#include <deal.II/grid/grid_out.h>

Public Types
enum	OutputFormat { none, dx, gnuplot, eps, ucd, xfig, msh, svg, mathgl, vtk, vtu }

Public Member Functions
	GridOut ()

template<int dim, int spacedim>
void	write_dx (const Triangulation< dim, spacedim > &tria, std::ostream &out) const

template<int dim, int spacedim>
void	write_gnuplot (const Triangulation< dim, spacedim > &tria, std::ostream &out, const Mapping< dim, spacedim > *mapping=nullptr) const

template<int dim, int spacedim>
void	write_msh (const Triangulation< dim, spacedim > &tria, std::ostream &out) const

template<int dim, int spacedim>
void	write_ucd (const Triangulation< dim, spacedim > &tria, std::ostream &out) const

template<int dim, int spacedim>
void	write_eps (const Triangulation< dim, spacedim > &tria, std::ostream &out, const Mapping< dim, spacedim > *mapping=nullptr) const

template<int dim, int spacedim>
void	write_xfig (const Triangulation< dim, spacedim > &tria, std::ostream &out, const Mapping< dim, spacedim > *mapping=nullptr) const

void	write_svg (const Triangulation< 2, 2 > &tria, std::ostream &out) const

template<int dim, int spacedim>
void	write_svg (const Triangulation< dim, spacedim > &tria, std::ostream &out) const

template<int dim, int spacedim>
void	write_mathgl (const Triangulation< dim, spacedim > &tria, std::ostream &out) const

template<int dim, int spacedim>
void	write_vtk (const Triangulation< dim, spacedim > &tria, std::ostream &out) const

template<int dim, int spacedim>
void	write_vtu (const Triangulation< dim, spacedim > &tria, std::ostream &out) const

template<int dim, int spacedim>
void	write_mesh_per_processor_as_vtu (const Triangulation< dim, spacedim > &tria, const std::string &filename_without_extension, const bool view_levels=false, const bool include_artificial=false) const

template<int dim, int spacedim>
void	write (const Triangulation< dim, spacedim > &tria, std::ostream &out, const OutputFormat output_format, const Mapping< dim, spacedim > *mapping=nullptr) const

template<int dim, int spacedim>
void	write (const Triangulation< dim, spacedim > &tria, std::ostream &out, const Mapping< dim, spacedim > *mapping=nullptr) const

void	set_flags (const GridOutFlags::DX &flags)

void	set_flags (const GridOutFlags::Msh &flags)

void	set_flags (const GridOutFlags::Ucd &flags)

void	set_flags (const GridOutFlags::Gnuplot &flags)

void	set_flags (const GridOutFlags::Eps< 1 > &flags)

void	set_flags (const GridOutFlags::Eps< 2 > &flags)

void	set_flags (const GridOutFlags::Eps< 3 > &flags)

void	set_flags (const GridOutFlags::XFig &flags)

void	set_flags (const GridOutFlags::Svg &flags)

void	set_flags (const GridOutFlags::MathGL &flags)

void	set_flags (const GridOutFlags::Vtk &flags)

void	set_flags (const GridOutFlags::Vtu &flags)

std::string	default_suffix () const

void	parse_parameters (ParameterHandler &param)

std::size_t	memory_consumption () const

Static Public Member Functions
static std::string	default_suffix (const OutputFormat output_format)

static OutputFormat	parse_output_format (const std::string &format_name)

static std::string	get_output_format_names ()

static void	declare_parameters (ParameterHandler &param)

static ::ExceptionBase &	ExcInvalidState ()

Private Member Functions
template<int dim, int spacedim>
unsigned int	write_msh_faces (const Triangulation< dim, spacedim > &tria, const unsigned int next_element_index, std::ostream &out) const

unsigned int	write_msh_faces (const Triangulation< 1, 1 > &tria, const unsigned int next_element_index, std::ostream &out) const

unsigned int	write_msh_faces (const Triangulation< 1, 2 > &tria, const unsigned int next_element_index, std::ostream &out) const

template<int dim, int spacedim>
unsigned int	write_msh_lines (const Triangulation< dim, spacedim > &tria, const unsigned int next_element_index, std::ostream &out) const

unsigned int	write_msh_lines (const Triangulation< 1, 1 > &tria, const unsigned int next_element_index, std::ostream &out) const

unsigned int	write_msh_lines (const Triangulation< 1, 2 > &tria, const unsigned int next_element_index, std::ostream &out) const

unsigned int	write_msh_lines (const Triangulation< 2, 2 > &tria, const unsigned int next_element_index, std::ostream &out) const

unsigned int	write_msh_lines (const Triangulation< 2, 3 > &tria, const unsigned int next_element_index, std::ostream &out) const

template<int dim, int spacedim>
unsigned int	write_ucd_faces (const Triangulation< dim, spacedim > &tria, const unsigned int next_element_index, std::ostream &out) const

unsigned int	write_ucd_faces (const Triangulation< 1, 1 > &tria, const unsigned int next_element_index, std::ostream &out) const

unsigned int	write_ucd_faces (const Triangulation< 1, 2 > &tria, const unsigned int next_element_index, std::ostream &out) const

template<int dim, int spacedim>
unsigned int	write_ucd_lines (const Triangulation< dim, spacedim > &tria, const unsigned int next_element_index, std::ostream &out) const

