::Triangulation< dim, spacedim >, and PersistentTriangulation< dim, spacedim >.

Definition at line 10521 of file tria.cc.

◆ create_triangulation() [2/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::create_triangulation ( const TriangulationDescription::Description< dim, spacedim > & construction_data )

virtual

Create a triangulation from the provided TriangulationDescription::Description.

Note: The namespace TriangulationDescription::Utilities contains functions to create TriangulationDescription::Description.

Parameters

construction_data The data needed for this process.

Reimplemented in parallel::distributed::Triangulation< dim, spacedim >, parallel::distributed::Triangulation< dim, dim >, parallel::shared::Triangulation< dim, spacedim >, PersistentTriangulation< dim, spacedim >, and parallel::fullydistributed::Triangulation< dim, spacedim >.

Definition at line 10703 of file tria.cc.

◆ create_triangulation_compatibility()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::create_triangulation_compatibility	(	const std::vector< Point< spacedim >> &	vertices,
		const std::vector< CellData< dim >> &	cells,
		const SubCellData &	subcelldata
	)

virtual

For backward compatibility, only. This function takes the cell data in the ordering as requested by deal.II versions up to 5.2, converts it to the new (lexicographic) ordering and calls create_triangulation().

Note: This function internally calls create_triangulation and therefore can throw the same exception as the other function.

Reimplemented in PersistentTriangulation< dim, spacedim >.

Definition at line 10501 of file tria.cc.

◆ flip_all_direction_flags()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::flip_all_direction_flags

Revert or flip the direction_flags of a dim<spacedim triangulation, see GlossDirectionFlag.

This function throws an exception if dim equals spacedim.

Definition at line 10822 of file tria.cc.

◆ set_all_refine_flags()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::set_all_refine_flags

Flag all active cells for refinement. This will refine all cells of all levels which are not already refined (i.e. only cells are refined which do not yet have children). The cells are only flagged, not refined, thus you have the chance to save the refinement flags.

Definition at line 10834 of file tria.cc.

◆ refine_global()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::refine_global ( const unsigned int times = 1 )

Refine all cells times times, by alternatingly calling set_all_refine_flags and execute_coarsening_and_refinement.

The latter function may throw an exception if it creates cells that are distorted (see its documentation for an explanation). This exception will be propagated through this function if that happens, and you may not get the actual number of refinement steps in that case.

Note: This function triggers the pre- and post-refinement signals before and after doing each individual refinement cycle (i.e. more than once if times > 1) . See the section on signals in the general documentation of this class.

Definition at line 10851 of file tria.cc.

◆ execute_coarsening_and_refinement()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::execute_coarsening_and_refinement

virtual

Execute both refinement and coarsening of the triangulation.

The function resets all refinement and coarsening flags to false. It uses the user flags for internal purposes. They will therefore be overwritten by undefined content.

To allow user programs to fix up these cells if that is desired, this function after completing all other work may throw an exception of type DistortedCellList that contains a list of those cells that have been refined and have at least one child that is distorted. The function does not create such an exception if no cells have created distorted children. Note that for the check for distorted cells to happen, the check_for_distorted_cells flag has to be specified upon creation of a triangulation object.

See the general docs for more information.

Note: This function triggers the pre- and post-refinement signals before and after doing its work. See the section on signals in the general documentation of this class.; If the boundary description is sufficiently irregular, it can happen that some of the children produced by mesh refinement are distorted (see the extensive discussion on distorted cells).; This function is virtual to allow derived classes to insert hooks, such as saving refinement flags and the like (see e.g. the PersistentTriangulation class).

Reimplemented in parallel::distributed::Triangulation< dim, spacedim >, parallel::distributed::Triangulation< dim, dim >, parallel::distributed::Triangulation< dim >, parallel::shared::Triangulation< dim, spacedim >, parallel::fullydistributed::Triangulation< dim, spacedim >, and PersistentTriangulation< dim, spacedim >.

Definition at line 13385 of file tria.cc.

◆ prepare_coarsening_and_refinement() [1/4]

template<int dim, int spacedim>

bool Triangulation< dim, spacedim >::prepare_coarsening_and_refinement

virtual

Do both preparation for refinement and coarsening as well as mesh smoothing.

Regarding the refinement process it fixes the closure of the refinement in dim>=2 (make sure that no two cells are adjacent with a refinement level differing with more than one), etc. It performs some mesh smoothing if the according flag was given to the constructor of this class. The function returns whether additional cells have been flagged for refinement.

See the general doc of this class for more information on smoothing upon refinement.

Regarding the coarsening part, flagging and deflagging cells in preparation of the actual coarsening step are done. This includes deleting coarsen flags from cells which may not be deleted (e.g. because one neighbor is more refined than the cell), doing some smoothing, etc.

The effect is that only those cells are flagged for coarsening which will actually be coarsened. This includes the fact that all flagged cells belong to parent cells of which all children are flagged.

The function returns whether some cells' flagging has been changed in the process.

This function uses the user flags, so store them if you still need them afterwards.

Reimplemented in parallel::distributed::Triangulation< dim, spacedim >, parallel::distributed::Triangulation< dim, dim >, parallel::distributed::Triangulation< dim >, and parallel::fullydistributed::Triangulation< dim, spacedim >.

Definition at line 14083 of file tria.cc.

◆ save_refine_flags() [1/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_refine_flags ( std::ostream & out ) const

Save the addresses of the cells which are flagged for refinement to out. For usage, read the general documentation for this class.

Definition at line 10885 of file tria.cc.

◆ save_refine_flags() [2/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_refine_flags ( std::vector< bool > & v ) const

Same as above, but store the flags to a bitvector rather than to a file.

Definition at line 10868 of file tria.cc.

◆ load_refine_flags() [1/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_refine_flags ( std::istream & in )

Read the information stored by save_refine_flags.

Definition at line 10899 of file tria.cc.

◆ load_refine_flags() [2/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_refine_flags ( const std::vector< bool > & v )

Read the information stored by save_refine_flags.

Definition at line 10910 of file tria.cc.

◆ save_coarsen_flags() [1/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_coarsen_flags ( std::ostream & out ) const

Analogue to save_refine_flags.

Definition at line 10953 of file tria.cc.

◆ save_coarsen_flags() [2/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_coarsen_flags ( std::vector< bool > & v ) const

Same as above, but store the flags to a bitvector rather than to a file.

Definition at line 10938 of file tria.cc.

◆ load_coarsen_flags() [1/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_coarsen_flags ( std::istream & out )

Analogue to load_refine_flags.

Definition at line 10967 of file tria.cc.

◆ load_coarsen_flags() [2/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_coarsen_flags ( const std::vector< bool > & v )

Analogue to load_refine_flags.

Definition at line 10981 of file tria.cc.

◆ get_anisotropic_refinement_flag()

template<int dim, int spacedim>

bool Triangulation< dim, spacedim >::get_anisotropic_refinement_flag

Return whether this triangulation has ever undergone anisotropic (as opposed to only isotropic) refinement.

Definition at line 10999 of file tria.cc.

◆ clear_user_flags()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::clear_user_flags

Clear all user flags. See also GlossUserFlags.

Definition at line 11174 of file tria.cc.

◆ save_user_flags() [1/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_flags ( std::ostream & out ) const

Save all user flags. See the general documentation for this class and the documentation for the save_refine_flags for more details. See also GlossUserFlags.

Definition at line 11185 of file tria.cc.

◆ save_user_flags() [2/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_flags ( std::vector< bool > & v ) const

Same as above, but store the flags to a bitvector rather than to a file. The output vector is resized if necessary. See also GlossUserFlags.

Definition at line 11203 of file tria.cc.

◆ load_user_flags() [1/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_flags ( std::istream & in )

Read the information stored by save_user_flags. See also GlossUserFlags.

Definition at line 11234 of file tria.cc.

◆ load_user_flags() [2/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_flags ( const std::vector< bool > & v )

Read the information stored by save_user_flags. See also GlossUserFlags.

Definition at line 11252 of file tria.cc.

