#include <deal.II/dofs/dof_handler.h>

Inheritance diagram for DoFHandler< dim, spacedim >:

Classes
class	MGVertexDoFs

Public Types
typedef ActiveSelector::active_cell_iterator	active_cell_iterator

typedef ActiveSelector::cell_iterator	cell_iterator

typedef ActiveSelector::face_iterator	face_iterator

typedef ActiveSelector::active_face_iterator	active_face_iterator

Public Member Functions
	DoFHandler ()

	DoFHandler (const Triangulation< dim, spacedim > &tria)

	DoFHandler (const DoFHandler &)=delete

virtual	~DoFHandler ()

DoFHandler &	operator= (const DoFHandler &)=delete

void	initialize (const Triangulation< dim, spacedim > &tria, const FiniteElement< dim, spacedim > &fe)

virtual void	distribute_dofs (const FiniteElement< dim, spacedim > &fe)

virtual void	distribute_mg_dofs (const FiniteElement< dim, spacedim > &fe)

virtual void	distribute_mg_dofs ()

bool	has_level_dofs () const

bool	has_active_dofs () const

void	initialize_local_block_info ()

virtual void	clear ()

void	renumber_dofs (const std::vector< types::global_dof_index > &new_numbers)

void	renumber_dofs (const unsigned int level, const std::vector< types::global_dof_index > &new_numbers)

unsigned int	max_couplings_between_dofs () const

unsigned int	max_couplings_between_boundary_dofs () const

Cell iterator functions
cell_iterator	begin (const unsigned int level=0) const

active_cell_iterator	begin_active (const unsigned int level=0) const

cell_iterator	end () const

cell_iterator	end (const unsigned int level) const

active_cell_iterator	end_active (const unsigned int level) const

level_cell_iterator	begin_mg (const unsigned int level=0) const

level_cell_iterator	end_mg (const unsigned int level) const

level_cell_iterator	end_mg () const

Public Member Functions inherited from Subscriptor
	Subscriptor ()

	Subscriptor (const Subscriptor &)

	Subscriptor (Subscriptor &&) noexcept

virtual	~Subscriptor ()

Subscriptor &	operator= (const Subscriptor &)

Subscriptor &	operator= (Subscriptor &&) noexcept

void	subscribe (const char *identifier=nullptr) const

void	unsubscribe (const char *identifier=nullptr) const

unsigned int	n_subscriptions () const

void	list_subscribers () const

template<class Archive >
void	serialize (Archive &ar, const unsigned int version)

Static Public Attributes
static const unsigned int	dimension = dim

static const unsigned int	space_dimension = spacedim

static const types::global_dof_index	invalid_dof_index = numbers::invalid_dof_index

static const unsigned int	default_fe_index = 0

Related Functions
(Note that these are not member functions.)
Functions to support code that generically uses both DoFHandler and hp::DoFHandler
template<int dim, int spacedim>
unsigned int	max_dofs_per_cell (const DoFHandler< dim, spacedim > &dh)

template<int dim, int spacedim>
unsigned int	max_dofs_per_face (const DoFHandler< dim, spacedim > &dh)

template<int dim, int spacedim>
unsigned int	max_dofs_per_vertex (const DoFHandler< dim, spacedim > &dh)

template<int dim, int spacedim>
unsigned int	n_components (const DoFHandler< dim, spacedim > &dh)

template<int dim, int spacedim>
bool	fe_is_primitive (const DoFHandler< dim, spacedim > &dh)

Cell iterator functions returning ranges of iterators
BlockInfo	block_info_object

SmartPointer< const Triangulation< dim, spacedim >, DoFHandler< dim, spacedim > >	tria

hp::FECollection< dim, spacedim >	fe_collection

std::unique_ptr<::internal::DoFHandlerImplementation::Policy::PolicyBase< dim, spacedim > >	policy

::internal::DoFHandlerImplementation::NumberCache	number_cache

std::vector<::internal::DoFHandlerImplementation::NumberCache >	mg_number_cache

std::vector< types::global_dof_index >	vertex_dofs

std::vector< MGVertexDoFs >	mg_vertex_dofs

std::vector< std::unique_ptr<::internal::DoFHandlerImplementation::DoFLevel< dim > > >	levels

std::vector< std::unique_ptr<::internal::DoFHandlerImplementation::DoFLevel< dim > > >	mg_levels

std::unique_ptr<::internal::DoFHandlerImplementation::DoFFaces< dim > >	faces

std::unique_ptr<::internal::DoFHandlerImplementation::DoFFaces< dim > >	mg_faces

template<int , class , bool >
class	DoFAccessor

template<class , bool >
class	DoFCellAccessor

struct	::internal::DoFAccessorImplementation::Implementation

struct	::internal::DoFCellAccessorImplementation::Implementation

struct	::internal::DoFHandlerImplementation::Implementation

struct	::internal::DoFHandlerImplementation::Policy::Implementation

IteratorRange< cell_iterator >	cell_iterators () const

IteratorRange< active_cell_iterator >	active_cell_iterators () const

IteratorRange< level_cell_iterator >	mg_cell_iterators () const

IteratorRange< cell_iterator >	cell_iterators_on_level (const unsigned int level) const

IteratorRange< active_cell_iterator >	active_cell_iterators_on_level (const unsigned int level) const