unsigned int	write_ucd_lines (const Triangulation< 1, 1 > &tria, const unsigned int next_element_index, std::ostream &out) const

unsigned int	write_ucd_lines (const Triangulation< 1, 2 > &tria, const unsigned int next_element_index, std::ostream &out) const

unsigned int	write_ucd_lines (const Triangulation< 2, 2 > &tria, const unsigned int next_element_index, std::ostream &out) const

unsigned int	write_ucd_lines (const Triangulation< 2, 3 > &tria, const unsigned int next_element_index, std::ostream &out) const

template<int dim, int spacedim>
unsigned int	n_boundary_faces (const Triangulation< dim, spacedim > &tria) const

unsigned int	n_boundary_faces (const Triangulation< 1, 1 > &tria) const

unsigned int	n_boundary_faces (const Triangulation< 1, 2 > &tria) const

template<int dim, int spacedim>
unsigned int	n_boundary_lines (const Triangulation< dim, spacedim > &tria) const

unsigned int	n_boundary_lines (const Triangulation< 1, 1 > &tria) const

unsigned int	n_boundary_lines (const Triangulation< 1, 2 > &tria) const

unsigned int	n_boundary_lines (const Triangulation< 2, 2 > &tria) const

unsigned int	n_boundary_lines (const Triangulation< 2, 3 > &tria) const

Static Private Member Functions
static Point< 2 >	svg_project_point (Point< 3 > point, Point< 3 > camera_position, Point< 3 > camera_direction, Point< 3 > camera_horizontal, float camera_focus)

Detailed Description

This class provides a means to output a triangulation to a file in different formats. See the enum GridOut::OutputFormat for a list of formats and the corresponding output function names.

Usage is simple: either you use the direct form

ofstream output_file("some_filename");

GridOut().write_gnuplot (tria, output_file);

if you know which format you want to have, or if you want the format to be a runtime parameter, you can write

GridOut::OutputFormat grid_format =
                GridOut::parse_output_format(get_format_name_from_somewhere());
ofstream output_file("some_filename" + GridOut::default_suffix(output_format));
GridOut().write (tria, output_file, output_format);

The function get_output_format_names() provides a list of possible names of output formats in a string that is understandable by the ParameterHandler class.

Note that here, we have created an unnamed object of type GridOut and called one of its write_* functions. This looks like as if the respective function could really be made static. This was not done in order to allow for parameters to be passed to the different output functions in a way compatible with the scheme of allowing the right output format to be selected at run-time through the generic write function.

In order to explain this, consider each function had one or more additional parameters giving the details of output, for example position of the spectator for 3d meshed, line thicknesses, etc. While this would allow each output function any flexibility it needs, it would not allow us to use the generic function write which is given a parameter determining the output format, since it is impractical to give it a list of parameters for each and every output format supported which it may then pass on to the respective output function.

Rather, we have chosen to let each object of this class GridOut have a set of parameters for each supported output format. These are collected in structures GridOutFlags::Eps(), GridOutFlags::Gnuplot(), etc declared in the GridOutFlags namespace, and you can set your preferred flags like this:

GridOut grid_out;
GridOutFlags::Ucd ucd_flags;
...    // set some fields in ucd_flags
grid_out.set_flags (ucd_flags);
...
...    // write some file with data_out

The respective output function then use the so-set flags. By default, they are set to reasonable values as described above and in the documentation of the different flags structures. Resetting the flags can be done by calling grid_out.set_flags (GridOutFlags::Ucd());, since the default constructor of each of the flags structures sets the parameters to their initial values.

The advantage of this approach is that it is possible to change the flags of one or more output formats according to your needs and later use the generic write function; the actual output function then called will use the flags as set before.

Note that some of the structures describing the flags of the different output formats are empty since the respective format does not support any flags. The structure and the set_flags function are provided anyway. Note also that some of the structures may differ between the dimensions supported by this class; they then have a template parameter, as usual.

Author: Wolfgang Bangerth, Guido Kanschat, Luca Heltai, Stefan Nauber, Christian Wülker

Date: 1999 - 2013

Definition at line 837 of file grid_out.h.

Member Enumeration Documentation

◆ OutputFormat

enum GridOut::OutputFormat

Declaration of a name for each of the different output formats. These are used by the generic output function write() to determine the actual output format.

Enumerator
none	Do nothing in write()
dx	write() calls write_dx()
gnuplot	write() calls write_gnuplot()
eps	write() calls write_eps()
ucd	write() calls write_ucd()
xfig	write() calls write_xfig()
msh	write() calls write_msh()
svg	write() calls write_svg()
mathgl	write() calls write_mathgl()
vtk	write() calls write_vtk()
vtu	write() calls write_vtu()

Definition at line 845 of file grid_out.h.

Constructor & Destructor Documentation

◆ GridOut()

GridOut::GridOut ( )

Constructor.

Definition at line 402 of file grid_out.cc.

Member Function Documentation

◆ write_dx()

template<int dim, int spacedim>

void GridOut::write_dx	(	const Triangulation< dim, spacedim > &	tria,
		std::ostream &	out
	)		const

Write triangulation in OpenDX format.

Cells or faces are written together with their level and their material id or boundary indicator, resp.

Not implemented for the codimension one case.

Definition at line 712 of file grid_out.cc.

◆ write_gnuplot()

template<int dim, int spacedim>

void GridOut::write_gnuplot	(	const Triangulation< dim, spacedim > &	tria,
		std::ostream &	out,
		const Mapping< dim, spacedim > *	mapping = `nullptr`
	)		const

Write the triangulation in the gnuplot format.

