#include <deal.II/opencascade/boundary_lib.h>

Inheritance diagram for OpenCASCADE::DirectionalProjectionBoundary< dim, spacedim >:

Public Member Functions
	DirectionalProjectionBoundary (const TopoDS_Shape &sh, const Tensor< 1, spacedim > &direction, const double tolerance=1e-7)

virtual Point< spacedim >	project_to_manifold (const std::vector< Point< spacedim > > &surrounding_points, const Point< spacedim > &candidate) const

Public Member Functions inherited from Boundary< dim, spacedim >
virtual	~Boundary ()

virtual void	get_intermediate_points_on_line (const typename Triangulation< dim, spacedim >::line_iterator &line, std::vector< Point< spacedim > > &points) const

virtual void	get_intermediate_points_on_quad (const typename Triangulation< dim, spacedim >::quad_iterator &quad, std::vector< Point< spacedim > > &points) const

void	get_intermediate_points_on_face (const typename Triangulation< dim, spacedim >::face_iterator &face, std::vector< Point< spacedim > > &points) const

virtual Point< spacedim >	project_to_surface (const typename Triangulation< dim, spacedim >::line_iterator &line, const Point< spacedim > &candidate) const

virtual Point< spacedim >	project_to_surface (const typename Triangulation< dim, spacedim >::quad_iterator &quad, const Point< spacedim > &candidate) const

virtual Point< spacedim >	project_to_surface (const typename Triangulation< dim, spacedim >::hex_iterator &hex, const Point< spacedim > &candidate) const

Public Member Functions inherited from FlatManifold< dim, spacedim >
	FlatManifold (const Tensor< 1, spacedim > &periodicity=Tensor< 1, spacedim >(), const double tolerance=1e-10)

virtual Point< spacedim >	get_new_point (const Quadrature< spacedim > &quad) const 1

virtual Point< spacedim >	get_new_point (const std::vector< Point< spacedim > > &surrounding_points, const std::vector< double > &weights) const

virtual void	add_new_points (const std::vector< Point< spacedim > > &surrounding_points, const Table< 2, double > &weights, std::vector< Point< spacedim > > &new_points) const

virtual Tensor< 1, spacedim >	get_tangent_vector (const Point< spacedim > &x1, const Point< spacedim > &x2) const

const Tensor< 1, spacedim > &	get_periodicity () const

Public Member Functions inherited from Manifold< dim, spacedim >
virtual	~Manifold ()

virtual Point< spacedim >	get_intermediate_point (const Point< spacedim > &p1, const Point< spacedim > &p2, const double w) const

virtual Point< spacedim >	get_new_point_on_line (const typename Triangulation< dim, spacedim >::line_iterator &line) const

virtual Point< spacedim >	get_new_point_on_quad (const typename Triangulation< dim, spacedim >::quad_iterator &quad) const

virtual Point< spacedim >	get_new_point_on_hex (const typename Triangulation< dim, spacedim >::hex_iterator &hex) const

Point< spacedim >	get_new_point_on_face (const typename Triangulation< dim, spacedim >::face_iterator &face) const

Point< spacedim >	get_new_point_on_cell (const typename Triangulation< dim, spacedim >::cell_iterator &cell) const

virtual Tensor< 1, spacedim >	normal_vector (const typename Triangulation< dim, spacedim >::face_iterator &face, const Point< spacedim > &p) const

virtual void	get_normals_at_vertices (const typename Triangulation< dim, spacedim >::face_iterator &face, FaceVertexNormals &face_vertex_normals) const

Public Member Functions inherited from Subscriptor
	Subscriptor ()

	Subscriptor (const Subscriptor &)

	Subscriptor (Subscriptor &&)

virtual	~Subscriptor ()

Subscriptor &	operator= (const Subscriptor &)

Subscriptor &	operator= (Subscriptor &&)

void	subscribe (const char *identifier=0) const

void	unsubscribe (const char *identifier=0) const

unsigned int	n_subscriptions () const

void	list_subscribers () const

template<class Archive >
void	serialize (Archive &ar, const unsigned int version)

Private Attributes
const TopoDS_Shape	sh

const Point< 3 >	direction

const double	tolerance

Additional Inherited Members
Public Types inherited from Manifold< dim, spacedim >
typedef Tensor< 1, spacedim >	FaceVertexNormals[GeometryInfo< dim >::vertices_per_face]