◆ clear_user_flags_line()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::clear_user_flags_line

Clear all user flags on lines. See also GlossUserFlags.

Definition at line 11084 of file tria.cc.

◆ save_user_flags_line() [1/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_flags_line ( std::ostream & out ) const

Save the user flags on lines. See also GlossUserFlags.

Definition at line 11304 of file tria.cc.

◆ save_user_flags_line() [2/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_flags_line ( std::vector< bool > & v ) const

Same as above, but store the flags to a bitvector rather than to a file. The output vector is resized if necessary. See also GlossUserFlags.

Definition at line 11289 of file tria.cc.

◆ load_user_flags_line() [1/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_flags_line ( std::istream & in )

Load the user flags located on lines. See also GlossUserFlags.

Definition at line 11318 of file tria.cc.

◆ load_user_flags_line() [2/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_flags_line ( const std::vector< bool > & v )

Load the user flags located on lines. See also GlossUserFlags.

Definition at line 11332 of file tria.cc.

◆ clear_user_flags_quad()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::clear_user_flags_quad

Clear all user flags on quads. See also GlossUserFlags.

Definition at line 11125 of file tria.cc.

◆ save_user_flags_quad() [1/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_flags_quad ( std::ostream & out ) const

Save the user flags on quads. See also GlossUserFlags.

Definition at line 11427 of file tria.cc.

◆ save_user_flags_quad() [2/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_flags_quad ( std::vector< bool > & v ) const

Same as above, but store the flags to a bitvector rather than to a file. The output vector is resized if necessary. See also GlossUserFlags.

Definition at line 11408 of file tria.cc.

◆ load_user_flags_quad() [1/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_flags_quad ( std::istream & in )

Load the user flags located on quads. See also GlossUserFlags.

Definition at line 11441 of file tria.cc.

◆ load_user_flags_quad() [2/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_flags_quad ( const std::vector< bool > & v )

Load the user flags located on quads. See also GlossUserFlags.

Definition at line 11455 of file tria.cc.

◆ clear_user_flags_hex()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::clear_user_flags_hex

Clear all user flags on quads. See also GlossUserFlags.

Definition at line 11165 of file tria.cc.

◆ save_user_flags_hex() [1/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_flags_hex ( std::ostream & out ) const

Save the user flags on hexs. See also GlossUserFlags.

Definition at line 11496 of file tria.cc.

◆ save_user_flags_hex() [2/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_flags_hex ( std::vector< bool > & v ) const

Same as above, but store the flags to a bitvector rather than to a file. The output vector is resized if necessary. See also GlossUserFlags.

Definition at line 11477 of file tria.cc.

◆ load_user_flags_hex() [1/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_flags_hex ( std::istream & in )

Load the user flags located on hexs. See also GlossUserFlags.

Definition at line 11510 of file tria.cc.

◆ load_user_flags_hex() [2/2]

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_flags_hex ( const std::vector< bool > & v )

Load the user flags located on hexs. See also GlossUserFlags.

Definition at line 11524 of file tria.cc.

◆ clear_user_data()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::clear_user_data

Clear all user pointers and indices and allow the use of both for next access. See also GlossUserData.

Definition at line 11049 of file tria.cc.

◆ save_user_indices()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_indices ( std::vector< unsigned int > & v ) const

Save all user indices. The output vector is resized if necessary. See also GlossUserData.

Definition at line 11546 of file tria.cc.

◆ load_user_indices()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_indices ( const std::vector< unsigned int > & v )

Read the information stored by save_user_indices(). See also GlossUserData.

Definition at line 11578 of file tria.cc.

◆ save_user_pointers()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_pointers ( std::vector< void * > & v ) const

Save all user pointers. The output vector is resized if necessary. See also GlossUserData.

Definition at line 11802 of file tria.cc.

◆ load_user_pointers()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_pointers ( const std::vector< void * > & v )

Read the information stored by save_user_pointers(). See also GlossUserData.

Definition at line 11833 of file tria.cc.

◆ save_user_indices_line()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_indices_line ( std::vector< unsigned int > & v ) const

Save the user indices on lines. The output vector is resized if necessary. See also GlossUserData.

Definition at line 11658 of file tria.cc.

◆ load_user_indices_line()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_indices_line ( const std::vector< unsigned int > & v )

Load the user indices located on lines. See also GlossUserData.

Definition at line 11672 of file tria.cc.

◆ save_user_indices_quad()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_indices_quad ( std::vector< unsigned int > & v ) const

Save the user indices on quads. The output vector is resized if necessary. See also GlossUserData.

Definition at line 11686 of file tria.cc.

◆ load_user_indices_quad()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_indices_quad ( const std::vector< unsigned int > & v )

Load the user indices located on quads. See also GlossUserData.

Definition at line 11704 of file tria.cc.

◆ save_user_indices_hex()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_indices_hex ( std::vector< unsigned int > & v ) const

Save the user indices on hexes. The output vector is resized if necessary. See also GlossUserData.

Definition at line 11721 of file tria.cc.

◆ load_user_indices_hex()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_indices_hex ( const std::vector< unsigned int > & v )

Load the user indices located on hexs. See also GlossUserData.

Definition at line 11739 of file tria.cc.

◆ save_user_pointers_line()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_pointers_line ( std::vector< void * > & v ) const

Save the user indices on lines. The output vector is resized if necessary. See also GlossUserData.

Definition at line 11870 of file tria.cc.

◆ load_user_pointers_line()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_pointers_line ( const std::vector< void * > & v )

Load the user pointers located on lines. See also GlossUserData.

Definition at line 11884 of file tria.cc.

◆ save_user_pointers_quad()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_pointers_quad ( std::vector< void * > & v ) const

Save the user pointers on quads. The output vector is resized if necessary. See also GlossUserData.

Definition at line 11899 of file tria.cc.

◆ load_user_pointers_quad()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_pointers_quad ( const std::vector< void * > & v )

Load the user pointers located on quads. See also GlossUserData.

Definition at line 11917 of file tria.cc.

◆ save_user_pointers_hex()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::save_user_pointers_hex ( std::vector< void * > & v ) const

Save the user pointers on hexes. The output vector is resized if necessary. See also GlossUserData.

Definition at line 11934 of file tria.cc.

◆ load_user_pointers_hex()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::load_user_pointers_hex ( const std::vector< void * > & v )

Load the user pointers located on hexs. See also GlossUserData.

Definition at line 11952 of file tria.cc.

◆ begin()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::cell_iterator Triangulation< dim, spacedim >::begin ( const unsigned int level = 0 ) const

Iterator to the first used cell on level level.

Note: The given level argument needs to correspond to a level of the triangulation, i.e., should be less than the value returned by n_levels(). On the other hand, for parallel computations using a parallel::distributed::Triangulation object, it is often convenient to write loops over the cells of all levels of the global mesh, even if the local portion of the triangulation does not actually have cells at one of the higher levels. In those cases, the level argument is accepted if it is less than what the n_global_levels() function returns. If the given level is between the values returned by n_levels() and n_global_levels(), then no cells exist in the local portion of the triangulation at this level, and the function simply returns what end() would return.

Definition at line 11993 of file tria.cc.

◆ begin_active()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::active_cell_iterator Triangulation< dim, spacedim >::begin_active ( const unsigned int level = 0 ) const

Iterator to the first active cell on level level. If the given level does not contain any active cells (i.e., all cells on this level are further refined, then this function returns end_active(level) so that loops of the kind

for (const auto cell=tria.begin_active(level);
     cell!=tria.end_active(level);
     ++cell)
  {
    ...
  }

have zero iterations, as may be expected if there are no active cells on this level.

Note: The given level argument needs to correspond to a level of the triangulation, i.e., should be less than the value returned by n_levels(). On the other hand, for parallel computations using a parallel::distributed::Triangulation object, it is often convenient to write loops over the cells of all levels of the global mesh, even if the local portion of the triangulation does not actually have cells at one of the higher levels. In those cases, the level argument is accepted if it is less than what the n_global_levels() function returns. If the given level is between the values returned by n_levels() and n_global_levels(), then no cells exist in the local portion of the triangulation at this level, and the function simply returns what end() would return.