In GNUPLOT format, each cell is written as a sequence of its confining lines. Apart from the coordinates of the line's end points, the level and the material of the cell are appended to each line of output. Therefore, if you let GNUPLOT draw a 2d grid as a 3d plot, you will see more refined cells being raised against cells with less refinement. Also, if you draw a cut through a 3d grid, you can extrude the refinement level in the direction orthogonal to the cut plane. The same can be done with the material id, which is plotted after the level.

A more useful application of this feature is the following: if you use the GNUPLOT command (for a 2d grid here)

* splot [:][:][2.5:3.5] "grid_file.gnuplot" *
*

then the whole x- and y-range will be plotted, i.e. the whole grid, but only those lines with a z-value between 2.5 and 3.5. Since the z-values were chosen to be the level to which a cell belongs, this results in a plot of those cells only that belong to level 3 in this example. This way, it is easy to produce plots of the different levels of grid.

mapping is a pointer to a mapping used for the transformation of cells at the boundary. If zero, then use standard Q1 mapping.

Names and values of additional flags controlling the output can be found in the documentation of the GridOutFlags::Gnuplot() class.

Not implemented for the codimension one case.

Definition at line 3500 of file grid_out.cc.

◆ write_msh()

template<int dim, int spacedim>

void GridOut::write_msh	(	const Triangulation< dim, spacedim > &	tria,
		std::ostream &	out
	)		const

Write the triangulation in the msh format.

Msh is the format used by Gmsh and it is described in the Gmsh user's guide. Besides the usual output of the grid only, you can decide through additional flags (see below, and the documentation of the GridOutFlags::Msh() class) whether boundary faces with non-zero boundary indicator shall be written to the file explicitly. This is useful, if you want to re-read the grid later on, since deal.II sets the boundary indicator to zero by default; therefore, to obtain the same triangulation as before, you have to specify faces with differing boundary indicators explicitly, which is done by this flag.

Names and values of further flags controlling the output can be found in the documentation of the GridOutFlags::Msh() class.

Works also in the codimension one case.

Definition at line 945 of file grid_out.cc.

◆ write_ucd()

template<int dim, int spacedim>

void GridOut::write_ucd	(	const Triangulation< dim, spacedim > &	tria,
		std::ostream &	out
	)		const

Write the triangulation in the ucd format.

UCD (unstructured cell data) is the format used by AVS and some other programs. It is described in the AVS developer's guide. Besides the usual output of the grid only, you can decide through additional flags (see below, and the documentation of the GridOutFlags::Ucd() class) whether boundary faces with non-zero boundary indicator shall be written to the file explicitly. This is useful, if you want to re-read the grid later on, since deal.II sets the boundary indicator to zero by default; therefore, to obtain the same triangulation as before, you have to specify faces with differing boundary indicators explicitly, which is done by this flag.

Names and values of further flags controlling the output can be found in the documentation of the GridOutFlags::Ucd() class.

Works also for the codimension one case.

Definition at line 1091 of file grid_out.cc.

◆ write_eps()

template<int dim, int spacedim>

void GridOut::write_eps	(	const Triangulation< dim, spacedim > &	tria,
		std::ostream &	out,
		const Mapping< dim, spacedim > *	mapping = `nullptr`
	)		const

Write the triangulation in the encapsulated postscript format.

In this format, each line of the triangulation is written separately. We scale the picture such that either x-values or y-values range between zero and a fixed size. The other axis is scaled by the same factor. Which axis is taken to compute the scale and the size of the box it shall fit into is determined by the output flags (see below, and the documentation of the GridOutFlags::Eps() class).

The bounding box is close to the triangulation on all four sides, without an extra frame. The line width is chosen to be 0.5 by default, but can be changed. The line width is to be compared with the extension of the picture, of which the default is 300.

The flag color_lines_on_user_flag allows to draw lines with the user_flag set to be drawn in red. The colors black and red are defined as b and r in the preamble of the output file and can be changed there according to need.

mapping is a pointer to a mapping used for the transformation of cells at the boundary. If zero, then use standard Q1 mapping.

Names and values of additional flags controlling the output can be found in the documentation of the GridOutFlags::Eps() class. Especially the viewpoint for three dimensional grids is of importance here.

Not implemented for the codimension one case.

Definition at line 4026 of file grid_out.cc.

◆ write_xfig()

template<int dim, int spacedim>

void GridOut::write_xfig	(	const Triangulation< dim, spacedim > &	tria,
		std::ostream &	out,
		const Mapping< dim, spacedim > *	mapping = `nullptr`
	)		const

Write two-dimensional XFig-file.

This function writes all grid cells as polygons and optionally boundary lines. Several parameters can be adjusted by the XFigFlags control object.

If levels are coded to depth, the complete grid hierarchy is plotted with fine cells before their parents. This way, levels can be switched on and off in xfig by selecting levels.

Polygons are either at depth 900-level or at 900+material_id, depending on the flag level_depth. Accordingly, boundary edges are at depth 800-level or at 800+boundary_id. Therefore, boundary edges are always in front of cells.

Not implemented for the codimension one case.

Definition at line 1217 of file grid_out.cc.

◆ write_svg() [1/2]

void GridOut::write_svg	(	const Triangulation< 2, 2 > &	tria,
		std::ostream &	out
	)		const

Write the triangulation in the SVG format.