IteratorRange< level_cell_iterator >	mg_cell_iterators_on_level (const unsigned int level) const

types::global_dof_index	n_dofs () const

types::global_dof_index	n_dofs (const unsigned int level) const

types::global_dof_index	n_boundary_dofs () const

template<typename number >
types::global_dof_index	n_boundary_dofs (const std::map< types::boundary_id, const Function< spacedim, number > *> &boundary_ids) const

types::global_dof_index	n_boundary_dofs (const std::set< types::boundary_id > &boundary_ids) const

const BlockInfo &	block_info () const

unsigned int	n_locally_owned_dofs () const

const IndexSet &	locally_owned_dofs () const

const IndexSet &	locally_owned_mg_dofs (const unsigned int level) const

const std::vector< IndexSet > &	locally_owned_dofs_per_processor () const

const std::vector< types::global_dof_index > &	n_locally_owned_dofs_per_processor () const

const std::vector< IndexSet > &	locally_owned_mg_dofs_per_processor (const unsigned int level) const

const FiniteElement< dim, spacedim > &	get_fe (const unsigned int index=0) const

const hp::FECollection< dim, spacedim > &	get_fe_collection () const

const Triangulation< dim, spacedim > &	get_triangulation () const

virtual std::size_t	memory_consumption () const

template<class Archive >
void	save (Archive &ar, const unsigned int version) const

template<class Archive >
void	load (Archive &ar, const unsigned int version)

static ::ExceptionBase &	ExcGridsDoNotMatch ()

static ::ExceptionBase &	ExcInvalidBoundaryIndicator ()

static ::ExceptionBase &	ExcNewNumbersNotConsecutive (types::global_dof_index arg1)

static ::ExceptionBase &	ExcInvalidLevel (int arg1)

static ::ExceptionBase &	ExcFacesHaveNoLevel ()

static ::ExceptionBase &	ExcEmptyLevel (int arg1)

void	clear_space ()

void	clear_mg_space ()

template<int structdim>
types::global_dof_index	get_dof_index (const unsigned int obj_level, const unsigned int obj_index, const unsigned int fe_index, const unsigned int local_index) const

template<int structdim>
void	set_dof_index (const unsigned int obj_level, const unsigned int obj_index, const unsigned int fe_index, const unsigned int local_index, const types::global_dof_index global_index) const

Additional Inherited Members
Static Public Member Functions inherited from Subscriptor
static ::ExceptionBase &	ExcInUse (int arg1, std::string arg2, std::string arg3)

static ::ExceptionBase &	ExcNoSubscriber (std::string arg1, std::string arg2)

Detailed Description

template<int dim, int spacedim = dim>
class DoFHandler< dim, spacedim >

Given a triangulation and a description of a finite element, this class enumerates degrees of freedom on all vertices, edges, faces, and cells of the triangulation. As a result, it also provides a basis for a discrete space \(V_h\) whose elements are finite element functions defined on each cell by a FiniteElement object. This class satisfies the MeshType concept requirements.

It is first used in the step-2 tutorial program.

For each vertex, line, quad, etc, this class stores a list of the indices of degrees of freedom living on this object. These indices refer to the unconstrained degrees of freedom, i.e. constrained degrees of freedom are numbered in the same way as unconstrained ones, and are only later eliminated. This leads to the fact that indices in global vectors and matrices also refer to all degrees of freedom and some kind of condensation is needed to restrict the systems of equations to the unconstrained degrees of freedom only. The actual layout of storage of the indices is described in the internal::DoFHandlerImplementation::DoFLevel class documentation.

The class offers iterators to traverse all cells, in much the same way as the Triangulation class does. Using the begin() and end() functions (and companions, like begin_active()), one can obtain iterators to walk over cells, and query the degree of freedom structures as well as the triangulation data. These iterators are built on top of those of the Triangulation class, but offer the additional information on degrees of freedom functionality compared to pure triangulation iterators. The order in which dof iterators are presented by the ++ and – operators is the same as that for the corresponding iterators traversing the triangulation on which this DoFHandler is constructed.

The spacedim parameter has to be used if one wants to solve problems on surfaces. If not specified, this parameter takes the default value =dim implying that we want to solve problems in a domain whose dimension equals the dimension of the space in which it is embedded.

Distribution of indices for degrees of freedom

The degrees of freedom (‘dofs’) are distributed on the given triangulation by the function distribute_dofs(). It gets passed a finite element object describing how many degrees of freedom are located on vertices, lines, etc. It traverses the triangulation cell by cell and numbers the dofs of that cell if not yet numbered. For non-multigrid algorithms, only active cells are considered. Active cells are defined to be those cells which have no children, i.e. they are the most refined ones.

Since the triangulation is traversed starting with the cells of the coarsest active level and going to more refined levels, the lowest numbers for dofs are given to the largest cells as well as their bounding lines and vertices, with the dofs of more refined cells getting higher numbers.

This numbering implies very large bandwidths of the resulting matrices and is thus vastly suboptimal for some solution algorithms. For this reason, the DoFRenumbering class offers several algorithms to reorder the dof numbering according. See there for a discussion of the implemented algorithms.

Interaction with distributed meshes

Upon construction, this class takes a reference to a triangulation object. In most cases, this will be a reference to an object of type Triangulation, i.e. the class that represents triangulations that entirely reside on a single processor. However, it can also be of type parallel::distributed::Triangulation (see, for example, step-32, step-40 and in particular the Parallel computing with multiple processors using distributed memory module) in which case the DoFHandler object will proceed to only manage degrees of freedom on locally owned and ghost cells. This process is entirely transparent to the used.