Definition at line 12013 of file tria.cc.

◆ end() [1/2]

template<int dim, int spacedim>

Triangulation< dim, spacedim >::cell_iterator Triangulation< dim, spacedim >::end

Iterator past the end; this iterator serves for comparisons of iterators with past-the-end or before-the-beginning states.

Definition at line 12079 of file tria.cc.

◆ end() [2/2]

template<int dim, int spacedim>

Triangulation< dim, spacedim >::cell_iterator Triangulation< dim, spacedim >::end ( const unsigned int level ) const

Return an iterator which is the first iterator not on level. If level is the last level, then this returns end().

Note: The given level argument needs to correspond to a level of the triangulation, i.e., should be less than the value returned by n_levels(). On the other hand, for parallel computations using a parallel::distributed::Triangulation object, it is often convenient to write loops over the cells of all levels of the global mesh, even if the local portion of the triangulation does not actually have cells at one of the higher levels. In those cases, the level argument is accepted if it is less than what the n_global_levels() function returns. If the given level is between the values returned by n_levels() and n_global_levels(), then no cells exist in the local portion of the triangulation at this level, and the function simply returns what end() would return.

Definition at line 12119 of file tria.cc.

◆ end_active()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::active_cell_iterator Triangulation< dim, spacedim >::end_active ( const unsigned int level ) const

Return an active iterator which is the first active iterator not on the given level. If level is the last level, then this returns end().

Note: The given level argument needs to correspond to a level of the triangulation, i.e., should be less than the value returned by n_levels(). On the other hand, for parallel computations using a parallel::distributed::Triangulation object, it is often convenient to write loops over the cells of all levels of the global mesh, even if the local portion of the triangulation does not actually have cells at one of the higher levels. In those cases, the level argument is accepted if it is less than what the n_global_levels() function returns. If the given level is between the values returned by n_levels() and n_global_levels(), then no cells exist in the local portion of the triangulation at this level, and the function simply returns what end() would return.

Definition at line 12148 of file tria.cc.

◆ last()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::cell_iterator Triangulation< dim, spacedim >::last

Return an iterator pointing to the last used cell.

Definition at line 12033 of file tria.cc.

◆ last_active()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::active_cell_iterator Triangulation< dim, spacedim >::last_active

Return an iterator pointing to the last active cell.

Definition at line 12058 of file tria.cc.

◆ begin_face()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::face_iterator Triangulation< dim, spacedim >::begin_face

Iterator to the first used face.

Definition at line 12221 of file tria.cc.

◆ begin_active_face()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::active_face_iterator Triangulation< dim, spacedim >::begin_active_face

Iterator to the first active face.

Definition at line 12242 of file tria.cc.

◆ end_face()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::face_iterator Triangulation< dim, spacedim >::end_face

Iterator past the end; this iterator serves for comparisons of iterators with past-the-end or before-the-beginning states.

Definition at line 12263 of file tria.cc.

◆ begin_vertex()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::vertex_iterator Triangulation< dim, spacedim >::begin_vertex

Iterator to the first used vertex. This function can only be used if dim is not one.

Definition at line 12296 of file tria.cc.

◆ begin_active_vertex()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::active_vertex_iterator Triangulation< dim, spacedim >::begin_active_vertex

Iterator to the first active vertex. Because all vertices are active, begin_vertex() and begin_active_vertex() return the same vertex. This function can only be used if dim is not one.

Definition at line 12313 of file tria.cc.

◆ end_vertex()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::vertex_iterator Triangulation< dim, spacedim >::end_vertex

Iterator past the end; this iterator serves for comparisons of iterators with past-the-end or before-the-beginning states. This function can only be used if dim is not one.

Definition at line 12323 of file tria.cc.

◆ n_lines() [1/2]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_lines

In the following, most functions are provided in two versions, with and without an argument describing the level. The versions with this argument are only applicable for objects describing the cells of the present triangulation. For example: in 2D n_lines(level) cannot be called, only n_lines(), as lines are faces in 2D and therefore have no level. Return the total number of used lines, active or not.

Definition at line 12819 of file tria.cc.

◆ n_lines() [2/2]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_lines ( const unsigned int level ) const

Return the total number of used lines, active or not on level level.

Definition at line 12900 of file tria.cc.

◆ n_active_lines() [1/2]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_active_lines

Return the total number of active lines.

Definition at line 12910 of file tria.cc.

◆ n_active_lines() [2/2]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_active_lines ( const unsigned int level ) const

Return the total number of active lines, on level level.

Definition at line 12918 of file tria.cc.

◆ n_quads() [1/8]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_quads

Return the total number of used quads, active or not.

Definition at line 13075 of file tria.cc.

◆ n_quads() [2/8]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_quads ( const unsigned int level ) const

Return the total number of used quads, active or not on level level.

Definition at line 13083 of file tria.cc.

◆ n_active_quads() [1/8]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_active_quads

Return the total number of active quads, active or not.

Definition at line 13142 of file tria.cc.

◆ n_active_quads() [2/8]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_active_quads ( const unsigned int level ) const

Return the total number of active quads, active or not on level level.

Definition at line 13150 of file tria.cc.

◆ n_hexs() [1/4]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_hexs

Return the total number of used hexahedra, active or not.

Definition at line 13161 of file tria.cc.

◆ n_hexs() [2/4]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_hexs ( const unsigned int level ) const

Return the total number of used hexahedra, active or not on level level.

Definition at line 13170 of file tria.cc.

◆ n_active_hexs() [1/4]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_active_hexs

Return the total number of active hexahedra, active or not.

Definition at line 13187 of file tria.cc.

◆ n_active_hexs() [2/4]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_active_hexs ( const unsigned int level ) const

Return the total number of active hexahedra, active or not on level level.

Definition at line 13196 of file tria.cc.

◆ n_cells() [1/2]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_cells

Return the total number of used cells, active or not. Maps to n_lines() in one space dimension and so on.

Definition at line 12667 of file tria.cc.

◆ n_cells() [2/2]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_cells ( const unsigned int level ) const

Return the total number of used cells, active or not, on level level. Maps to n_lines(level) in one space dimension and so on.

Definition at line 12768 of file tria.cc.

◆ n_active_cells() [1/2]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_active_cells

Return the total number of active cells. Maps to n_active_lines() in one space dimension and so on.

Definition at line 12675 of file tria.cc.

◆ n_global_active_cells()

template<int dim, int spacedim>

types::global_cell_index Triangulation< dim, spacedim >::n_global_active_cells

virtual

Return the total number of active cells. For the current class, this is the same as n_active_cells(). However, the function may be overloaded in derived classes (e.g., in parallel::distributed::Triangulation) where it may return a value greater than the number of active cells reported by the triangulation object on the current processor.

Definition at line 12682 of file tria.cc.

◆ n_active_cells() [2/2]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_active_cells ( const unsigned int level ) const

Return the total number of active cells on level level. Maps to n_active_lines(level) in one space dimension and so on.

Definition at line 12788 of file tria.cc.

◆ n_faces()

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_faces

Return the total number of used faces, active or not. In 2D, the result equals n_lines(), in 3D it equals n_quads(), while in 1D it equals the number of used vertices.

Definition at line 12691 of file tria.cc.

◆ n_active_faces()

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_active_faces

Return the total number of active faces. In 2D, the result equals n_active_lines(), in 3D it equals n_active_quads(), while in 1D it equals the number of used vertices.

Definition at line 12729 of file tria.cc.

◆ n_levels()

template<int dim, int spacedim = dim>

unsigned int Triangulation< dim, spacedim >::n_levels ( ) const

Return the number of levels in this triangulation.