SVG (Scalable Vector Graphics) is an XML-based vector image format developed and maintained by the World Wide Web Consortium (W3C). This function conforms to the latest specification SVG 1.1, released on August 16, 2011.

The cells of the triangulation are written as polygons with additional lines at the boundary of the triangulation. A coloring of the cells is further possible in order to visualize a certain property of the cells such as their level or material id. A colorbar can be drawn to encode the chosen coloring. Moreover, a cell label can be added, showing level index, etc.

Note: This function is currently only implemented for two-dimensional grids in two space dimensions.

Definition at line 1425 of file grid_out.cc.

◆ write_svg() [2/2]

template<int dim, int spacedim>

void GridOut::write_svg	(	const Triangulation< dim, spacedim > &	tria,
		std::ostream &	out
	)		const

Declaration of the same function as above for all other dimensions and space dimensions. This function is not currently implemented and is only declared to exist to support dimension independent programming.

Definition at line 1418 of file grid_out.cc.

◆ write_mathgl()

template<int dim, int spacedim>

void GridOut::write_mathgl	(	const Triangulation< dim, spacedim > &	tria,
		std::ostream &	out
	)		const

Write triangulation in MathGL script format. To interpret this file a version of MathGL>=2.0.0 is required.

To get a handle on the resultant MathGL script within a graphical environment an interpreter is needed. A suggestion to start with is mglview, which is bundled with MathGL. mglview can interpret and display small-to-medium MathGL scripts in a graphical window and enables conversion to other formats such as EPS, PNG, JPG, SVG, as well as view/display animations. Some minor editing, such as modifying the lighting or alpha channels, can also be done.

Note: Not implemented for the codimension one case.

Definition at line 2295 of file grid_out.cc.

◆ write_vtk()

template<int dim, int spacedim>

void GridOut::write_vtk	(	const Triangulation< dim, spacedim > &	tria,
		std::ostream &	out
	)		const

Write triangulation in VTK format.

Due to the way this function writes data to the output stream, the resulting output files correspond to a faithful representation of the mesh in that all cells are visible for visualization. However, the data is not in a format that allows reading this file in again through the GridIn class. This is because every vertex of the mesh is duplicated as many times as there are adjacent cells. In other words, every cell has its own, separate set of vertices that are at the same location as the vertices of other cells, but are separately numbered. If such a file is read in through the GridIn class, then that will result in a mesh that has the correct cells and vertex locations, but because the vertices are logically separate (though at the same locations) all cells are unconnected and have no neighbors across faces.

Definition at line 2484 of file grid_out.cc.

◆ write_vtu()

template<int dim, int spacedim>

void GridOut::write_vtu	(	const Triangulation< dim, spacedim > &	tria,
		std::ostream &	out
	)		const

Write triangulation in VTU format.

Due to the way this function writes data to the output stream, the resulting output files correspond to a faithful representation of the mesh in that all cells are visible for visualization. However, the data is not in a format that allows reading this file in again through the GridIn class. This is because every vertex of the mesh is duplicated as many times as there are adjacent cells. In other words, every cell has its own, separate set of vertices that are at the same location as the vertices of other cells, but are separately numbered. If such a file is read in through the GridIn class, then that will result in a mesh that has the correct cells and vertex locations, but because the vertices are logically separate (though at the same locations) all cells are unconnected and have no neighbors across faces.

Definition at line 2508 of file grid_out.cc.

◆ write_mesh_per_processor_as_vtu()

template<int dim, int spacedim>

void GridOut::write_mesh_per_processor_as_vtu	(	const Triangulation< dim, spacedim > &	tria,
		const std::string &	filename_without_extension,
		const bool	view_levels = `false`,
		const bool	include_artificial = `false`
	)		const

Write triangulation in VTU format for each processor, and add a .pvtu file for visualization in Visit or Paraview that describes the collection of VTU files as all part of the same simulation. The output is in the form filename_without_extension.proc000*.vtu where * is 0,1,...,n_proc-1 and filename_without_extension.pvtu. The input view_levels can be set as true to view each level of a multilevel method. The input include_artificial can be set as true to view the artificial cells for each processor. Each .vtu and .pvtu file will have the attributes subdomain, level_subdomain, level, and proc_writing. The level value can be used to separate the image into the view of the grid on each level of a multilevel method and the proc_writing value can be used to separate the image into each processor's owned and ghost cells. This is accomplished by applying the "warp by scalar" filter in paraview to each of the values. After opening the .pvtu file of a mesh where the input view_levels is set to true, select the "warp by scalar" filter. For the "Scalars" input select proc_writing and for the "Normal" input enter in 1 0 0, then click Apply. Next select the "warp by scalar" filter again. For the "Scalars" input select level and for the "Normal" input enter in 0 1 0, then click Apply. This will give you the following image.

If the view_levels remains at false, thereby only giving the mesh for the active level, it is enough to separate the image into the views written by different processors. This is shown in the following image where the include_artificial input is set as true.

Note: Depending on the size of the mesh you may need to increase the "Scale Factor" input so that each piece does not overlap.

Definition at line 2532 of file grid_out.cc.

◆ write() [1/2]

template<int dim, int spacedim>

void GridOut::write	(	const Triangulation< dim, spacedim > &	tria,
		std::ostream &	out,
		const OutputFormat	output_format,
		const Mapping< dim, spacedim > *	mapping = `nullptr`
	)		const

Write grid to out according to the given data format. This function simply calls the appropriate write_* function.