User defined renumbering schemes

The DoFRenumbering class offers a number of renumbering schemes like the Cuthill-McKee scheme. Basically, the function sets up an array in which for each degree of freedom we store the new index this DoF should have after renumbering. Using this array, the renumber_dofs() function of the present class is called, which actually performs the change from old DoF indices to the ones given in the array. In some cases, however, a user may want to compute her own renumbering order; in this case, one can allocate an array with one element per degree of freedom and fill it with the number that the respective degree of freedom shall be assigned. This number may, for example, be obtained by sorting the support points of the degrees of freedom in downwind direction. Then call the renumber_dofs(vector<types::global_dof_index>) function with the array, which converts old into new degree of freedom indices.

Serializing (loading or storing) DoFHandler objects

Like many other classes in deal.II, the DoFHandler class can stream its contents to an archive using BOOST's serialization facilities. The data so stored can later be retrieved again from the archive to restore the contents of this object. This facility is frequently used to save the state of a program to disk for possible later resurrection, often in the context of checkpoint/restart strategies for long running computations or on computers that aren't very reliable (e.g. on very large clusters where individual nodes occasionally fail and then bring down an entire MPI job).

The model for doing so is similar for the DoFHandler class as it is for the Triangulation class (see the section in the general documentation of that class). In particular, the load() function does not exactly restore the same state as was stored previously using the save() function. Rather, the function assumes that you load data into a DoFHandler object that is already associated with a triangulation that has a content that matches the one that was used when the data was saved. Likewise, the load() function assumes that the current object is already associated with a finite element object that matches the one that was associated with it when data was saved; the latter can be achieved by calling DoFHandler::distribute_dofs() using the same kind of finite element before re-loading data from the serialization archive.

Author: Wolfgang Bangerth, Markus Buerg, Timo Heister, Guido Kanschat,

Date: 1998, 1999, 2000, 2012

Definition at line 29 of file block_info.h.

Constructor & Destructor Documentation

◆ DoFHandler() [1/3]

template<int dim, int spacedim>

DoFHandler< dim, spacedim >::DoFHandler ( )

Standard constructor, not initializing any data. After constructing an object with this constructor, use initialize() to make a valid DoFHandler.

Definition at line 674 of file dof_handler.cc.

◆ DoFHandler() [2/3]

template<int dim, int spacedim>

DoFHandler< dim, spacedim >::DoFHandler ( const Triangulation< dim, spacedim > & tria )

Constructor. Take tria as the triangulation to work on.

Definition at line 653 of file dof_handler.cc.

◆ DoFHandler() [3/3]

template<int dim, int spacedim = dim>

DoFHandler< dim, spacedim >::DoFHandler ( const DoFHandler< dim, spacedim > & )

delete

Copy constructor. DoFHandler objects are large and expensive. They should not be copied, in particular not by accident, but rather deliberately constructed. As a consequence, this constructor is explicitly removed from the interface of this class.

◆ ~DoFHandler()

template<int dim, int spacedim>

DoFHandler< dim, spacedim >::~DoFHandler ( )

virtual

Destructor.

Definition at line 681 of file dof_handler.cc.

Member Function Documentation

◆ operator=()

template<int dim, int spacedim = dim>

DoFHandler& DoFHandler< dim, spacedim >::operator= ( const DoFHandler< dim, spacedim > & )

delete

Copy operator. DoFHandler objects are large and expensive. They should not be copied, in particular not by accident, but rather deliberately constructed. As a consequence, this operator is explicitly removed from the interface of this class.

◆ initialize()

template<int dim, int spacedim>

void DoFHandler< dim, spacedim >::initialize	(	const Triangulation< dim, spacedim > &	tria,
		const FiniteElement< dim, spacedim > &	fe
	)

Assign a Triangulation and a FiniteElement to the DoFHandler and compute the distribution of degrees of freedom over the mesh.

Definition at line 699 of file dof_handler.cc.

◆ distribute_dofs()

template<int dim, int spacedim>

void DoFHandler< dim, spacedim >::distribute_dofs ( const FiniteElement< dim, spacedim > & fe )

virtual

Go through the triangulation and "distribute" the degrees of freedoms needed for the given finite element. "Distributing" degrees of freedom involves allocating memory to store the indices on all entities on which degrees of freedom can be located (e.g., vertices, edges, faces, etc.) and to then enumerate all degrees of freedom. In other words, while the mesh and the finite element object by themselves simply define a finite element space \(V_h\), the process of distributing degrees of freedom makes sure that there is a basis for this space and that the shape functions of this basis are enumerated in an indexable, predictable way.

The exact order in which degrees of freedom on a mesh are ordered, i.e., the order in which basis functions of the finite element space are enumerated, is something that deal.II treats as an implementation detail. By and large, degrees of freedom are enumerated in the same order in which we traverse cells, but you should not rely on any specific numbering. In contrast, if you want a particular ordering, use the functions in namespace DoFRenumbering.

This function is first discussed in the introduction to the step-2 tutorial program.

Note: This function makes a copy of the finite element given as argument, and stores it as a member variable. Consequently, it is possible to write code such as
dof_handler.distribute_dofs (FE_Q<dim>(2));
You can then access the finite element later on by calling DoFHandler::get_fe(). However, it is often more convenient to keep a named finite element object as a member variable in your main class and refer to it directly whenever you need to access properties of the finite element (such as FiniteElement::dofs_per_cell). This is what all tutorial programs do.

Definition at line 993 of file dof_handler.cc.

◆ distribute_mg_dofs() [1/2]

template<int dim, int spacedim>

void DoFHandler< dim, spacedim >::distribute_mg_dofs ( const FiniteElement< dim, spacedim > & fe )

virtual

Distribute level degrees of freedom on each level for geometric multigrid. The active DoFs need to be distributed using distribute_dofs() before calling this function and the fe needs to be identical to the finite element passed to distribute_dofs().