Note: Internally, triangulations store data in levels, and there may be more levels in this data structure than one may think – for example, imagine a triangulation that we just got by coarsening the highest level so that it was completely depopulated. That level is not removed, since it will most likely be repopulated soon by the next refinement process. As a consequence, if you happened to run through raw cell iterators (which you can't do as a user of this class, but can internally), then the number of objects in the levels hierarchy is larger than the level of the most refined cell plus one. On the other hand, since this is rarely what a user of this class cares about, the function really just returns the level of the most refined active cell plus one. (The plus one is because in a coarse, unrefined mesh, all cells have level zero – making the number of levels equal to one.)

◆ n_global_levels()

template<int dim, int spacedim = dim>

virtual unsigned int Triangulation< dim, spacedim >::n_global_levels ( ) const

virtual

Return the number of levels in use. This function is equivalent to n_levels() for a serial Triangulation, but gives the maximum of n_levels() over all processors for a parallel::distributed::Triangulation and therefore can be larger than n_levels().

◆ has_hanging_nodes()

template<int dim, int spacedim>

bool Triangulation< dim, spacedim >::has_hanging_nodes

virtual

Return true if the triangulation has hanging nodes.

The function is made virtual since the result can be interpreted in different ways, depending on whether the triangulation lives only on a single processor, or may be distributed as done in the parallel::distributed::Triangulation class (see there for a description of what the function is supposed to do in the parallel context).

Reimplemented in parallel::distributed::Triangulation< dim >.

Definition at line 12807 of file tria.cc.

◆ n_vertices()

template<int dim, int spacedim = dim>

unsigned int Triangulation< dim, spacedim >::n_vertices ( ) const

Return the total number of vertices. Some of them may not be used, which usually happens upon coarsening of a triangulation when some vertices are discarded, but we do not want to renumber the remaining ones, leading to holes in the numbers of used vertices. You can get the number of used vertices using n_used_vertices function.

◆ get_vertices()

template<int dim, int spacedim = dim>

const std::vector<Point<spacedim> >& Triangulation< dim, spacedim >::get_vertices ( ) const

Return a constant reference to all the vertices present in this triangulation. Note that not necessarily all vertices in this array are actually used; for example, if you coarsen a mesh, then some vertices are deleted, but their positions in this array are unchanged as the indices of vertices are only allocated once. You can find out about which vertices are actually used by the function get_used_vertices().

◆ n_used_vertices()

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_used_vertices

Return the number of vertices that are presently in use, i.e. belong to at least one used element.

Definition at line 13253 of file tria.cc.

◆ vertex_used()

template<int dim, int spacedim = dim>

bool Triangulation< dim, spacedim >::vertex_used ( const unsigned int index ) const

Return true if the vertex with this index is used.

◆ get_used_vertices()

template<int dim, int spacedim>

const std::vector< bool > & Triangulation< dim, spacedim >::get_used_vertices

Return a constant reference to the array of bools indicating whether an entry in the vertex array is used or not.

Definition at line 13262 of file tria.cc.

◆ max_adjacent_cells() [1/4]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::max_adjacent_cells

Return the maximum number of cells meeting at a common vertex. Since this number is an invariant under refinement, only the cells on the coarsest level are considered. The operation is thus reasonably fast. The invariance is only true for sufficiently many cells in the coarsest triangulation (e.g. for a single cell one would be returned), so a minimum of four is returned in two dimensions, 8 in three dimensions, etc, which is how many cells meet if the triangulation is refined.

In one space dimension, two is returned.

Definition at line 13296 of file tria.cc.

◆ locally_owned_subdomain()

template<int dim, int spacedim>

types::subdomain_id Triangulation< dim, spacedim >::locally_owned_subdomain

virtual

This function always returns invalid_subdomain_id but is there for compatibility with the derived parallel::distributed::Triangulation class. For distributed parallel triangulations this function returns the subdomain id of those cells that are owned by the current processor.

Definition at line 13329 of file tria.cc.

◆ get_triangulation() [1/2]

template<int dim, int spacedim>

const Triangulation< dim, spacedim > & Triangulation< dim, spacedim >::get_triangulation

Return a reference to the current object.

This doesn't seem to be very useful but allows to write code that can access the underlying triangulation for anything that satisfies the MeshType concept (which may not only be a triangulation, but also a DoFHandler, for example).

Definition at line 13338 of file tria.cc.

◆ get_triangulation() [2/2]

template<int dim, int spacedim = dim>

const Triangulation<dim, spacedim>& Triangulation< dim, spacedim >::get_triangulation ( ) const

Return a reference to the current object. This is the const-version of the previous function.

◆ n_raw_lines() [1/8]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_raw_lines

Total number of lines, used or unused.

Note: This function really exports internal information about the triangulation. It shouldn't be used in applications. The function is only part of the public interface of this class because it is used in some of the other classes that build very closely on it (in particular, the DoFHandler class).

Definition at line 12892 of file tria.cc.

◆ n_raw_lines() [2/8]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_raw_lines ( const unsigned int level ) const

Number of lines, used or unused, on the given level.

Note: This function really exports internal information about the triangulation. It shouldn't be used in applications. The function is only part of the public interface of this class because it is used in some of the other classes that build very closely on it (in particular, the DoFHandler class).

Definition at line 12883 of file tria.cc.

◆ n_raw_quads() [1/9]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_raw_quads

Total number of quads, used or unused.

Note: This function really exports internal information about the triangulation. It shouldn't be used in applications. The function is only part of the public interface of this class because it is used in some of the other classes that build very closely on it (in particular, the DoFHandler class).

Definition at line 13123 of file tria.cc.

◆ n_raw_quads() [2/9]

template<int dim, int spacedim = dim>

unsigned int Triangulation< dim, spacedim >::n_raw_quads ( const unsigned int level ) const

Number of quads, used or unused, on the given level.

Note: This function really exports internal information about the triangulation. It shouldn't be used in applications. The function is only part of the public interface of this class because it is used in some of the other classes that build very closely on it (in particular, the DoFHandler class).

◆ n_raw_hexs() [1/5]

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_raw_hexs ( const unsigned int level ) const

Number of hexs, used or unused, on the given level.

Note: This function really exports internal information about the triangulation. It shouldn't be used in applications. The function is only part of the public interface of this class because it is used in some of the other classes that build very closely on it (in particular, the DoFHandler class).

Definition at line 13179 of file tria.cc.

◆ n_raw_cells()

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_raw_cells ( const unsigned int level ) const

Number of cells, used or unused, on the given level.

Note: This function really exports internal information about the triangulation. It shouldn't be used in applications. The function is only part of the public interface of this class because it is used in some of the other classes that build very closely on it (in particular, the DoFHandler class).

Definition at line 12748 of file tria.cc.

◆ n_raw_faces()

template<int dim, int spacedim>

unsigned int Triangulation< dim, spacedim >::n_raw_faces

Return the total number of faces, used or not. In 2d, the result equals n_raw_lines(), in 3d it equals n_raw_quads(), while in 1D it equals the number of vertices.

Note: This function really exports internal information about the triangulation. It shouldn't be used in applications. The function is only part of the public interface of this class because it is used in some of the other classes that build very closely on it (in particular, the DoFHandler class).

Definition at line 12710 of file tria.cc.

◆ memory_consumption()

template<int dim, int spacedim>

std::size_t Triangulation< dim, spacedim >::memory_consumption

virtual

Determine an estimate for the memory consumption (in bytes) of this object.

This function is made virtual, since a triangulation object might be accessed through a pointer to this base class, even if the actual object is a derived class.

Reimplemented in parallel::distributed::Triangulation< dim >.

Definition at line 15157 of file tria.cc.

◆ save()

template<int dim, int spacedim = dim>

template<class Archive >

void Triangulation< dim, spacedim >::save	(	Archive &	ar,
		const unsigned int	version
	)		const

Write the data of this object to a stream for the purpose of serialization.

Note: This function does not save all member variables of the current triangulation. Rather, only certain kinds of information are stored. For more information see the general documentation of this class.

◆ load()

template<int dim, int spacedim = dim>

template<class Archive >

void Triangulation< dim, spacedim >::load	(	Archive &	ar,
		const unsigned int	version
	)

Read the data of this object from a stream for the purpose of serialization. Throw away the previous content.