Definition at line 4036 of file grid_out.cc.

◆ write() [2/2]

template<int dim, int spacedim>

void GridOut::write	(	const Triangulation< dim, spacedim > &	tria,
		std::ostream &	out,
		const Mapping< dim, spacedim > *	mapping = `nullptr`
	)		const

Write mesh in default format set by ParameterHandler.

Definition at line 4092 of file grid_out.cc.

◆ set_flags() [1/12]

void GridOut::set_flags ( const GridOutFlags::DX & flags )

Set flags for DX output

Definition at line 408 of file grid_out.cc.

◆ set_flags() [2/12]

void GridOut::set_flags ( const GridOutFlags::Msh & flags )

Set flags for Gmsh output

Definition at line 415 of file grid_out.cc.

◆ set_flags() [3/12]

void GridOut::set_flags ( const GridOutFlags::Ucd & flags )

Set flags for UCD output

Definition at line 421 of file grid_out.cc.

◆ set_flags() [4/12]

void GridOut::set_flags ( const GridOutFlags::Gnuplot & flags )

Set flags for GNUPLOT output

Definition at line 428 of file grid_out.cc.

◆ set_flags() [5/12]

void GridOut::set_flags ( const GridOutFlags::Eps< 1 > & flags )

Set flags for EPS output of a one-dimensional triangulation

Definition at line 435 of file grid_out.cc.

◆ set_flags() [6/12]

void GridOut::set_flags ( const GridOutFlags::Eps< 2 > & flags )

Set flags for EPS output of a two-dimensional triangulation

Definition at line 442 of file grid_out.cc.

◆ set_flags() [7/12]

void GridOut::set_flags ( const GridOutFlags::Eps< 3 > & flags )

Set flags for EPS output of a three-dimensional triangulation

Definition at line 449 of file grid_out.cc.

◆ set_flags() [8/12]

void GridOut::set_flags ( const GridOutFlags::XFig & flags )

Set flags for EPS output of a three-dimensional triangulation

Definition at line 456 of file grid_out.cc.

◆ set_flags() [9/12]

void GridOut::set_flags ( const GridOutFlags::Svg & flags )

Set flags for SVG output

Definition at line 462 of file grid_out.cc.

◆ set_flags() [10/12]

void GridOut::set_flags ( const GridOutFlags::MathGL & flags )

Set flags for MathGL output

Definition at line 468 of file grid_out.cc.

◆ set_flags() [11/12]

void GridOut::set_flags ( const GridOutFlags::Vtk & flags )

Set flags for VTK output

Definition at line 473 of file grid_out.cc.

◆ set_flags() [12/12]

void GridOut::set_flags ( const GridOutFlags::Vtu & flags )

Set flags for VTU output

Definition at line 478 of file grid_out.cc.

◆ default_suffix() [1/2]

std::string GridOut::default_suffix ( const OutputFormat output_format )

static

Provide a function that can tell us which suffix a given output format usually has. For example, it defines the following mappings:

OpenDX: .dx
gnuplot: .gnuplot
ucd: .inp
eps: .eps.

Similar mappings are provided for all implemented formats.

Since this function does not need data from this object, it is static and can thus be called without creating an object of this class.

Definition at line 484 of file grid_out.cc.

◆ default_suffix() [2/2]

std::string GridOut::default_suffix ( ) const

Default suffix for the default output format selected through ParameterHandler.

Definition at line 519 of file grid_out.cc.

◆ parse_output_format()

GridOut::OutputFormat GridOut::parse_output_format ( const std::string & format_name )

static

Return the OutputFormat value corresponding to the given string. If the string does not match any known format, an exception is thrown.

Since this function does not need data from this object, it is static and can thus be called without creating an object of this class. Its main purpose is to allow a program to use any implemented output format without the need to extend the program's parser each time a new format is implemented.

To get a list of presently available format names, e.g. to give it to the ParameterHandler class, use the function get_output_format_names().

Definition at line 527 of file grid_out.cc.

◆ get_output_format_names()

std::string GridOut::get_output_format_names ( )

static

Return a list of implemented output formats. The different names are separated by vertical bar signs (‘|’) as used by the ParameterHandler classes.

Definition at line 569 of file grid_out.cc.

◆ declare_parameters()

void GridOut::declare_parameters ( ParameterHandler & param )

static

Declare parameters in ParameterHandler.

Definition at line 576 of file grid_out.cc.

◆ parse_parameters()

void GridOut::parse_parameters ( ParameterHandler & param )

Parse parameters of ParameterHandler.

Definition at line 624 of file grid_out.cc.

◆ memory_consumption()

std::size_t GridOut::memory_consumption ( ) const

Determine an estimate for the memory consumption (in bytes) of this object.

Definition at line 670 of file grid_out.cc.

◆ write_msh_faces() [1/3]

template<int dim, int spacedim>

unsigned int GridOut::write_msh_faces	(	const Triangulation< dim, spacedim > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Write the grid information about faces to out. Only those faces are printed which are on the boundary and which have a boundary indicator not equal to zero, since the latter is the default for boundary faces.

Since, in Gmsh, geometric elements are continuously numbered, this function requires a parameter next_element_index providing the next geometric element number. This index should have a numerical value equal to one more than the index previously used to write a geometric element to out.