Deprecated:: Use the version without parameter instead.

Definition at line 1039 of file dof_handler.cc.

◆ distribute_mg_dofs() [2/2]

template<int dim, int spacedim>

void DoFHandler< dim, spacedim >::distribute_mg_dofs ( )

virtual

Distribute level degrees of freedom on each level for geometric multigrid. The active DoFs need to be distributed using distribute_dofs() before calling this function.

Definition at line 1047 of file dof_handler.cc.

◆ has_level_dofs()

template<int dim, int spacedim = dim>

bool DoFHandler< dim, spacedim >::has_level_dofs ( ) const

This function returns whether this DoFHandler has DoFs distributed on each multigrid level or in other words if distribute_mg_dofs() has been called.

◆ has_active_dofs()

template<int dim, int spacedim = dim>

bool DoFHandler< dim, spacedim >::has_active_dofs ( ) const

This function returns whether this DoFHandler has active DoFs. This is equivalent to asking whether (i) distribute_dofs() has been called and (ii) the finite element for which degrees of freedom have been distributed actually has degrees of freedom (which is not the case for FE_Nothing, for example).

If this object is based on a parallel::distributed::Triangulation, then the current function returns true if any partition of the parallel DoFHandler object has any degrees of freedom. In other words, the function returns true even if the Triangulation does not own any active cells on the current MPI process, but at least one process owns cells and at least this one process has any degrees of freedom associated with it.

◆ initialize_local_block_info()

template<int dim, int spacedim>

void DoFHandler< dim, spacedim >::initialize_local_block_info ( )

After distribute_dofs() with an FESystem element, the block structure of global and level vectors is stored in a BlockInfo object accessible with block_info(). This function initializes the local block structure on each cell in the same object.

Definition at line 1085 of file dof_handler.cc.

◆ clear()

template<int dim, int spacedim>

void DoFHandler< dim, spacedim >::clear ( )

virtual

Clear all data of this object.

Definition at line 1093 of file dof_handler.cc.

◆ renumber_dofs() [1/2]

template<int dim, int spacedim>

void DoFHandler< dim, spacedim >::renumber_dofs ( const std::vector< types::global_dof_index > & new_numbers )

Renumber degrees of freedom based on a list of new DoF indices for each of the degrees of freedom.

This function is called by the functions in DoFRenumbering function after computing a new ordering of the degree of freedom indices. However, it can of course also be called from user code.

new_number This array must have a size equal to the number of degrees of freedom owned by the current processor, i.e. the size must be equal to what n_locally_owned_dofs() returns. If only one processor participates in storing the current mesh, then this equals the total number of degrees of freedom, i.e. the result of n_dofs(). The contents of this array are the new global indices for each freedom listed in the IndexSet returned by locally_owned_dofs(). In the case of a sequential mesh this means that the array is a list of new indices for each of the degrees of freedom on the current mesh. In the case that we have a parallel::shared::Triangulation or parallel::distributed::Triangulation underlying this DoFHandler object, the array is a list of new indices for all the locally owned degrees of freedom, enumerated in the same order as the currently locally owned DoFs. In other words, assume that degree of freedom i is currently locally owned, then new_numbers[locally_owned_dofs().index_within_set(i)] returns the new global DoF index of i. Since the IndexSet of locally_owned_dofs() is complete in the sequential case, the latter convention for the content of the array reduces to the former in the case that only one processor participates in the mesh.

Note: While it follows from the above, it may be surprising to know that the number of locally owned degrees of freedom in a parallel computation is an invariant under renumbering, even if the indices associated with these locally owned degrees of freedom are not. At a fundamental level, this invariant exists because the decision whether a degree of freedom is locally owned or not has nothing to do with that degree of freedom's (old or new) index. Indeed, degrees of freedom are locally owned if they are on a locally owned cell and not on an interface between cells where the neighboring cell has a lower subdomain id. Since both of these conditions are independent of the index associated with the DoF, a locally owned degree of freedom will also be locally owned after renumbering. On the other hand, properties such as whether the set of indices of locally owned DoFs forms a contiguous range or not (i.e., whether the locally_owned_dofs() returns an IndexSet object for which IndexSet::is_contiguous() returns true) are of course affected by the exact renumbering performed here. For example, while the initial numbering of DoF indices done in distribute_dofs() yields a contiguous numbering, the renumbering performed by DoFRenumbering::component_wise() will, in general, not yield contiguous locally owned DoF indices.

Definition at line 1104 of file dof_handler.cc.

◆ renumber_dofs() [2/2]

template<int dim, int spacedim>

void DoFHandler< dim, spacedim >::renumber_dofs	(	const unsigned int	level,
		const std::vector< types::global_dof_index > &	new_numbers
	)

The same function as above, but renumber the degrees of freedom of a single level of a multigrid hierarchy.

Definition at line 1153 of file dof_handler.cc.

◆ max_couplings_between_dofs()

template<int dim, int spacedim>

unsigned int DoFHandler< dim, spacedim >::max_couplings_between_dofs ( ) const

Return the maximum number of degrees of freedom a degree of freedom in the given triangulation with the given finite element may couple with. This is the maximum number of entries per line in the system matrix; this information can therefore be used upon construction of the SparsityPattern object.

The returned number is not really the maximum number but an estimate based on the finite element and the maximum number of cells meeting at a vertex. The number holds for the constrained matrix as well.

The determination of the number of couplings can be done by simple picture drawing. An example can be found in the implementation of this function.