Note: This function does not reset all member variables of the current triangulation to the ones of the triangulation that was previously stored to an archive. Rather, only certain kinds of information are loaded. For more information see the general documentation of this class.; This function calls the Triangulation::clear() function and consequently triggers the "clear" signal. After loading all data from the archive, it then triggers the "create" signal. For more information on signals, see the general documentation of this class.

◆ add_periodicity()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::add_periodicity ( const std::vector< GridTools::PeriodicFacePair< cell_iterator >> & periodicity_vector )

virtual

Declare the (coarse) face pairs given in the argument of this function as periodic. This way it is possible to obtain neighbors across periodic boundaries.

The vector can be filled by the function GridTools::collect_periodic_faces.

For more information on periodic boundary conditions see GridTools::collect_periodic_faces, DoFTools::make_periodicity_constraints and step-45.

Note: Before this function can be used the Triangulation has to be initialized and must not be refined.

Definition at line 13356 of file tria.cc.

◆ get_periodic_face_map()

template<int dim, int spacedim>

const std::map< std::pair< typename Triangulation< dim, spacedim >::cell_iterator, unsigned int >, std::pair< std::pair< typename Triangulation< dim, spacedim >::cell_iterator, unsigned int >, std::bitset< 3 > > > & Triangulation< dim, spacedim >::get_periodic_face_map

Return the periodic_face_map.

Definition at line 13376 of file tria.cc.

◆ serialize()

template<int dim, int spacedim = dim>

template<class Archive >

void Triangulation< dim, spacedim >::serialize	(	Archive &	archive,
		const unsigned int	version
	)

Write and read the data of this object from a stream for the purpose of serialization.

◆ write_bool_vector()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::write_bool_vector	(	const unsigned int	magic_number1,
		const std::vector< bool > &	v,
		const unsigned int	magic_number2,
		std::ostream &	out
	)

staticprotected

Write a bool vector to the given stream, writing a pre- and a postfix magic number. The vector is written in an almost binary format, i.e. the bool flags are packed but the data is written as ASCII text.

The flags are stored in a binary format: for each true, a 1 bit is stored, a 0 bit otherwise. The bits are stored as unsigned char, thus avoiding endianness. They are written to out in plain text, thus amounting to 3.6 bits in the output per bits in the input on the average. Other information (magic numbers and number of elements of the input vector) is stored as plain text as well. The format should therefore be interplatform compatible.

Definition at line 15084 of file tria.cc.

◆ read_bool_vector()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::read_bool_vector	(	const unsigned int	magic_number1,
		std::vector< bool > &	v,
		const unsigned int	magic_number2,
		std::istream &	in
	)

staticprotected

Re-read a vector of bools previously written by write_bool_vector and compare with the magic numbers.

Definition at line 15119 of file tria.cc.

◆ update_periodic_face_map()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::update_periodic_face_map

protected

Recreate information about periodic neighbors from periodic_face_pairs_level_0.

Definition at line 13444 of file tria.cc.

◆ begin_raw()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::raw_cell_iterator Triangulation< dim, spacedim >::begin_raw ( const unsigned int level = 0 ) const

private

Iterator to the first cell, used or not, on level level. If a level has no cells, a past-the-end iterator is returned.

Definition at line 11973 of file tria.cc.

◆ end_raw()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::raw_cell_iterator Triangulation< dim, spacedim >::end_raw ( const unsigned int level ) const

private

Return a raw iterator which is the first iterator not on level. If level is the last level, then this returns end().

Definition at line 12090 of file tria.cc.

◆ begin_raw_line()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::raw_line_iterator Triangulation< dim, spacedim >::begin_raw_line ( const unsigned int level = 0 ) const

private

Iterator to the first line, used or not, on level level. If a level has no lines, a past-the-end iterator is returned. If lines are no cells, i.e. for dim>1 no level argument must be given. The same applies for all the other functions above, of course.

Definition at line 12338 of file tria.cc.

◆ begin_line()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::line_iterator Triangulation< dim, spacedim >::begin_line ( const unsigned int level = 0 ) const

private

Iterator to the first used line on level level.

Note: The given level argument needs to correspond to a level of the triangulation, i.e., should be less than the value returned by n_levels(). On the other hand, for parallel computations using a parallel::distributed::Triangulation object, it is often convenient to write loops over the cells of all levels of the global mesh, even if the local portion of the triangulation does not actually have cells at one of the higher levels. In those cases, the level argument is accepted if it is less than what the n_global_levels() function returns. If the given level is between the values returned by n_levels() and n_global_levels(), then no cells exist in the local portion of the triangulation at this level, and the function simply returns what end() would return.

Definition at line 12378 of file tria.cc.

◆ begin_active_line()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::active_line_iterator Triangulation< dim, spacedim >::begin_active_line ( const unsigned int level = 0 ) const

private

Iterator to the first active line on level level.

Note: The given level argument needs to correspond to a level of the triangulation, i.e., should be less than the value returned by n_levels(). On the other hand, for parallel computations using a parallel::distributed::Triangulation object, it is often convenient to write loops over the cells of all levels of the global mesh, even if the local portion of the triangulation does not actually have cells at one of the higher levels. In those cases, the level argument is accepted if it is less than what the n_global_levels() function returns. If the given level is between the values returned by n_levels() and n_global_levels(), then no cells exist in the local portion of the triangulation at this level, and the function simply returns what end() would return.

Definition at line 12394 of file tria.cc.

◆ end_line()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::line_iterator Triangulation< dim, spacedim >::end_line

private

Iterator past the end; this iterator serves for comparisons of iterators with past-the-end or before-the-beginning states.

Definition at line 12410 of file tria.cc.

◆ begin_raw_quad()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::raw_quad_iterator Triangulation< dim, spacedim >::begin_raw_quad ( const unsigned int level = 0 ) const

private

Iterator to the first quad, used or not, on the given level. If a level has no quads, a past-the-end iterator is returned. If quads are no cells, i.e. for \(dim>2\) no level argument must be given.

Note: The given level argument needs to correspond to a level of the triangulation, i.e., should be less than the value returned by n_levels(). On the other hand, for parallel computations using a parallel::distributed::Triangulation object, it is often convenient to write loops over the cells of all levels of the global mesh, even if the local portion of the triangulation does not actually have cells at one of the higher levels. In those cases, the level argument is accepted if it is less than what the n_global_levels() function returns. If the given level is between the values returned by n_levels() and n_global_levels(), then no cells exist in the local portion of the triangulation at this level, and the function simply returns what end() would return.

Definition at line 12424 of file tria.cc.

◆ begin_quad()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::quad_iterator Triangulation< dim, spacedim >::begin_quad ( const unsigned int level = 0 ) const

private

Iterator to the first used quad on level level.

Note: The given level argument needs to correspond to a level of the triangulation, i.e., should be less than the value returned by n_levels(). On the other hand, for parallel computations using a parallel::distributed::Triangulation object, it is often convenient to write loops over the cells of all levels of the global mesh, even if the local portion of the triangulation does not actually have cells at one of the higher levels. In those cases, the level argument is accepted if it is less than what the n_global_levels() function returns. If the given level is between the values returned by n_levels() and n_global_levels(), then no cells exist in the local portion of the triangulation at this level, and the function simply returns what end() would return.

Definition at line 12478 of file tria.cc.

◆ begin_active_quad()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::active_quad_iterator Triangulation< dim, spacedim >::begin_active_quad ( const unsigned int level = 0 ) const

private

Iterator to the first active quad on level level.

Note: The given level argument needs to correspond to a level of the triangulation, i.e., should be less than the value returned by n_levels(). On the other hand, for parallel computations using a parallel::distributed::Triangulation object, it is often convenient to write loops over the cells of all levels of the global mesh, even if the local portion of the triangulation does not actually have cells at one of the higher levels. In those cases, the level argument is accepted if it is less than what the n_global_levels() function returns. If the given level is between the values returned by n_levels() and n_global_levels(), then no cells exist in the local portion of the triangulation at this level, and the function simply returns what end() would return.