Returns: The next unused geometric element index.

Warning: next_element_index should be (at least) one larger than the current number of triangulation elements (lines, cells, faces) that have been written to out. Gmsh will not load the saved file correctly if there are repeated indices.

This function unfortunately can not be included in the regular write_msh function, since it needs special treatment for the case dim==1, in which case the face iterators are void*'s and lack the member functions which are called. We would not actually call these functions, but the compiler would complain anyway when compiling the function for dim==1. Bad luck.

Definition at line 2827 of file grid_out.cc.

◆ write_msh_faces() [2/3]

unsigned int GridOut::write_msh_faces	(	const Triangulation< 1, 1 > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Declaration of the specialization of above function for 1d. Does nothing.

Definition at line 2755 of file grid_out.cc.

◆ write_msh_faces() [3/3]

unsigned int GridOut::write_msh_faces	(	const Triangulation< 1, 2 > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Declaration of the specialization of above function for 1d, 2sd. Does nothing.

Definition at line 2764 of file grid_out.cc.

◆ write_msh_lines() [1/5]

template<int dim, int spacedim>

unsigned int GridOut::write_msh_lines	(	const Triangulation< dim, spacedim > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Write the grid information about lines to out. Only those lines are printed which are on the boundary and which have a boundary indicator not equal to zero, since the latter is the default for boundary faces.

Since, in Gmsh, geometric elements are continuously numbered, this function requires a parameter next_element_index providing the next geometric element number. This index should have a numerical value equal to one more than the index previously used to write a geometric element to out.

Returns: The next unused geometric element index.

Warning: next_element_index should be (at least) one larger than the current number of triangulation elements (lines, cells, faces) that have been written to out. Gmsh will not load the saved file correctly if there are repeated indices.

This function unfortunately can not be included in the regular write_msh function, since it needs special treatment for the case dim==1 and dim==2, in which case the edge iterators are void*'s and lack the member functions which are called. We would not actually call these functions, but the compiler would complain anyway when compiling the function for dim==1/2. Bad luck.

Definition at line 2869 of file grid_out.cc.

◆ write_msh_lines() [2/5]

unsigned int GridOut::write_msh_lines	(	const Triangulation< 1, 1 > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Declaration of the specialization of above function for 1d. Does nothing.

Definition at line 2781 of file grid_out.cc.

◆ write_msh_lines() [3/5]

unsigned int GridOut::write_msh_lines	(	const Triangulation< 1, 2 > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Declaration of the specialization of above function for 1d, 2sd. Does nothing.

Definition at line 2789 of file grid_out.cc.

◆ write_msh_lines() [4/5]

unsigned int GridOut::write_msh_lines	(	const Triangulation< 2, 2 > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Declaration of the specialization of above function for 2d. Does nothing.

◆ write_msh_lines() [5/5]

unsigned int GridOut::write_msh_lines	(	const Triangulation< 2, 3 > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Declaration of the specialization of above function for 2d, 3sd. Does nothing.

Definition at line 2815 of file grid_out.cc.

◆ write_ucd_faces() [1/3]

template<int dim, int spacedim>

unsigned int GridOut::write_ucd_faces	(	const Triangulation< dim, spacedim > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Write the grid information about faces to out. Only those faces are printed which are on the boundary and which have a boundary indicator not equal to zero, since the latter is the default for boundary faces.

Since (in the UCD format) geometric elements are continuously numbered, this function requires a parameter next_element_index providing the next geometric element number. This index should have a numerical value equal to one more than the index previously used to write a geometric element to out.

Returns: The next unused geometric element index.

Warning: next_element_index should be (at least) one larger than the current number of triangulation elements (lines, cells, faces) that have been written to out. Visualization programs may not load the saved file correctly if there are repeated indices.

This function unfortunately can not be included in the regular write_ucd function, since it needs special treatment for the case dim==1, in which case the face iterators are void*'s and lack the member functions which are called. We would not actually call these functions, but the compiler would complain anyway when compiling the function for dim==1. Bad luck.

Definition at line 2994 of file grid_out.cc.

◆ write_ucd_faces() [2/3]

unsigned int GridOut::write_ucd_faces	(	const Triangulation< 1, 1 > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Declaration of the specialization of above function for 1d. Does nothing.

Definition at line 2925 of file grid_out.cc.

◆ write_ucd_faces() [3/3]

unsigned int GridOut::write_ucd_faces	(	const Triangulation< 1, 2 > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Declaration of the specialization of above function for 1d, 2sd. Does nothing.

Definition at line 2933 of file grid_out.cc.

◆ write_ucd_lines() [1/5]

template<int dim, int spacedim>

unsigned int GridOut::write_ucd_lines	(	const Triangulation< dim, spacedim > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Write the grid information about lines to out. Only those lines are printed which are on the boundary and which have a boundary indicator not equal to zero, since the latter is the default for boundary lines.

Since (in the UCD format) geometric elements are continuously numbered, this function requires a parameter next_element_index providing the next geometric element number. This index should have a numerical value equal to one more than the index previously used to write a geometric element to out.

Returns: The next unused geometric element index.

Warning: next_element_index should be (at least) one larger than the current number of triangulation elements (lines, cells, faces) that have been written to out. Visualization programs may not load the saved file correctly if there are repeated indices.