Note: This function is most often used to determine the maximal row length for sparsity patterns. Unfortunately, while the estimates returned by this function are rather accurate in 1d and 2d, they are often significantly too high in 3d, leading the SparsityPattern class to allocate much too much memory in some cases. Unless someone comes around to improving the present function for 3d, there is not very much one can do about these cases. The typical way to work around this problem is to use an intermediate compressed sparsity pattern that only allocates memory on demand. Refer to the step-2 and step-11 example programs on how to do this. The problem is also discussed in the documentation of the module on Sparsity patterns.

Definition at line 1188 of file dof_handler.cc.

◆ max_couplings_between_boundary_dofs()

template<int dim, int spacedim>

unsigned int DoFHandler< dim, spacedim >::max_couplings_between_boundary_dofs ( ) const

Return the number of degrees of freedom located on the boundary another dof on the boundary can couple with.

The number is the same as for max_couplings_between_dofs() in one dimension less.

Note: The same applies to this function as to max_couplings_per_dofs() as regards the performance of this function. Think about one of the dynamic sparsity pattern classes instead (see Sparsity patterns).

Definition at line 1197 of file dof_handler.cc.

◆ begin()

template<int dim, int spacedim>

DoFHandler< dim, spacedim >::cell_iterator DoFHandler< dim, spacedim >::begin ( const unsigned int level = 0 ) const

Iterator to the first used cell on level level.

Definition at line 723 of file dof_handler.cc.

◆ begin_active()

template<int dim, int spacedim>

DoFHandler< dim, spacedim >::active_cell_iterator DoFHandler< dim, spacedim >::begin_active ( const unsigned int level = 0 ) const

Iterator to the first active cell on level level. If the given level does not contain any active cells (i.e., all cells on this level are further refined, then this function returns end_active(level) so that loops of the kind

for (cell=dof_handler.begin_active(level); cell!=dof_handler.end_active(level); ++cell)

...

have zero iterations, as may be expected if there are no active cells on this level.

Definition at line 735 of file dof_handler.cc.

◆ end() [1/2]

template<int dim, int spacedim>

DoFHandler< dim, spacedim >::cell_iterator DoFHandler< dim, spacedim >::end ( ) const

Iterator past the end; this iterator serves for comparisons of iterators with past-the-end or before-the-beginning states.

Definition at line 751 of file dof_handler.cc.

◆ end() [2/2]

template<int dim, int spacedim>

DoFHandler< dim, spacedim >::cell_iterator DoFHandler< dim, spacedim >::end ( const unsigned int level ) const

Return an iterator which is the first iterator not on the given level. If level is the last level, then this returns end().

Definition at line 762 of file dof_handler.cc.

◆ end_active()

template<int dim, int spacedim>

DoFHandler< dim, spacedim >::active_cell_iterator DoFHandler< dim, spacedim >::end_active ( const unsigned int level ) const

Return an active iterator which is the first active iterator not on the given level. If level is the last level, then this returns end().

Definition at line 773 of file dof_handler.cc.

◆ begin_mg()

template<int dim, int spacedim>

DoFHandler< dim, spacedim >::level_cell_iterator DoFHandler< dim, spacedim >::begin_mg ( const unsigned int level = 0 ) const

Iterator to the first used cell on level level. This returns a level_cell_iterator that returns level dofs when dof_indices() is called.

Definition at line 785 of file dof_handler.cc.

◆ end_mg() [1/2]

template<int dim, int spacedim>

DoFHandler< dim, spacedim >::level_cell_iterator DoFHandler< dim, spacedim >::end_mg ( const unsigned int level ) const

Iterator past the last cell on level level. This returns a level_cell_iterator that returns level dofs when dof_indices() is called.

Definition at line 798 of file dof_handler.cc.

◆ end_mg() [2/2]

template<int dim, int spacedim>

DoFHandler< dim, spacedim >::level_cell_iterator DoFHandler< dim, spacedim >::end_mg ( ) const

Iterator past the end; this iterator serves for comparisons of iterators with past-the-end or before-the-beginning states.

Definition at line 811 of file dof_handler.cc.

◆ n_dofs() [1/2]

template<int dim, int spacedim = dim>

types::global_dof_index DoFHandler< dim, spacedim >::n_dofs ( ) const

Return the global number of degrees of freedom. If the current object handles all degrees of freedom itself (even if you may intend to solve your linear system in parallel, such as in step-17 or step-18), then this number equals the number of locally owned degrees of freedom since this object doesn't know anything about what you want to do with it and believes that it owns every degree of freedom it knows about.

On the other hand, if this object operates on a parallel::distributed::Triangulation object, then this function returns the global number of degrees of freedom, accumulated over all processors.

In either case, included in the returned number are those DoFs which are constrained by hanging nodes, see Constraints on degrees of freedom.

Mathematically speaking, the number returned by this function equals the dimension of the finite element space (without taking into account constraints) that corresponds to (i) the mesh on which it is defined, and (ii) the finite element that is used by the current object. It also, of course, equals the number of shape functions that span this space.

◆ n_dofs() [2/2]

template<int dim, int spacedim = dim>

types::global_dof_index DoFHandler< dim, spacedim >::n_dofs ( const unsigned int level ) const

The (global) number of multilevel degrees of freedom on a given level.

If no level degrees of freedom have been assigned to this level, returns numbers::invalid_dof_index. Else returns the number of degrees of freedom on this level.

◆ n_boundary_dofs() [1/3]

template<int dim, int spacedim>

types::global_dof_index DoFHandler< dim, spacedim >::n_boundary_dofs ( ) const

Return the number of degrees of freedom located on the boundary.

Definition at line 889 of file dof_handler.cc.