Definition at line 12494 of file tria.cc.

◆ end_quad()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::quad_iterator Triangulation< dim, spacedim >::end_quad

private

Iterator past the end; this iterator serves for comparisons of iterators with past-the-end or before-the-beginning states.

Definition at line 12510 of file tria.cc.

◆ begin_raw_hex()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::raw_hex_iterator Triangulation< dim, spacedim >::begin_raw_hex ( const unsigned int level = 0 ) const

private

Iterator to the first hex, used or not, on level level. If a level has no hexes, a past-the-end iterator is returned.

Note: The given level argument needs to correspond to a level of the triangulation, i.e., should be less than the value returned by n_levels(). On the other hand, for parallel computations using a parallel::distributed::Triangulation object, it is often convenient to write loops over the cells of all levels of the global mesh, even if the local portion of the triangulation does not actually have cells at one of the higher levels. In those cases, the level argument is accepted if it is less than what the n_global_levels() function returns. If the given level is between the values returned by n_levels() and n_global_levels(), then no cells exist in the local portion of the triangulation at this level, and the function simply returns what end() would return.

Definition at line 12523 of file tria.cc.

◆ begin_hex()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::hex_iterator Triangulation< dim, spacedim >::begin_hex ( const unsigned int level = 0 ) const

private

Iterator to the first used hex on level level.

Note: The given level argument needs to correspond to a level of the triangulation, i.e., should be less than the value returned by n_levels(). On the other hand, for parallel computations using a parallel::distributed::Triangulation object, it is often convenient to write loops over the cells of all levels of the global mesh, even if the local portion of the triangulation does not actually have cells at one of the higher levels. In those cases, the level argument is accepted if it is less than what the n_global_levels() function returns. If the given level is between the values returned by n_levels() and n_global_levels(), then no cells exist in the local portion of the triangulation at this level, and the function simply returns what end() would return.

Definition at line 12569 of file tria.cc.

◆ begin_active_hex()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::active_hex_iterator Triangulation< dim, spacedim >::begin_active_hex ( const unsigned int level = 0 ) const

private

Iterator to the first active hex on level level.

Note: The given level argument needs to correspond to a level of the triangulation, i.e., should be less than the value returned by n_levels(). On the other hand, for parallel computations using a parallel::distributed::Triangulation object, it is often convenient to write loops over the cells of all levels of the global mesh, even if the local portion of the triangulation does not actually have cells at one of the higher levels. In those cases, the level argument is accepted if it is less than what the n_global_levels() function returns. If the given level is between the values returned by n_levels() and n_global_levels(), then no cells exist in the local portion of the triangulation at this level, and the function simply returns what end() would return.

Definition at line 12585 of file tria.cc.

◆ end_hex()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::hex_iterator Triangulation< dim, spacedim >::end_hex

private

Iterator past the end; this iterator serves for comparisons of iterators with past-the-end or before-the-beginning states.

Definition at line 12601 of file tria.cc.

◆ clear_despite_subscriptions()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::clear_despite_subscriptions

private

The (public) function clear() will only work when the triangulation is not subscribed to by other users. The clear_despite_subscriptions() function now allows the triangulation being cleared even when there are subscriptions.

Make sure, you know what you do, when calling this function, as its use is reasonable in very rare cases, only. For example, when the subscriptions were for the initially empty Triangulation and the Triangulation object wants to release its memory before throwing an assertion due to input errors (e.g. in the create_triangulation() function).

Definition at line 13507 of file tria.cc.

◆ reset_active_cell_indices()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::reset_active_cell_indices

private

For all cells, set the active cell indices so that active cells know the how many-th active cell they are, and all other cells have an invalid value. This function is called after mesh creation, refinement, and serialization.

Definition at line 13426 of file tria.cc.

◆ execute_refinement()

template<int dim, int spacedim>

Triangulation< dim, spacedim >::DistortedCellList Triangulation< dim, spacedim >::execute_refinement

private

Refine all cells on all levels which were previously flagged for refinement.

Note, that this function uses the line->user_flags for dim=2,3 and the quad->user_flags for dim=3.

The function returns a list of cells that have produced children that satisfy the criteria of distorted cells if the check_for_distorted_cells flag was specified upon creation of this object, at

Definition at line 13523 of file tria.cc.

◆ execute_coarsening()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::execute_coarsening

private

Coarsen all cells which were flagged for coarsening, or rather: delete all children of those cells of which all child cells are flagged for coarsening and several other constraints hold (see the general doc of this class).

Definition at line 13555 of file tria.cc.

◆ fix_coarsen_flags()

template<int dim, int spacedim>

void Triangulation< dim, spacedim >::fix_coarsen_flags

private

Make sure that either all or none of the children of a cell are tagged for coarsening.

Definition at line 13630 of file tria.cc.

◆ coarse_cell_id_to_coarse_cell_index()

template<int dim, int spacedim = dim>

virtual unsigned int Triangulation< dim, spacedim >::coarse_cell_id_to_coarse_cell_index ( const types::coarse_cell_id coarse_cell_id ) const

privatevirtual

Translate the unique id of a coarse cell to its index. See the glossary entry on coarse cell IDs for more information.

Note: For serial and shared triangulation both id and index are the same. For distributed triangulations setting both might differ, since the id might correspond to a global id and the index to a local id.

Parameters

coarse_cell_id Unique id of the coarse cell.

Returns: Index of the coarse cell within the current triangulation.

Reimplemented in parallel::distributed::Triangulation< 1, spacedim >, parallel::distributed::Triangulation< dim, spacedim >, parallel::distributed::Triangulation< dim, dim >, parallel::distributed::Triangulation< dim >, and parallel::fullydistributed::Triangulation< dim, spacedim >.

◆ coarse_cell_index_to_coarse_cell_id()

template<int dim, int spacedim = dim>

virtual types::coarse_cell_id Triangulation< dim, spacedim >::coarse_cell_index_to_coarse_cell_id ( const unsigned int coarse_cell_index ) const

privatevirtual

Translate the index of coarse cell to its unique id. See the glossary entry on coarse cell IDs for more information.

Note: See the note of the method coarse_cell_id_to_coarse_cell_index().

Parameters

coarse_cell_index Index of the coarse cell.

Returns: Id of the coarse cell.

Reimplemented in parallel::distributed::Triangulation< 1, spacedim >, parallel::distributed::Triangulation< dim, spacedim >, parallel::distributed::Triangulation< dim, dim >, parallel::distributed::Triangulation< dim >, and parallel::fullydistributed::Triangulation< dim, spacedim >.

◆ n_raw_lines() [3/8]

unsigned int Triangulation< 1, 1 >::n_raw_lines ( const unsigned int level ) const

Definition at line 12828 of file tria.cc.

◆ n_raw_lines() [4/8]

unsigned int Triangulation< 1, 1 >::n_raw_lines ( ) const

Definition at line 12837 of file tria.cc.

◆ n_raw_lines() [5/8]

unsigned int Triangulation< 1, 2 >::n_raw_lines ( const unsigned int level ) const

Definition at line 12847 of file tria.cc.

◆ n_raw_lines() [6/8]

unsigned int Triangulation< 1, 2 >::n_raw_lines ( ) const

Definition at line 12856 of file tria.cc.

◆ n_raw_lines() [7/8]

unsigned int Triangulation< 1, 3 >::n_raw_lines ( const unsigned int level ) const

Definition at line 12865 of file tria.cc.

◆ n_raw_lines() [8/8]

unsigned int Triangulation< 1, 3 >::n_raw_lines ( ) const

Definition at line 12873 of file tria.cc.

◆ n_quads() [3/8]

unsigned int Triangulation< 1, 1 >::n_quads ( ) const

Definition at line 12929 of file tria.cc.

◆ n_quads() [4/8]

unsigned int Triangulation< 1, 1 >::n_quads ( const unsigned int ) const

Definition at line 12937 of file tria.cc.

◆ n_raw_quads() [3/9]

unsigned int Triangulation< 1, 1 >::n_raw_quads ( const unsigned int ) const

Definition at line 12945 of file tria.cc.