This function unfortunately can not be included in the regular write_ucd function, since it needs special treatment for the case dim==1/2, in which case the edge iterators are void*'s and lack the member functions which are called. We would not actually call these functions, but the compiler would complain anyway when compiling the function for dim==1/2. Bad luck.

Definition at line 3034 of file grid_out.cc.

◆ write_ucd_lines() [2/5]

unsigned int GridOut::write_ucd_lines	(	const Triangulation< 1, 1 > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Declaration of the specialization of above function for 1d. Does nothing.

Definition at line 2949 of file grid_out.cc.

◆ write_ucd_lines() [3/5]

unsigned int GridOut::write_ucd_lines	(	const Triangulation< 1, 2 > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Declaration of the specialization of above function for 1d, 2sd. Does nothing.

Definition at line 2957 of file grid_out.cc.

◆ write_ucd_lines() [4/5]

unsigned int GridOut::write_ucd_lines	(	const Triangulation< 2, 2 > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Declaration of the specialization of above function for 2d. Does nothing.

◆ write_ucd_lines() [5/5]

unsigned int GridOut::write_ucd_lines	(	const Triangulation< 2, 3 > &	tria,
		const unsigned int	next_element_index,
		std::ostream &	out
	)		const

private

Declaration of the specialization of above function for 2d, 3sd. Does nothing.

Definition at line 2983 of file grid_out.cc.

◆ svg_project_point()

Point< 2 > GridOut::svg_project_point	(	Point< 3 >	point,
		Point< 3 >	camera_position,
		Point< 3 >	camera_direction,
		Point< 3 >	camera_horizontal,
		float	camera_focus
	)

staticprivate

This function projects a three-dimensional point (Point<3> point) onto a two-dimensional image plane, specified by the position of the camera viewing system (Point<3> camera_position), camera direction (Point<3> camera_position), camera horizontal (Point<3> camera_horizontal, necessary for the correct alignment of the later images), and the focus of the camera (float camera_focus).

For SVG output of grids.

Definition at line 3084 of file grid_out.cc.

◆ n_boundary_faces() [1/3]

template<int dim, int spacedim>

unsigned int GridOut::n_boundary_faces ( const Triangulation< dim, spacedim > & tria ) const

private

Return the number of faces in the triangulation which have a boundary indicator not equal to zero. Only these faces are explicitly printed in the write_* functions; all faces with indicator numbers::internal_face_boundary_id are interior ones and an indicator with value zero for faces at the boundary are considered default.

This function always returns an empty list in one dimension.

The reason for this function is the same as for write_ucd_faces(). See there for more information.

Definition at line 2698 of file grid_out.cc.

◆ n_boundary_faces() [2/3]

unsigned int GridOut::n_boundary_faces ( const Triangulation< 1, 1 > & tria ) const

private

Declaration of the specialization of above function for 1d. Simply returns zero.

◆ n_boundary_faces() [3/3]

unsigned int GridOut::n_boundary_faces ( const Triangulation< 1, 2 > & tria ) const

private

Declaration of the specialization of above function for 1d, 2sd. Simply returns zero.

Definition at line 2665 of file grid_out.cc.

◆ n_boundary_lines() [1/5]

template<int dim, int spacedim>

unsigned int GridOut::n_boundary_lines ( const Triangulation< dim, spacedim > & tria ) const

private

Return the number of lines in the triangulation which have a boundary indicator not equal to zero. Only these lines are explicitly printed in the write_* functions; all lines with indicator numbers::internal_face_boundary_id are interior ones and an indicator with value zero for faces at the boundary are considered default.

This function always returns an empty list in one and two dimensions.

The reason for this function is the same as for write_ucd_faces(). See there for more information.

Definition at line 2715 of file grid_out.cc.

◆ n_boundary_lines() [2/5]

unsigned int GridOut::n_boundary_lines ( const Triangulation< 1, 1 > & tria ) const

private

Declaration of the specialization of above function for 1d. Simply returns zero.

◆ n_boundary_lines() [3/5]

unsigned int GridOut::n_boundary_lines ( const Triangulation< 1, 2 > & tria ) const

private

Declaration of the specialization of above function for 1d, 2sd. Simply returns zero.

Definition at line 2670 of file grid_out.cc.

◆ n_boundary_lines() [4/5]

unsigned int GridOut::n_boundary_lines ( const Triangulation< 2, 2 > & tria ) const

private

Declaration of the specialization of above function for 2d. Simply returns zero.

Definition at line 2685 of file grid_out.cc.

◆ n_boundary_lines() [5/5]

unsigned int GridOut::n_boundary_lines ( const Triangulation< 2, 3 > & tria ) const

private

Declaration of the specialization of above function for 2d, 3sd. Simply returns zero.

Definition at line 2690 of file grid_out.cc.

Member Data Documentation

◆ default_format

OutputFormat GridOut::default_format

private

The default output format, set by a ParameterHandler.

Definition at line 1298 of file grid_out.h.

◆ dx_flags

GridOutFlags::DX GridOut::dx_flags

private

Flags for OpenDX output.

Definition at line 1303 of file grid_out.h.

◆ msh_flags

GridOutFlags::Msh GridOut::msh_flags

private

Flags for Gmsh output. Can be changed by using the set_flags(const GridOutFlags::Msh&) function.

Definition at line 1309 of file grid_out.h.

◆ ucd_flags

GridOutFlags::Ucd GridOut::ucd_flags

private

Flags for UCD output. Can be changed by using the set_flags(const GridOutFlags::Ucd&) function.