Static Public Member Functions inherited from Subscriptor
static ::ExceptionBase &	ExcInUse (int arg1, char *arg2, std::string &arg3)

static ::ExceptionBase &	ExcNoSubscriber (char arg1, char arg2)

Protected Member Functions inherited from Boundary< dim, spacedim >
const std::vector< Point< 1 > > &	get_line_support_points (const unsigned int n_intermediate_points) const

Detailed Description

template<int dim, int spacedim>
class OpenCASCADE::DirectionalProjectionBoundary< dim, spacedim >

A Boundary object based on OpenCASCADE TopoDS_Shape where new points are first computed by averaging the surrounding points in the same way as FlatManifold does, and then projecting them onto the manifold along the direction specified at construction time using OpenCASCADE utilities.

This class makes no assumptions on the shape you pass to it, and the topological dimension of the Manifold is inferred from the TopoDS_Shape itself. In debug mode there is a sanity check to make sure that the surrounding points (the ones used in project_to_manifold()) actually live on the Manifold, i.e., calling OpenCASCADE::closest_point() on those points leaves them untouched. If this is not the case, an ExcPointNotOnManifold is thrown.

Notice that this type of Boundary descriptor may fail to give results if the triangulation to be refined is close to the boundary of the given TopoDS_Shape, or when the direction you use at construction time does not intersect the shape. An exception is thrown when this happens.

Author: Luca Heltai, Andrea Mola, 2011–2014.

Definition at line 131 of file boundary_lib.h.

Constructor & Destructor Documentation

◆ DirectionalProjectionBoundary()

template<int dim, int spacedim>

OpenCASCADE::DirectionalProjectionBoundary< dim, spacedim >::DirectionalProjectionBoundary	(	const TopoDS_Shape &	sh,
		const Tensor< 1, spacedim > &	direction,
		const double	tolerance = `1e-7`
	)

Construct a Boundary object which will project points on the TopoDS_Shape sh, along the given direction.

Definition at line 110 of file boundary_lib.cc.

Member Function Documentation

◆ project_to_manifold()

template<int dim, int spacedim>

Point< spacedim > OpenCASCADE::DirectionalProjectionBoundary< dim, spacedim >::project_to_manifold	(	const std::vector< Point< spacedim > > &	surrounding_points,
		const Point< spacedim > &	candidate
	)		const

virtual

Perform the actual projection onto the manifold. This function, in debug mode, checks that each of the surrounding_points is within tolerance from the given TopoDS_Shape. If this is not the case, an exception is thrown.

The projected point is computed using OpenCASCADE directional projection algorithms.

Reimplemented from FlatManifold< dim, spacedim >.

Definition at line 123 of file boundary_lib.cc.

Member Data Documentation

◆ sh

template<int dim, int spacedim>

const TopoDS_Shape OpenCASCADE::DirectionalProjectionBoundary< dim, spacedim >::sh

private

The topological shape which is used internally to project points. You can construct such a shape by calling the OpenCASCADE::read_IGES() function, which will create a TopoDS_Shape with the geometry contained in the IGES file.

Definition at line 162 of file boundary_lib.h.

◆ direction

template<int dim, int spacedim>

const Point<3> OpenCASCADE::DirectionalProjectionBoundary< dim, spacedim >::direction

private

Direction used to project new points on the shape.

Definition at line 167 of file boundary_lib.h.

◆ tolerance

template<int dim, int spacedim>

const double OpenCASCADE::DirectionalProjectionBoundary< dim, spacedim >::tolerance

private

Relative tolerance used by this class to compute distances.

Definition at line 172 of file boundary_lib.h.

The documentation for this class was generated from the following files:

deal.II/opencascade/boundary_lib.h
source/opencascade/boundary_lib.cc

Public Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

template<int dim, int spacedim> class OpenCASCADE::DirectionalProjectionBoundary< dim, spacedim >

Constructor & Destructor Documentation

◆ DirectionalProjectionBoundary()

Member Function Documentation

◆ project_to_manifold()

Member Data Documentation

◆ sh

◆ direction

◆ tolerance

template<int dim, int spacedim>
class OpenCASCADE::DirectionalProjectionBoundary< dim, spacedim >