◆ n_boundary_dofs() [2/3]

template<int dim, int spacedim = dim>

template<typename number >

types::global_dof_index DoFHandler< dim, spacedim >::n_boundary_dofs ( const std::map< types::boundary_id, const Function< spacedim, number > *> & boundary_ids ) const

Return the number of degrees of freedom located on those parts of the boundary which have a boundary indicator listed in the given set. The reason that a map rather than a set is used is the same as described in the documentation of that variant of DoFTools::make_boundary_sparsity_pattern() that takes a map. To this end, the type of the boundary_ids argument is the same as typename FunctionMap<spacedim,number>::type.

There is, however, another overload of this function that takes a set argument (see below).

◆ n_boundary_dofs() [3/3]

template<int dim, int spacedim>

types::global_dof_index DoFHandler< dim, spacedim >::n_boundary_dofs ( const std::set< types::boundary_id > & boundary_ids ) const

Return the number of degrees of freedom located on those parts of the boundary which have a boundary indicator listed in the given set. The

Definition at line 928 of file dof_handler.cc.

◆ block_info()

template<int dim, int spacedim = dim>

const BlockInfo& DoFHandler< dim, spacedim >::block_info ( ) const

Access to an object informing of the block structure of the dof handler.

If an FESystem is used in distribute_dofs(), degrees of freedom naturally split into several blocks. For each base element as many blocks appear as its multiplicity.

At the end of distribute_dofs(), the number of degrees of freedom in each block is counted, and stored in a BlockInfo object, which can be accessed here. If you have previously called distribute_mg_dofs(), the same is done on each level of the multigrid hierarchy. Additionally, the block structure on each cell can be generated in this object by calling initialize_local_block_info().

◆ n_locally_owned_dofs()

template<int dim, int spacedim = dim>

unsigned int DoFHandler< dim, spacedim >::n_locally_owned_dofs ( ) const

Return the number of degrees of freedom that belong to this process.

If this is a sequential DoFHandler, then the result equals that produced by n_dofs(). (Here, "sequential" means that either the whole program does not use MPI, or that it uses MPI but only uses a single MPI process, or that there are multiple MPI processes but the Triangulation on which this DoFHandler builds works only on one MPI process.) On the other hand, if we are operating on a parallel::distributed::Triangulation or parallel::shared::Triangulation, then it includes only the degrees of freedom that the current processor owns. Note that in this case this does not include all degrees of freedom that have been distributed on the current processor's image of the mesh: in particular, some of the degrees of freedom on the interface between the cells owned by this processor and cells owned by other processors may be theirs, and degrees of freedom on ghost cells are also not necessarily included.

◆ locally_owned_dofs()

template<int dim, int spacedim = dim>

const IndexSet& DoFHandler< dim, spacedim >::locally_owned_dofs ( ) const

Return an IndexSet describing the set of locally owned DoFs as a subset of 0..n_dofs(). The number of elements of this set equals n_locally_owned_dofs().

◆ locally_owned_mg_dofs()

template<int dim, int spacedim = dim>

const IndexSet& DoFHandler< dim, spacedim >::locally_owned_mg_dofs ( const unsigned int level ) const

Return an IndexSet describing the set of locally owned DoFs used for the given multigrid level as a subset of 0..n_dofs(level).

◆ locally_owned_dofs_per_processor()

template<int dim, int spacedim = dim>

const std::vector<IndexSet>& DoFHandler< dim, spacedim >::locally_owned_dofs_per_processor ( ) const

Return a vector that stores the locally owned DoFs of each processor. If you are only interested in the number of elements each processor owns then n_locally_owned_dofs_per_processor() is a better choice.

If this is a sequential DoFHandler, then the vector has a single element that equals the IndexSet representing the entire range [0,n_dofs()]. (Here, "sequential" means that either the whole program does not use MPI, or that it uses MPI but only uses a single MPI process, or that there are multiple MPI processes but the Triangulation on which this DoFHandler builds works only on one MPI process.)

◆ n_locally_owned_dofs_per_processor()

template<int dim, int spacedim = dim>

const std::vector<types::global_dof_index>& DoFHandler< dim, spacedim >::n_locally_owned_dofs_per_processor ( ) const

Return a vector that stores the number of degrees of freedom each processor that participates in this triangulation owns locally. The sum of all these numbers equals the number of degrees of freedom that exist globally, i.e. what n_dofs() returns.

Each element of the vector returned by this function equals the number of elements of the corresponding sets returned by global_dof_indices().

If this is a sequential DoFHandler, then the vector has a single element equal to n_dofs(). (Here, "sequential" means that either the whole program does not use MPI, or that it uses MPI but only uses a single MPI process, or that there are multiple MPI processes but the Triangulation on which this DoFHandler builds works only on one MPI process.)

◆ locally_owned_mg_dofs_per_processor()

template<int dim, int spacedim = dim>

const std::vector<IndexSet>& DoFHandler< dim, spacedim >::locally_owned_mg_dofs_per_processor ( const unsigned int level ) const

Return a vector that stores the locally owned DoFs of each processor on the given level level.

If this is a sequential DoFHandler, then the vector has a single element that equals the IndexSet representing the entire range [0,n_dofs()]. (Here, "sequential" means that either the whole program does not use MPI, or that it uses MPI but only uses a single MPI process, or that there are multiple MPI processes but the Triangulation on which this DoFHandler builds works only on one MPI process.)

◆ get_fe()

template<int dim, int spacedim = dim>

const FiniteElement<dim,spacedim>& DoFHandler< dim, spacedim >::get_fe ( const unsigned int index = 0 ) const

Return a constant reference to the selected finite element object. Since there is only one FiniteElement index must be equal to zero which is also the default value.