Definition at line 1315 of file grid_out.h.

◆ gnuplot_flags

GridOutFlags::Gnuplot GridOut::gnuplot_flags

private

Flags to be used upon output of GNUPLOT data. Can be changed by using the set_flags(const GridOutFlags::Gnuplot&) function.

Definition at line 1321 of file grid_out.h.

◆ eps_flags_1

GridOutFlags::Eps<1> GridOut::eps_flags_1

private

Flags to be used upon output of EPS data in one space dimension. Can be changed by using the set_flags(const GridOutFlags::Eps<1>&) function.

Definition at line 1327 of file grid_out.h.

◆ eps_flags_2

GridOutFlags::Eps<2> GridOut::eps_flags_2

private

Flags to be used upon output of EPS data in two space dimensions. Can be changed by using the set_flags function.

Definition at line 1333 of file grid_out.h.

◆ eps_flags_3

GridOutFlags::Eps<3> GridOut::eps_flags_3

private

Flags to be used upon output of EPS data in three space dimensions. Can be changed by using the set_flags function.

Definition at line 1339 of file grid_out.h.

◆ xfig_flags

GridOutFlags::XFig GridOut::xfig_flags

private

Flags used for XFig output.

Definition at line 1344 of file grid_out.h.

◆ svg_flags

GridOutFlags::Svg GridOut::svg_flags

private

Flags used for Svg output.

Definition at line 1349 of file grid_out.h.

◆ mathgl_flags

GridOutFlags::MathGL GridOut::mathgl_flags

private

Flags for MathGL output.

Definition at line 1354 of file grid_out.h.

◆ vtk_flags

GridOutFlags::Vtk GridOut::vtk_flags

private

Flags for VTK output.

Definition at line 1359 of file grid_out.h.

◆ vtu_flags

GridOutFlags::Vtu GridOut::vtu_flags

private

Flags for VTU output.

Definition at line 1364 of file grid_out.h.

The documentation for this class was generated from the following files:

deal.II/grid/grid_out.h
source/grid/grid_out.cc

Private Attributes
OutputFormat	default_format

GridOutFlags::DX	dx_flags

GridOutFlags::Msh	msh_flags

GridOutFlags::Ucd	ucd_flags

GridOutFlags::Gnuplot	gnuplot_flags

GridOutFlags::Eps< 1 >	eps_flags_1

GridOutFlags::Eps< 2 >	eps_flags_2

GridOutFlags::Eps< 3 >	eps_flags_3

GridOutFlags::XFig	xfig_flags

GridOutFlags::Svg	svg_flags

GridOutFlags::MathGL	mathgl_flags

GridOutFlags::Vtk	vtk_flags

GridOutFlags::Vtu	vtu_flags

Public Types

Public Member Functions

Static Public Member Functions

Private Member Functions

Static Private Member Functions

Private Attributes

Detailed Description

Member Enumeration Documentation

◆ OutputFormat

Constructor & Destructor Documentation

◆ GridOut()

Member Function Documentation

◆ write_dx()

◆ write_gnuplot()

◆ write_msh()

◆ write_ucd()

◆ write_eps()

◆ write_xfig()

◆ write_svg() [1/2]

◆ write_svg() [2/2]

◆ write_mathgl()

◆ write_vtk()

◆ write_vtu()

◆ write_mesh_per_processor_as_vtu()

◆ write() [1/2]

◆ write() [2/2]

◆ set_flags() [1/12]

◆ set_flags() [2/12]

◆ set_flags() [3/12]

◆ set_flags() [4/12]

◆ set_flags() [5/12]

◆ set_flags() [6/12]

◆ set_flags() [7/12]

◆ set_flags() [8/12]

◆ set_flags() [9/12]

◆ set_flags() [10/12]

◆ set_flags() [11/12]

◆ set_flags() [12/12]

◆ default_suffix() [1/2]

◆ default_suffix() [2/2]

◆ parse_output_format()

◆ get_output_format_names()

◆ declare_parameters()

◆ parse_parameters()

◆ memory_consumption()

◆ write_msh_faces() [1/3]

◆ write_msh_faces() [2/3]

◆ write_msh_faces() [3/3]

◆ write_msh_lines() [1/5]

◆ write_msh_lines() [2/5]

◆ write_msh_lines() [3/5]

◆ write_msh_lines() [4/5]

◆ write_msh_lines() [5/5]

◆ write_ucd_faces() [1/3]

◆ write_ucd_faces() [2/3]

◆ write_ucd_faces() [3/3]

◆ write_ucd_lines() [1/5]

◆ write_ucd_lines() [2/5]

◆ write_ucd_lines() [3/5]

◆ write_ucd_lines() [4/5]

◆ write_ucd_lines() [5/5]

◆ svg_project_point()

◆ n_boundary_faces() [1/3]

◆ n_boundary_faces() [2/3]

◆ n_boundary_faces() [3/3]

◆ n_boundary_lines() [1/5]

◆ n_boundary_lines() [2/5]

◆ n_boundary_lines() [3/5]

◆ n_boundary_lines() [4/5]

◆ n_boundary_lines() [5/5]

Member Data Documentation

◆ default_format

◆ dx_flags

◆ msh_flags

◆ ucd_flags

◆ gnuplot_flags

◆ eps_flags_1

◆ eps_flags_2

◆ eps_flags_3

◆ xfig_flags