◆ n_raw_hexs() [2/5]

unsigned int Triangulation< 1, 1 >::n_raw_hexs ( const unsigned int ) const

Definition at line 12953 of file tria.cc.

◆ n_active_quads() [3/8]

unsigned int Triangulation< 1, 1 >::n_active_quads ( const unsigned int ) const

Definition at line 12961 of file tria.cc.

◆ n_active_quads() [4/8]

unsigned int Triangulation< 1, 1 >::n_active_quads ( ) const

Definition at line 12969 of file tria.cc.

◆ n_quads() [5/8]

unsigned int Triangulation< 1, 2 >::n_quads ( ) const

Definition at line 12978 of file tria.cc.

◆ n_quads() [6/8]

unsigned int Triangulation< 1, 2 >::n_quads ( const unsigned int ) const

Definition at line 12986 of file tria.cc.

◆ n_raw_quads() [4/9]

unsigned int Triangulation< 1, 2 >::n_raw_quads ( const unsigned int ) const

Definition at line 12994 of file tria.cc.

◆ n_raw_hexs() [3/5]

unsigned int Triangulation< 1, 2 >::n_raw_hexs ( const unsigned int ) const

Definition at line 13002 of file tria.cc.

◆ n_active_quads() [5/8]

unsigned int Triangulation< 1, 2 >::n_active_quads ( const unsigned int ) const

Definition at line 13010 of file tria.cc.

◆ n_active_quads() [6/8]

unsigned int Triangulation< 1, 2 >::n_active_quads ( ) const

Definition at line 13018 of file tria.cc.

◆ n_quads() [7/8]

unsigned int Triangulation< 1, 3 >::n_quads ( ) const

Definition at line 13026 of file tria.cc.

◆ n_quads() [8/8]

unsigned int Triangulation< 1, 3 >::n_quads ( const unsigned int ) const

Definition at line 13034 of file tria.cc.

◆ n_raw_quads() [5/9]

unsigned int Triangulation< 1, 3 >::n_raw_quads ( const unsigned int ) const

Definition at line 13042 of file tria.cc.

◆ n_raw_hexs() [4/5]

unsigned int Triangulation< 1, 3 >::n_raw_hexs ( const unsigned int ) const

Definition at line 13050 of file tria.cc.

◆ n_active_quads() [7/8]

unsigned int Triangulation< 1, 3 >::n_active_quads ( const unsigned int ) const

Definition at line 13058 of file tria.cc.

◆ n_active_quads() [8/8]

unsigned int Triangulation< 1, 3 >::n_active_quads ( ) const

Definition at line 13066 of file tria.cc.

◆ n_raw_quads() [6/9]

unsigned int Triangulation< 2, 2 >::n_raw_quads ( const unsigned int level ) const

Definition at line 13094 of file tria.cc.

◆ n_raw_quads() [7/9]

unsigned int Triangulation< 2, 3 >::n_raw_quads ( const unsigned int level ) const

Definition at line 13104 of file tria.cc.

◆ n_raw_quads() [8/9]

unsigned int Triangulation< 3, 3 >::n_raw_quads ( const unsigned int ) const

Definition at line 13113 of file tria.cc.

◆ n_raw_quads() [9/9]

unsigned int Triangulation< 3, 3 >::n_raw_quads ( ) const

Definition at line 13133 of file tria.cc.

◆ n_hexs() [3/4]

unsigned int Triangulation< 3, 3 >::n_hexs ( ) const

Definition at line 13204 of file tria.cc.

◆ n_hexs() [4/4]

unsigned int Triangulation< 3, 3 >::n_hexs ( const unsigned int level ) const

Definition at line 13213 of file tria.cc.

◆ n_raw_hexs() [5/5]

unsigned int Triangulation< 3, 3 >::n_raw_hexs ( const unsigned int level ) const

Definition at line 13224 of file tria.cc.

◆ n_active_hexs() [3/4]

unsigned int Triangulation< 3, 3 >::n_active_hexs ( ) const

Definition at line 13233 of file tria.cc.

◆ n_active_hexs() [4/4]

unsigned int Triangulation< 3, 3 >::n_active_hexs ( const unsigned int level ) const

Definition at line 13242 of file tria.cc.

◆ max_adjacent_cells() [2/4]

unsigned int Triangulation< 1, 1 >::max_adjacent_cells ( ) const

Definition at line 13271 of file tria.cc.

◆ max_adjacent_cells() [3/4]

unsigned int Triangulation< 1, 2 >::max_adjacent_cells ( ) const

Definition at line 13280 of file tria.cc.

◆ max_adjacent_cells() [4/4]

unsigned int Triangulation< 1, 3 >::max_adjacent_cells ( ) const

Definition at line 13288 of file tria.cc.

◆ prepare_coarsening_and_refinement() [2/4]

bool Triangulation< 1, 1 >::prepare_coarsening_and_refinement ( )

Definition at line 13840 of file tria.cc.

◆ prepare_coarsening_and_refinement() [3/4]

bool Triangulation< 1, 2 >::prepare_coarsening_and_refinement ( )

Definition at line 13859 of file tria.cc.

◆ prepare_coarsening_and_refinement() [4/4]

bool Triangulation< 1, 3 >::prepare_coarsening_and_refinement ( )

Definition at line 13878 of file tria.cc.

Friends And Related Function Documentation

◆ TriaAccessorBase

template<int dim, int spacedim = dim>

template<int , int , int >

friend class TriaAccessorBase

friend

Definition at line 3927 of file tria.h.

◆ TriaAccessor

template<int dim, int spacedim = dim>

template<int , int , int >

friend class TriaAccessor

friend

Definition at line 3929 of file tria.h.

◆ TriaAccessor< 0, 1, spacedim >

template<int dim, int spacedim = dim>

friend class TriaAccessor< 0, 1, spacedim >

friend

Definition at line 3930 of file tria.h.

◆ CellAccessor< dim, spacedim >

template<int dim, int spacedim = dim>

friend class CellAccessor< dim, spacedim >

friend

Definition at line 3932 of file tria.h.

◆ ::internal::TriaAccessorImplementation::Implementation

template<int dim, int spacedim = dim>

friend struct ::internal::TriaAccessorImplementation::Implementation

friend

Definition at line 3934 of file tria.h.

◆ hp::DoFHandler< dim, spacedim >

template<int dim, int spacedim = dim>

friend class hp::DoFHandler< dim, spacedim >

friend

Definition at line 3936 of file tria.h.

◆ ::internal::TriangulationImplementation::Implementation

template<int dim, int spacedim = dim>

friend struct ::internal::TriangulationImplementation::Implementation

friend

Definition at line 3938 of file tria.h.

◆ ::internal::TriangulationImplementation::TriaObjects

template<int dim, int spacedim = dim>

template<typename >

friend class ::internal::TriangulationImplementation::TriaObjects

friend

Definition at line 3941 of file tria.h.

◆ CellId

template<int dim, int spacedim = dim>

friend class CellId

friend

Definition at line 3943 of file tria.h.

Member Data Documentation

◆ dimension

template<int dim, int spacedim>

const unsigned int Triangulation< dim, spacedim >::dimension = dim

static

Make the dimension available in function templates.

Definition at line 1524 of file tria.h.

◆ space_dimension

template<int dim, int spacedim = dim>

const unsigned int Triangulation< dim, spacedim >::space_dimension = spacedim

static

Make the space-dimension available in function templates.

Definition at line 1529 of file tria.h.

◆ signals

template<int dim, int spacedim = dim>

Signals Triangulation< dim, spacedim >::signals

mutable

Signals for the various actions that a triangulation can do to itself.

Definition at line 2222 of file tria.h.

◆ smooth_grid

template<int dim, int spacedim = dim>

MeshSmoothing Triangulation< dim, spacedim >::smooth_grid

protected

Do some smoothing in the process of refining the triangulation. See the general doc of this class for more information about this.

Definition at line 3419 of file tria.h.