◆ get_fe_collection()

template<int dim, int spacedim = dim>

const hp::FECollection<dim,spacedim>& DoFHandler< dim, spacedim >::get_fe_collection ( ) const

Return a constant reference to the set of finite element objects that are used by this DoFHandler. Since this object only contains one FiniteElement, only this one object is returned wrapped in a hp::FECollection.

◆ get_triangulation()

template<int dim, int spacedim = dim>

const Triangulation<dim,spacedim>& DoFHandler< dim, spacedim >::get_triangulation ( ) const

Return a constant reference to the triangulation underlying this object.

◆ memory_consumption()

template<int dim, int spacedim>

std::size_t DoFHandler< dim, spacedim >::memory_consumption ( ) const

virtual

Determine an estimate for the memory consumption (in bytes) of this object.

This function is made virtual, since a dof handler object might be accessed through a pointers to this base class, although the actual object might be a derived class.

Definition at line 964 of file dof_handler.cc.

◆ save()

template<int dim, int spacedim = dim>

template<class Archive >

void DoFHandler< dim, spacedim >::save	(	Archive &	ar,
		const unsigned int	version
	)		const

Write the data of this object to a stream for the purpose of serialization.

◆ load()

template<int dim, int spacedim = dim>

template<class Archive >

void DoFHandler< dim, spacedim >::load	(	Archive &	ar,
		const unsigned int	version
	)

Read the data of this object from a stream for the purpose of serialization.

◆ clear_space()

template<int dim, int spacedim>

void DoFHandler< dim, spacedim >::clear_space ( )

private

Free all memory used for non-multigrid data structures.

Definition at line 1235 of file dof_handler.cc.

◆ clear_mg_space()

template<int dim, int spacedim>

void DoFHandler< dim, spacedim >::clear_mg_space ( )

private

Free all memory used for multigrid data structures.

Definition at line 1071 of file dof_handler.cc.

Friends And Related Function Documentation

◆ DoFAccessor

template<int dim, int spacedim = dim>

template<int , class , bool >

friend class DoFAccessor

friend

Make accessor objects friends.

Definition at line 1189 of file dof_handler.h.

◆ max_dofs_per_cell()

template<int dim, int spacedim>

unsigned int max_dofs_per_cell ( const DoFHandler< dim, spacedim > & dh )

Deprecated:: Use dh.get_fe_collection().max_dofs_per_cell().

◆ max_dofs_per_face()

template<int dim, int spacedim>

unsigned int max_dofs_per_face ( const DoFHandler< dim, spacedim > & dh )

This function exists for both non-hp and hp DoFHandlers, to allow for a uniform interface to query this property.

Deprecated:: Use dh.get_fe_collection().max_dofs_per_face().

◆ max_dofs_per_vertex()

template<int dim, int spacedim>

unsigned int max_dofs_per_vertex ( const DoFHandler< dim, spacedim > & dh )

This function exists for both non-hp and hp DoFHandlers, to allow for a uniform interface to query this property.

Deprecated:: Use dh.get_fe_collection().max_dofs_per_vertex().

◆ n_components()

template<int dim, int spacedim>

unsigned int n_components ( const DoFHandler< dim, spacedim > & dh )

This function exists for both non-hp and hp DoFHandlers, to allow for a uniform interface to query this property.

Deprecated:: Use dh.get_fe_collection().n_components().

◆ fe_is_primitive()

template<int dim, int spacedim>

bool fe_is_primitive ( const DoFHandler< dim, spacedim > & dh )

This function exists for both non-hp and hp DoFHandlers, to allow for a uniform interface to query this property.

Deprecated:: Use dh.get_fe(0).is_primitive().

Member Data Documentation

◆ dimension

template<int dim, int spacedim = dim>

const unsigned int DoFHandler< dim, spacedim >::dimension = dim

static

Make the dimension available in function templates.

Definition at line 300 of file dof_handler.h.

◆ space_dimension

template<int dim, int spacedim = dim>

const unsigned int DoFHandler< dim, spacedim >::space_dimension = spacedim

static

Make the space dimension available in function templates.

Definition at line 305 of file dof_handler.h.

◆ invalid_dof_index

template<int dim, int spacedim = dim>

const types::global_dof_index DoFHandler< dim, spacedim >::invalid_dof_index = numbers::invalid_dof_index

static

When the arrays holding the DoF indices are set up, but before they are filled with actual values, they are set to an invalid value, in order to monitor possible problems. This invalid value is the constant defined here.

Please note that you should not rely on it having a certain value, but rather take its symbolic name.

Deprecated:: Use numbers::invalid_dof_index instead.

Definition at line 319 of file dof_handler.h.

◆ default_fe_index

template<int dim, int spacedim = dim>

const unsigned int DoFHandler< dim, spacedim >::default_fe_index = 0

static

The default index of the finite element to be used on a given cell. Since the present class only supports the same finite element to be used on all cells, the index of the finite element needs to be the same on all cells anyway, and by convention we pick zero for this value. The situation is different for hp objects (i.e. the hp::DoFHandler class) where different finite element indices may be used on different cells, and the default index there corresponds to an invalid value.

Definition at line 330 of file dof_handler.h.

◆ block_info_object

template<int dim, int spacedim = dim>

BlockInfo DoFHandler< dim, spacedim >::block_info_object

private

An object containing information on the block structure.

Definition at line 1026 of file dof_handler.h.

◆ tria

template<int dim, int spacedim = dim>

SmartPointer<const Triangulation<dim,spacedim>,DoFHandler<dim,spacedim> > DoFHandler< dim, spacedim >::tria

private

Address of the triangulation to work on.

Definition at line 1032 of file dof_handler.h.

◆ fe_collection

template<int dim, int spacedim = dim>

hp::FECollection<dim,spacedim> DoFHandler< dim, spacedim >::fe_collection

private

Store a hp::FECollection object containing the (one) FiniteElement this object is initialized with.

Definition at line 1039 of file dof_handler.h.

◆ policy

template<int dim, int spacedim = dim>

std::unique_ptr<::internal::DoFHandlerImplementation::Policy::PolicyBase<dim,spacedim> > DoFHandler< dim, spacedim >::policy

private

An object that describes how degrees of freedom should be distributed and renumbered.

Definition at line 1045 of file dof_handler.h.

◆ number_cache

template<int dim, int spacedim = dim>

::internal::DoFHandlerImplementation::NumberCache DoFHandler< dim, spacedim >::number_cache

private

A structure that contains all sorts of numbers that characterize the degrees of freedom this object works on.

For most members of this structure, there is an accessor function in this class that returns its value.

Definition at line 1054 of file dof_handler.h.

◆ mg_number_cache

template<int dim, int spacedim = dim>

std::vector<::internal::DoFHandlerImplementation::NumberCache> DoFHandler< dim, spacedim >::mg_number_cache

private

Data structure like number_cache, but for each multigrid level.

Definition at line 1059 of file dof_handler.h.

◆ vertex_dofs

template<int dim, int spacedim = dim>

std::vector<types::global_dof_index> DoFHandler< dim, spacedim >::vertex_dofs

private

Array to store the indices for degrees of freedom located at vertices.

Definition at line 1161 of file dof_handler.h.

◆ mg_vertex_dofs

template<int dim, int spacedim = dim>

std::vector<MGVertexDoFs> DoFHandler< dim, spacedim >::mg_vertex_dofs

private

An array to store the indices for level degrees of freedom located at vertices.

Definition at line 1167 of file dof_handler.h.

◆ levels

template<int dim, int spacedim = dim>

std::vector<std::unique_ptr<::internal::DoFHandlerImplementation::DoFLevel<dim> > > DoFHandler< dim, spacedim >::levels

private

Space to store the DoF numbers for the different levels. Analogous to the levels[] tree of the Triangulation objects.

Definition at line 1173 of file dof_handler.h.

◆ faces

template<int dim, int spacedim = dim>

std::unique_ptr<::internal::DoFHandlerImplementation::DoFFaces<dim> > DoFHandler< dim, spacedim >::faces

private

Space to store DoF numbers of faces. They are not stored in levels since faces are not organized hierarchically, but in a flat array.

Definition at line 1182 of file dof_handler.h.

The documentation for this class was generated from the following files:

deal.II/dofs/block_info.h
deal.II/dofs/dof_handler.h
deal.II/dofs/dof_tools.h
source/dofs/dof_handler.cc

Classes

Public Types

Public Member Functions

Static Public Attributes

Related Functions

Cell iterator functions returning ranges of iterators

Additional Inherited Members

Detailed Description

template<int dim, int spacedim = dim> class DoFHandler< dim, spacedim >

Distribution of indices for degrees of freedom

Interaction with distributed meshes

User defined renumbering schemes

Serializing (loading or storing) DoFHandler objects

Constructor & Destructor Documentation

◆ DoFHandler() [1/3]

◆ DoFHandler() [2/3]

◆ DoFHandler() [3/3]

◆ ~DoFHandler()

Member Function Documentation

◆ operator=()

◆ initialize()

◆ distribute_dofs()

◆ distribute_mg_dofs() [1/2]

◆ distribute_mg_dofs() [2/2]

◆ has_level_dofs()

◆ has_active_dofs()

◆ initialize_local_block_info()

◆ clear()

◆ renumber_dofs() [1/2]

◆ renumber_dofs() [2/2]

◆ max_couplings_between_dofs()

◆ max_couplings_between_boundary_dofs()

◆ begin()

◆ begin_active()

◆ end() [1/2]

◆ end() [2/2]

◆ end_active()

◆ begin_mg()

◆ end_mg() [1/2]

◆ end_mg() [2/2]

◆ n_dofs() [1/2]

◆ n_dofs() [2/2]

◆ n_boundary_dofs() [1/3]

◆ n_boundary_dofs() [2/3]

◆ n_boundary_dofs() [3/3]

◆ block_info()

◆ n_locally_owned_dofs()

◆ locally_owned_dofs()

◆ locally_owned_mg_dofs()

◆ locally_owned_dofs_per_processor()

◆ n_locally_owned_dofs_per_processor()

◆ locally_owned_mg_dofs_per_processor()

◆ get_fe()

◆ get_fe_collection()

◆ get_triangulation()

◆ memory_consumption()

◆ save()

◆ load()

◆ clear_space()

◆ clear_mg_space()

Friends And Related Function Documentation

◆ DoFAccessor

◆ max_dofs_per_cell()

◆ max_dofs_per_face()

◆ max_dofs_per_vertex()

◆ n_components()

◆ fe_is_primitive()

Member Data Documentation

◆ dimension

◆ space_dimension

◆ invalid_dof_index

◆ default_fe_index

◆ block_info_object

◆ tria

◆ fe_collection

◆ policy

◆ number_cache

◆ mg_number_cache

◆ vertex_dofs

◆ mg_vertex_dofs

template<int dim, int spacedim = dim>
class DoFHandler< dim, spacedim >