◆ periodic_face_pairs_level_0

template<int dim, int spacedim = dim>

std::vector<GridTools::PeriodicFacePair<cell_iterator> > Triangulation< dim, spacedim >::periodic_face_pairs_level_0

private

If add_periodicity() is called, this variable stores the given periodic face pairs on level 0 for later access during the identification of ghost cells for the multigrid hierarchy and for setting up the periodic_face_map.

Definition at line 3466 of file tria.h.

◆ periodic_face_map

template<int dim, int spacedim = dim>

std::map<std::pair<cell_iterator, unsigned int>, std::pair<std::pair<cell_iterator, unsigned int>, std::bitset<3> > > Triangulation< dim, spacedim >::periodic_face_map

private

If add_periodicity() is called, this variable stores the active periodic face pairs.

Definition at line 3474 of file tria.h.

◆ levels

template<int dim, int spacedim = dim>

std::vector<std::unique_ptr< ::internal::TriangulationImplementation::TriaLevel<dim> > > Triangulation< dim, spacedim >::levels

private

Array of pointers pointing to the objects storing the cell data on the different levels.

Definition at line 3834 of file tria.h.

◆ faces

template<int dim, int spacedim = dim>

std::unique_ptr<::internal::TriangulationImplementation::TriaFaces<dim> > Triangulation< dim, spacedim >::faces

private

Pointer to the faces of the triangulation. In 1d this contains nothing, in 2D it contains data concerning lines and in 3D quads and lines. All of these have no level and are therefore treated separately.

Definition at line 3842 of file tria.h.

◆ vertices

template<int dim, int spacedim = dim>

std::vector<Point<spacedim> > Triangulation< dim, spacedim >::vertices

private

Array of the vertices of this triangulation.

Definition at line 3848 of file tria.h.

◆ vertices_used

template<int dim, int spacedim = dim>

std::vector<bool> Triangulation< dim, spacedim >::vertices_used

private

Array storing a bit-pattern which vertices are used.

Definition at line 3853 of file tria.h.

◆ manifold

template<int dim, int spacedim = dim>

std::map<types::manifold_id, std::unique_ptr<const Manifold<dim, spacedim> > > Triangulation< dim, spacedim >::manifold

private

Collection of manifold objects. We store only objects, which are not of type FlatManifold.

Definition at line 3860 of file tria.h.

◆ anisotropic_refinement

template<int dim, int spacedim = dim>

bool Triangulation< dim, spacedim >::anisotropic_refinement

private

Flag indicating whether anisotropic refinement took place.

Definition at line 3865 of file tria.h.

◆ check_for_distorted_cells

template<int dim, int spacedim = dim>

const bool Triangulation< dim, spacedim >::check_for_distorted_cells

private

A flag that determines whether we are to check for distorted cells upon creation and refinement of a mesh.

Definition at line 3872 of file tria.h.

◆ number_cache

template<int dim, int spacedim = dim>

::internal::TriangulationImplementation::NumberCache<dim> Triangulation< dim, spacedim >::number_cache

private

Cache to hold the numbers of lines, quads, hexes, etc. These numbers are set at the end of the refinement and coarsening functions and enable faster access later on. In the old days, whenever one wanted to access one of these numbers, one had to perform a loop over all lines, e.g., and count the elements until we hit the end iterator. This is time consuming and since access to the number of lines etc is a rather frequent operation, this was not an optimal solution.

Definition at line 3883 of file tria.h.

◆ vertex_to_boundary_id_map_1d

template<int dim, int spacedim = dim>

std::unique_ptr<std::map<unsigned int, types::boundary_id> > Triangulation< dim, spacedim >::vertex_to_boundary_id_map_1d

private

A map that relates the number of a boundary vertex to the boundary indicator. This field is only used in 1d. We have this field because we store boundary indicator information with faces in 2d and higher where we have space in the structures that store data for faces, but in 1d there is no such space for faces.

The field is declared as a pointer for a rather mundane reason: all other fields of this class that can be modified by the TriaAccessor hierarchy are pointers, and so these accessor classes store a const pointer to the triangulation. We could no longer do so for TriaAccessor<0,1,spacedim> if this field (that can be modified by TriaAccessor::set_boundary_id) were not a pointer.

Definition at line 3900 of file tria.h.

◆ vertex_to_manifold_id_map_1d

template<int dim, int spacedim = dim>

std::unique_ptr<std::map<unsigned int, types::manifold_id> > Triangulation< dim, spacedim >::vertex_to_manifold_id_map_1d

private

A map that relates the number of a boundary vertex to the manifold indicator. This field is only used in 1d. We have this field because we store manifold indicator information with faces in 2d and higher where we have space in the structures that store data for faces, but in 1d there is no such space for faces.

Note: Manifold objects are pretty useless for points since they are neither refined nor are their interiors mapped. We nevertheless allow storing manifold ids for points to be consistent in dimension-independent programs.

The field is declared as a pointer for a rather mundane reason: all other fields of this class that can be modified by the TriaAccessor hierarchy are pointers, and so these accessor classes store a const pointer to the triangulation. We could no longer do so for TriaAccessor<0,1,spacedim> if this field (that can be modified by TriaAccessor::set_manifold_id) were not a pointer.

Definition at line 3923 of file tria.h.

The documentation for this class was generated from the following files:

include/deal.II/grid/tria.h
source/grid/tria.cc

Classes

Public Types

Public Member Functions

Static Public Attributes

Private Types

Private Member Functions

Keeping up with what happens to a triangulation

Exceptions

Cell iterator functions for internal use

Hex iterator functions for internal use

Additional Inherited Members

Detailed Description

template<int dim, int spacedim = dim> class Triangulation< dim, spacedim >

Structure and iterators

Usage

Creating a triangulation

Refinement and coarsening of a triangulation

Smoothing of a triangulation

Material and boundary information

History of a triangulation

User flags and data

Describing curved geometries

Getting notice when a triangulation changes

Serializing (loading or storing) triangulations

Technical details

Algorithms for mesh regularization and smoothing upon refinement

Warning

Member Typedef Documentation

◆ IteratorSelector

◆ raw_cell_iterator

◆ raw_face_iterator

◆ raw_vertex_iterator

◆ raw_line_iterator

◆ raw_quad_iterator

◆ raw_hex_iterator

Member Enumeration Documentation

◆ MeshSmoothing

◆ CellStatus

Constructor & Destructor Documentation

◆ Triangulation() [1/3]

◆ Triangulation() [2/3]

◆ Triangulation() [3/3]

◆ ~Triangulation()

Member Function Documentation

◆ operator=()

◆ clear()

◆ set_mesh_smoothing()

◆ get_mesh_smoothing()

◆ get_boundary_ids()

◆ copy_triangulation()

◆ create_triangulation() [1/2]

◆ create_triangulation() [2/2]

◆ create_triangulation_compatibility()

◆ flip_all_direction_flags()

◆ set_all_refine_flags()

◆ refine_global()

◆ execute_coarsening_and_refinement()

◆ prepare_coarsening_and_refinement() [1/4]

◆ save_refine_flags() [1/2]

◆ save_refine_flags() [2/2]

◆ load_refine_flags() [1/2]

◆ load_refine_flags() [2/2]

◆ save_coarsen_flags() [1/2]

◆ save_coarsen_flags() [2/2]

◆ load_coarsen_flags() [1/2]

◆ load_coarsen_flags() [2/2]

◆ get_anisotropic_refinement_flag()

◆ clear_user_flags()

◆ save_user_flags() [1/2]

◆ save_user_flags() [2/2]

◆ load_user_flags() [1/2]

◆ load_user_flags() [2/2]

◆ clear_user_flags_line()

◆ save_user_flags_line() [1/2]

◆ save_user_flags_line() [2/2]

◆ load_user_flags_line() [1/2]

◆ load_user_flags_line() [2/2]

◆ clear_user_flags_quad()

◆ save_user_flags_quad() [1/2]

◆ save_user_flags_quad() [2/2]

template<int dim, int spacedim = dim>
class Triangulation< dim, spacedim >